Name: 兒童玩具學習時間！VTech 恐龍彈珠迷宮與彈珠競賽，讓孩子樂在其中！ (Toy Learning For Kids with VTech Dinosaur Marble Maze and Marble Races!)
Uploaded: 2026-01-24T04:15:39.000Z
Duration: 10 min 44 s
Description: 【看影片學英語】數萬部 YouTube 影片，搭配英漢字典即點即查，輕鬆掌握單字發音與用法，長久累積看電影不必再看字幕。

In today's Playhouse video, we're going marbles with our Marble Rush Dino Track.

在今天的 Playhouse 影片裡，我們要來玩我們的 Marble Rush Dino Track 彈珠軌道。

It has lots of fun pieces like a bucket elevator, a spinning elevator and magnetic zip lines.

它有很多好玩的零件，像是儲物桶電梯、旋轉電梯和磁力滑索。

還有喔，一個吞食彈珠的恐龍。

And it has three different builds from Easy all the way up to Advanced, which we're gonna try today.

它有三種不同的組裝方式，從簡易到進階，今天我們要來試試看進階組裝。

So let's get the box open and get the pieces out so we can start building.

那我們就來打開盒子，把零件拿出來，準備開始組裝吧！

Let's dump it all out so we can see what we're working with.

我們把它全部倒出來，看看有哪些東西可以玩。

Now let's find the advanced build in the instructions.

現在我們來說明書裡找找進階組裝的部分。

And just like any building project, we'll start with the foundation.

就像任何組裝專案一樣，我們會從地基開始。

These big foundation pieces have 12 different rows and 1, 2, 3, 4 columns.

這些大的地基零件有 12 列和 1、2、3、4 欄。

所以我們可以把它們想成是 2x4。

And we'll set one more of our 2 by 4s next to the first one.

然後我們要把另一個 2x4 放在第一個旁邊。

To match our instructions, we're going to need a lot of two by one pieces.

為了符合說明書，我們需要很多 2x1 的零件。

Alright, now that we have our foundation in place, we can start building our marble maze.

好了，地基都弄好了，我們就可以開始組裝我們的彈珠迷宮了。

We'll start by placing our spinning elevator piece.

我們會先放上我們的旋轉電梯零件。

It goes here on the corner of the foundation.

Then we'll top it off with this sign that says T. Rex Dino Thrill Track Set.

然後我們再放上這個寫著 T. Rex Dino Thrill Track Set 的牌子。

We'll need lots of these blue connectors to help move the marbles along the track.

我們需要很多這種藍色的連接器來幫助彈珠在軌道上移動。

This gray straightaway piece will serve as a bridge from the elevator to the blue connector.

這塊灰色的直線軌道零件，會是從電梯接到藍色連接器的橋樑。

And then we'll use this small orange curved piece to connect the elevator to the other one.

然後我們會用這個小小的橘色彎曲零件，來連接電梯到另一個。

Now let's extend the track further down the foundation.

現在我們來把軌道延伸到地基更下方。

Another gray straightaway piece will connect the two pieces we just placed.

另一塊灰色的直線軌道零件，會連接我們剛剛放好的兩塊。

It'll keep the marbles from going the wrong direction.

它可以防止彈珠往錯誤的方向跑。

That way we can keep the track going the way we want it to.

這樣我們就可以讓軌道照我們想要的方向前進。

We can even stack the pieces to give our marble maze more than one level.

我們甚至可以堆疊零件，讓我們的彈珠迷宮不只一層。

And pieces like this twisty curve will help our marbles go from one level to the other.

像這種彎曲的軌道零件，會幫助我們的彈珠從一層到另一層。

Now we need to add some more supports to help our second level along.

現在我們需要加一些支撐，來幫助我們的第二層。

Since this piece is a semicircle or half a circle, the marbles that go along it will be turned 180 degrees.

因為這個零件是半圓形，沿著它滾動的彈珠會轉 180 度。

It's a magnetic zip line that'll let the marbles zip down the track.

這是一個磁力滑索，能讓彈珠沿著軌道快速滑下。

Now we need to add a few more supports so we can extend the track down to the bottom.

現在我們需要再加一些支撐，好把軌道延伸到底部。

And a few more track pieces will help guide our marbles along the way.

還有一些軌道零件能幫助引導我們的彈珠前進。

It'll Catch the marbles when they're done.

And I have to say, it almost looks like a marble hammock.

我得說，它看起來有點像彈珠吊床。

And this green curve will make sure that there are two ways to get to it.

而這個綠色的彎道會確保有兩種方式可以到達那裡。

Let's make a bit of a tower here so we can put our next piece on top.

我們來稍微搭個高塔，這樣我們就可以放上下一塊零件。

That'll send the marbles two different ways.

它會讓彈珠往兩個不同的方向前進。

And it's to catch the marbles and send them into the splitter.

它的作用是接住彈珠並將它們送進分流器。

This downward slope will catch the marbles to go this way.

這個向下的斜坡會接住彈珠，讓它們往這邊走。

And for the pieces that go to the right, we we have this really cool bucket elevator.

而往右邊的零件，我們有這個超酷的儲物桶電梯。

It can use its rotating arms to bring the marbles from the bottom all the way back up to the top.

它可以用旋轉的臂膀，把彈珠從底部一路帶回頂部。

Now let's build the structure and supports that'll bring the marbles to it.

現在我們來組裝結構和支撐，讓彈珠能送到那裡。

We'll need to make our pillars two blocks high so that the track can feed into the bucket elevator.

我們需要把柱子做成兩塊高，這樣軌道才能順利進入儲物桶電梯。

Now that we have the supports, we can fill in the rest of the track pieces here with our orange curve piece, completing the journey.

現在我們有了支撐，就可以用橘色的彎曲零件填滿剩下的軌道零件，完成旅程。

Now we can work on raising our track a little bit.

現在我們可以試著把軌道稍微墊高一點。

Let's add another splitter and top it off with another banana.

我們來加一個分流器，然後用另一個香蕉頭封頂。

Now let's see if we can get our track to loop around so we can get the marbles to come back to the bucket at the end.

現在我們來看看能不能讓軌道繞一圈，這樣彈珠就能回到最後的儲物桶。

This red slide will let the marbles go from the third level to the second.

這個紅色的滑道會讓彈珠從三樓跑到二樓。

Next, we'll need a bunch of pillars with our support pieces in place, we can use our track to fill in the gaps.

接下來，我們需要很多柱子，把支撐零件放好後，我們可以用軌道來填補空隙。

That'll give our marbles a way to get to the bucket from this side.

這樣我們的彈珠就有辦法從這邊送到儲物桶了。

And one more for the other side will be your left leg.

還有另一邊的這根，就是你的左腿。

If we open and close the dinosaur's mouth, it makes its tail go up and down.

如果我們打開和關閉恐龍的嘴巴，它的尾巴就會上下擺動。

That'll be an important mechanism for our marbles.

Now, don't eat any of the track while we're building.

現在，我們在組裝的時候，不要吃任何軌道喔。

We'll need to feed our dinosaur some snacks, so this spring loaded marble launcher should do the trick.

我們需要餵我們的恐龍吃點心，所以這個彈簧式彈珠發射器應該就夠用了。

And if our aim is good, this launching ramp will help guide the marbles into the dinosaur's mouth.

如果我們的目標準確，這個發射坡道將有助於引導彈珠進入恐龍的嘴裡。

Now let's connect our launcher to the ramp.

現在我們來連接發射器和坡道。

And then use this green curve to feed marbles into our launcher.

然後用這個綠色彎道把彈珠餵進發射器。

This gray corkscrew piece will give the marbles a path down another banana piece.

這個灰色的螺旋片會讓彈珠沿著另一個香蕉片往下。

And this part of the track will be good to go.

Let's Work on getting our track up to the spinning elevator.

我們來處理讓軌道接到旋轉電梯。

Another corkscrew piece will help the marbles travel vertically.

另一個螺旋片會幫助彈珠垂直移動。

This long piece has its own ridges that slow marbles down as they go along it.

這段長軌道有自己的紋路，可以減慢彈珠前進的速度。

We'll use it to connect our elevator to the rest of the track.

我們會用它來連接電梯和剩下的軌道。

Just a few more pieces and then we'll be ready to rock.

再幾個零件，我們就可以開始玩囉。

We just need a curved piece here and one more magnetic zip line to connect the two sections of the track.

我們只需要在這裡放一個彎曲的軌道片，再加上一條磁力滑索，就可以連接軌道的兩段了。

Alright, now that we built the track, let's jazz it up with a few decals.

好了，軌道蓋好之後，我們來貼上一些貼紙讓它更酷炫吧。

All right, now that's what I'm talking about.

太棒了，這才是我想要的樣子。

Now let's get our track ready for some marbles.

現在，我們來準備好我們的軌道，讓彈珠可以開始跑了。

We'll need to prime the spinning elevator by moving the platform down to the bottom.

我們要先讓旋轉電梯準備好，把平臺移到最下面。

That way, when a marble triggers it, they'll be spun all the way to the top of the elevator.

這樣，當彈珠觸發它時，就會被送到電梯的最頂端。

Then we can get our dinosaur ready to eat some marbles and finally flip the switch for our bucket elevator.

然後我們就可以準備好我們的吞食彈珠的恐龍，最後打開儲物桶電梯的開關了。

Alright, now that everything's set up, let's get some marbles.

好了，所有東西都設定好了，來拿一些彈珠吧。

Our dinosaur must have already got a hold of this red marble because it has claw marks on it.

這顆紅色的彈珠一定是我們的吞食彈珠的恐龍先拿到的，上面還有爪子的痕跡。

It looks like it's taken the path straight to the bucket, right into the dinosaur graveyard.

看來它直接走到了儲物桶，進了恐龍墳場。

Let's try this yellow marble with a fossilized egg on it to see if it takes a different path.

我們來試試這顆上面有化石蛋的黃色彈珠，看看它會不會走別條路。

But it looks like our dinosaur isn't quite ready to give up the marble just yet.

不過看來我們的恐龍還不想這麼快把彈珠吐出來。

A magnetic marble loaded directly in our launcher.

一顆磁力彈珠直接裝進我們的發射臺。