You might not remember the name, but you'll definitely remember the flip up camera.

你可能不記得它的名字

It's the one that swivels out of the phone like some kind R2D2 accessory.

但是你絕對記得它的翻轉鏡頭

We've done the durability test and we know the camera hinge is secure and the motor is

一個像r2d2的翻轉配件

rated for 100,000 flips.

我們完成了耐用度測試

But in order to see how it's all put together and learn how it works, we're going to have

而我們也知道了這個相機是很安全的

to review it from the inside.

而相機馬達也有十萬翻轉次數的壽命

It's time to teardown the Zenfone 6.

但為了看是怎麼把這些東西組裝再一起

Let's get started.

和觀看是如何運作的

[Intro]

我們將要看內部的零件

The Zenfone 6 is built like most other glass and metal smart phones with a large glass

是時候拆解zenfone 6了

panel on the back held on with adhesive.

讓我們開始吧

There's no water resistance rating on the Zenfone 6, so I assumed it would be easier

Zenfone6就像大部分的玻璃 金屬製的手機

to take apart, but I was wrong.

使用大型的玻璃背板

The adhesive holding the thing together is incredibly goopy and strong, and really hard

壓著黏合劑

to slice through.

Zenfone6沒有防水功能

But I eventually managed to make it happen, and I removed the glass.

所以我以為拆解會比較簡單

There is one long fingerprint scanner ribbon attaching the back panel to the phone still.

但是我錯了

I'll pop off that fingerprint scanner from the glass and set it off to the side.

這個黏合劑非常的黏稠

You'll also want to watch out for the fragile Google Assistant ribbon cable that's super

讓人非常難去划開

close to the edge of the phone.

但我還是成功的移除玻璃背板

I went ahead and accidentally on purpose sliced mine in half as an example of what not to

有一個很長的指紋辨識附在背板上

do and what you should avoid.

我要把指紋辨識彈出來

The phone should still work though, even if I did kill the assistant.

然後把它放在旁邊

There are 7 Philips head screws holding down the black plastic plate, then I can unsnap

同時也要注意脆弱的google助理排線

the fingerprint scanner ribbon and lift off those plastics.

它非常的靠近手機邊緣

The NFC coil comes off as well.

在我拆解時意外的將它切成兩半

I thought at first this might make a cool looking transparent phone, but then I changed

這是一個應該要注意 和避免的地方

my mind, mostly because the majority of the flippy camera is hidden underneath the metal

但是手機還是可以運作 即使我破壞了GOOGLE助理

camera housing and would not be visible in a clear phone.

有七個螺絲壓著黑色塑膠板

Let's take a closer look.

而我可以掀開指紋辨識了

I'll unplug the battery from the motherboard for safety since we do want this phone to

然後把這片塑膠拿開

turn on again someday.

NFC線圈也跟著一起脫落了

And I'll grab the singular battery pull tab down here at the bottom.

我還以為將這台手機做成透明背板會很好看

But then, without even pulling, the battery falls away from the phone basically all on

但是我改變主意了

it's own.

因為大部分的相機零件都隱藏在下方

That's a pleasant flaw in the assembly process for me.

而在透明背板時也看不到

Thumbs up for an accidentally too easy battery removal.

讓我們更仔細的看

The Zenfone 6 has a massive 5000 milliamp hour battery, which is twice the capacity

為了安全 先把主機板的電源線拔開

of the iPhone XS.

因為未來我還想要開啟這台手機

You can see the two pretty worthless battery adhesive strips down here pretending to do

我要把電池拉條拉出來

their jobs.

但是 在沒有拉的情況下

I'll unclip the two extension ribbons like little Legos, then the metal camera housing

電池就自己掉下來了

up here at the top is held in place by 4 more screws.

這對我的拆機過程來說是一個很好的缺陷

Two additional screws already got removed with the back plastics.

對太簡單的電池拆解給一個讚

Once those are out, I can gently lift away part of the metal structure from around the

Zenfone 6 配有一個巨大的5000mAh電池

top of the camera and I can slide the little edge of the bracket out from underneath the

是Ipohne Xs的兩倍大

motherboard.

你可以看到兩個沒有用的電池黏合膠帶

Even with that support bracket now gone, the camera is still solidly in position.

假裝有在做他們的工作

We can see a bit more of the motor and gear as the camera flips back and forth.

我要把兩個延長線鬆開 就像是小樂高

No long stepper motor shaft this time around like we've seen in some of the pop up camera

而中間的鏡頭殼還有四個螺絲

phones.

有兩個螺絲在拆解黑色塑膠板的時候就已經移除了

The Zenfone 6 has just one gear going straight from the motor to the camera.

將它們移除後我就可以慢慢的將上方的金屬構造從鏡頭移開

The camera control ribbon connector is also very different.

而也可以拿開在主機板下的支架了

It's not like the little Lego style this time around.

即使輔助支架不見了

I'll remove the one motherboard screw and disconnect the 3 additional ribbon cables,

鏡頭的狀態還是很堅實

and two more wire cables, and then lift the motherboard out and away from the frame, revealing

我們可以看到更多的鏡頭翻轉馬達和零件

yet another motherboard like some kind of high tech Oreo cookie with pink frosting inside.

不像大部分的彈出式鏡頭手機有著步進馬達

There are two different motherboards.

Zenfone6只有一個零件連著馬達

I'm not sure what the overall goal with that thermal paste is though.

相機的控制線也非常的不同

Each motherboard is heating up and transferring the heat right back into the other motherboard.

不像是以前的樂高風格

I'm no expert, but using functional motherboards as heat sinks seems counter intuitive.

我將把一個主機板的螺絲移除

There are two more screws holding down that flippy metal camera unit bringing the total

然後解開三個排線

up to 8 screws.

和兩個電線

Then I'll detach another one of those strange connectors, and after a bit of shimmying and

然後將主機板從框架移除

unplugging the motor connector, the whole camera contraption can come out of the Zenfone

而另一個主機板露出來了

6.

就像是有著高科技的粉紅色內餡Oreo餅乾

It looks like these odd connectors can be unplugged, but the appear to be a bit more

有著兩個不同的主機板

fragile and require more finesse.

我不確定在這裡放導熱膏的目的是什麼

Not a huge fan.

兩個主機板再發熱時會互相傳熱

Either way, the camera is out now and we can get a close up look at the attached motor.

我不是主機板散熱的專家 但是這個設計 有悖常理

Positioned off to the side, it has a direct connection with the hinge of the camera.

有兩個額外的螺絲鎖著翻轉鏡頭

The brackets that secure the camera require 8 different screws, which I imagine is what

在翻轉鏡頭上總共有八個螺絲

kept the camera so structurally solid during my durability test.

然後我將其中一個奇怪的連結器分開

Let's take a quick look at the bottom motherboard.

在經過一些搖晃跟拆開馬達連結器

The dual SIM and SD card slot is on the lower motherboard, with a circular white water damage

整個相機零件就可以從Zenfone6出來了

indicator next to the opening.

這個奇怪的連結器看起來可以拆除

The loudspeaker is down at the bottom of the phone and has 6 screws holding it in place

但是它看起來很脆弱

over the lower electronics.

和拆解上需要更溫柔

And once it's removed we see another water damage indicator on top of the headphone jack.

我不喜歡這種設計

There is one screw holding down the charging port board, along with one more large Lego

無論如何 現在相機模組已經移除了

style ribbon connector.

我們可以更仔細的觀察附在上面的馬達

Then the charging port can lift up and out of the phone.

它直接連結在馬達的旁邊

The USB-C charging port does have a black rubber ring around the tip to help cushion

這個保護鏡頭托架需要八個不同的螺絲

the port and provide some water resistance, but as a whole, the phone is not water resistant

我想這就是在耐用度測試時

at all.

鏡頭結構堅固的原因了

The front screen is permanently glued to the metal housing like we've seen in a lot of

讓我們快速看一下主機板

other glass and metal phones.

雙SIM卡和SD卡槽

It can be replaced, it's just difficult.

是在下方的主機板

It's time we get everything situated back inside of the Zenfone 6 so I can clean up

有著白色的進水跡象

the mess I made with all the internal guts spread out everywhere on my desk.

揚聲器在手機的底部

Before putting the motherboard sandwich back together, I do need to clip in the strange

而有六個螺絲鎖著

camera cables that Asus is using.

在移除之後 我們在耳機孔上方看到另一個進水的跡象

Still not a huge fan.

有一個螺絲鎖著充電口

They don't slide in easily like the Lego style ribbons, and it makes the whole repair much

沿著另一個樂高風格的排線

more difficult.

然後充電孔就可以拔起來了

Finally, after hopefully getting it clicked in, I can put the Oreo motherboard halves

USB-C充電孔有著黑色橡膠圈在附近

together with the strawberry frosting in the middle.

來緩衝充電孔 也提供了一些防水能力

Then I'll get the black camera cable plugged in, along with all the other more normal Lego

但是整體上 手機還是不防水的

style connectors for the top motherboard.

螢幕黏在金屬外殼

The metal camera bracket gets secured onto the camera housing with it's 4 remaining screws

就像我們看到的玻璃 金屬手機

holding it in place.

它可以被替換 但是很困難

Then the battery can get set into the phone and plugged in, along with the fingerprint

是時候把所有零件裝回到Zenfone6了

scanner and back plastics.

也可以釐清我在內部製造了多少混亂

The fingerprint scanner gets placed directly back into the rear glass panel, and I can

在放回主機板三明治之前

set the whole thing back down onto the phone.

我需要放入asus使用的詭異相機排線

And luckily everything still turns on.

還是不太喜歡這個設計

Overall I'm a fan of the Zenfone 6.

它們不像樂高風格的排線一樣簡單

I like seeing phones do new and unique stuff.

也使得整體上的維修難度增加

Yeah, the motherboard sandwich is kind of strange.

終於 在把它裝進去之後

We should watch that for overheating, but the internal camera and bracket both look

我可以把OREO主機板和中間的草莓內餡做結合

pretty solid.

然後把黑色的相機排線插入

I'm not a fan of those camera connectors though, as it appears my camera is malfunctioning

並順著主機板 將所有普通的樂高連結插入上層主機板

at the moment, but at least the phone itself still works.

中間的相機托架也隨著四個剩餘的螺絲固定在了外殼上

You win some, you lose some.

然後電池也可以放入手機了

It was still worth it to see the insides.

然後插入連結線

Would you rather have a phone with a flip up camera, or a pop up camera?

接著是指紋辨識器和黑色塑膠板

Let me know down in the comments.

指紋辨識也直接的放在後面板上

Come hang out with me on Instagram and Twitter.

然後就把所有東西裝回去了

Hit the subscribe button if you haven't already.

幸運的是 所有的東西都還能用

And thanks a ton for watching.

總體來說 我是Zenfone6的粉絲

I'll see you around.

我喜歡有著創新和獨特裝置的手機