DIY phone projects that will leave you speechless!

Hey Sara! You look great today.

Oh, thank you! No offence but you look kind of boring.

Can I pimp you up?

Umm, really?

OK, let's do it!

The phone agrees, I'm super excited, so forget plain phone cases and let's make 20 awesome

phone DIYs. Come on!

Ah, this happens to me all the time!

The screen of my phone gets all scratched when I carry it in my bag or pocket.

To prevent this from happening let's make an adorable phone pouch out of fuzzy socks!

That's right – this cute pouch is made out of a sock, no sewing required and it takes

no more than a minute to make!

Take a fuzzy sock of your choice - I went for the pink one.

Grab your scissors and cut the top part – which is the part above the ankle.

You need a piece that is big enough for your phone.

Apply a stripe of hot glue along the opening on one side of your pouch.

You can even sew it if you prefer.

Turn the pouch inside out and now you can decorate it however you like!

I decided to stick on a pair of googly eyes to give a face to this fuzzy cutie.

And of course who doesn't love bows!

I'm sticking one in the corner of the pouch to make it even more adorable.

What an epic DIY project right?

Phone pouches can be super expensive and I bet they aren't even half as pretty as this one.

Besides looking extremely cute, this phone pouch feels so snugly!

It's almost like a plushy.

It will keep your phone protected from scratches even if you throw it in the bag together with

keys and other sharp objects!

If you're not using a phone pouch, you definitely need a cool case to protect your phone.

Check out this amazing beaded one!

I love everything about it – the design, the colors, the texture...

It is just so unique and cool!

To make it we're going to need a bunch of beads.

You know me - I'm obsessed with colors so I went for the brightest colored beads out there.

Get your pegboard ready and using a clear phone case measure how big design you need

to make.

It's time to get creative!

Start placing colored beads on the pegs, creating any kind of shape or word that you like.

I decided to write LOL and I also made a huge hot pink heart above it.

If you use black beads to outline your shapes or words, the design will turn out bolder

and more cartoon-y like, which I love!

Here are the last two beads so let's quickly seal our masterpiece.

Take some parchment paper, place it on top of your work and run the iron over the entire

surface.

Heat will melt the beads and stick them together.

Lift the beaded creation from the pegboard and we're ready to glue it on a clear case

or any old case that you want to recycle.

I'm using a glue gun for this but any kind of glue with a good hold will work.

Our new phone case is all ready, looking amazing!

This is just so unique and I've never seen something like it in a store.

Also love the beaded texture and the fact that you can literally write or draw anything

using this technique.

You can write your name and use the colors that you love!

Or make this case for your bestie!

I'm sure anyone would be super happy to have a gorgeous case like this.

Ouch!

How many times has this happened to you?

Please tell me I'm not the only one who slaps own face with a phone on a regular basis.

But this ain't happening again – we're making our own DIY pop sockets!

Did you know that you can use drawer or cabinet knobs as pop sockets?

I have this pretty glass one that will work perfectly.

All we got to do is glue it on a phone case and we're done!

I want to make my solid pink case a bit more special and the easiest way to do this is

using stickers.

I especially like puffy stickers as they give a cool texture and 3D feel to your case.

I decorated mine with a bunch of little pony stickers and it turned out super girly and

adorable!

The pop socket will give you a great grip when taking selfies, recording musicallys

plus it looks super pretty and sparkly.

You can find an amazing selection of cool knobs like this in stores and they are quite

affordable too.

An even better idea is to use old knobs and recycle them.

And don't stress out if yours is plain and boring like this wooden one.

You can pimp it up!

Color the knob with spray paint or acrylic paint.

I chose yellow as I want to make a heart face emoji on my pop socket.

Now take your sharpies and decorate it however your heart desires.

I'm drawing two red hearts for the eyes and a big happy smile to my pop socket.

I decided to glue it on a transparent case but we got to decorate it first.

A great way is to use a piece of denim fabric and a couple of iron on patches.

Now it's time to attach this adorable buddy on the case.

Take a glue gun and stick your emoji pop socket on the denim patched case.

All done and looking fabulous!

The denim phone case with patches is so unique and trendy.

And the emoji pop socket makes it even more epic!

I love how these two look together.

A match made in heaven!

In my previous video I show how to make an aquarium in a jar and guess what today we're

making an aquarium in a phone case!

I know it sounds insane but see how legit this looks.

A real aquarium with fish, water, glitter bubbles and all that.

You'll need a silicone phone case, 2 small acetate sheets, parchment paper, blue food

coloring, glitter, some fish charms, baby oil and an iron.

Place the acetate sheets into the fold made from a piece of baking paper and iron along

the edge.

Heat will melt the plastic and seal the two sheets together.

One side is done, we still have to melt these two.

When the plastic melts it turns white.

That's when I know it is 100% sealed and waterproof.

Before ironing the fourth edge, we need to fill this pocket up.

I'm starting with glitter!

I went for these blue dots which will represent oxygen bubbles.

Pour them into the aquarium pocket with a help of a funnel.

Prepare a small amount of baby oil and some water.

To make the water blue, mix in a bit of blue food coloring.

Now we can pour these into the acetate pocket.

First comes the baby oil, which doesn't mix with water so together they will create an

awesome lava effect.

Pour in the blue water and as you can see, baby oil has lower density, therefore it floats

above it.

Our aquarium is not complete without these cute fish!

I actually made these charms myself using common household items.

The first fish is ready to jump into the aquarium!

But it needs a friend so here comes the fish number two.

Let's pop in a little starfish as well, because the more, the merrier, right?

Time to iron the remaining top edge to seal our aquarium pocket completely.

Shake your pocket to distribute the fish and glitter allover the aquarium and check out

how cool it turned out.

Take a pen plus a ruler and sketch a rectangle leaving about 5 millimeters wide frame along

the edges.

Go ahead and carefully cut along all these lines using an exacto knife.

Now we can remove the silicone rectangle in the middle and we're left with the frame for

the aquarium.

So grab that beautiful aquarium pocket, which we made earlier and place it inside the silicone frame.

We did it! How creative and special is this phone case?!

The only pet I ever had was a little gold fish years ago.

Maybe that's why I like aquarium DIYs so much!

But also I simply love how unconventional and insane this is – having an aquarium

on your phone – Amazing!

The world has been going crazy over fidget spinners lately and I must admit – they

are actually super fun to play with.

So why not having one always on hand!

You can use your fidget spinner as a pop socket!

How brilliant is that?!

The coolest pop-socket ever for sure!

Also, don't you just love this awesome galaxy phone case?

Well guess what - I'll show you how to DIY it!

Print a galaxy picture of your choice and cut out a piece, which is of the same size

as your phone.

This one fits mine perfectly.

Place it in the clear case and you have the coolest galaxy phone case ever!

Let's make it even more epic by adding a fidget pop-socket.

Apply some glue on the middle of the case and place on any kind of small rounded object.

I'm just using the lid of an old lip balm.

Add a bit more glue on top of that and stick on the fidget spinner.

There we have it - our galactic fidget spinner phone case!

It is so much fun to play with plus it gives a great grip when holding your phone.

I'm sure all your friends will be like what?

Where did you get that!

The beauty of DIY–ing!

You can make so much cooler stuff than you could ever buy in stores!

Another crazy awesome idea for a DIY pop socket is using a fake flower!

I'm using daisies because they're one of my faves.

You will also need a little suction cup like this one.

Apply a blob of glue on the top part and place on your flower.

Now I just like to pop it on the phone case without glue.

This way you can remove it from the case any time.

However if you want to make your pop socket more sturdy, use a bit of glue and stick it

on permanently.

This floral pop socket turned out super cute and it took us no more than a minute to make.

Bingo!

How about making our case look like a delicious birthday cake with a yummy pink glaze dripping

down and a ton of holographic sprinkles?

Umm... yes please and thank you!

All you need to make this beautiful phone case is some nail polish.

I'm starting up with hot pink!

Slowly pour some of that polish, while you keep moving across the the entire width of

the phone case.

You don't need to use a lot of polish at all.

Let's repeat the step with a slightly lighter pink color.

Pour it across the phone and wait for the color to drip along the case.

This already looks pretty but we aren't quite done yet.

Take the lighter pink nail polish and color the entire top part of the case like me.

You may need two coats to make it completely opaque.

Now our design will look super neat and pretty.

The last step is to grab any kind of glitter or confetti polish and apply it on top of

the pink.

This will represent the sprinkles on the glaze.

I have holographic stripes but colorful ones would look amazing as well!

How gorgeous does it look when sprinkles catch the light?!

Wow, love it!

Wait for the paint to dry and your phone is ready to wear the most yummy looking costume ever.

Cute store bought phone cases can be so expensive, while you get plain ones for very cheap and

you can customize them however you like.

I love this one so much but there are more epic phone cases coming up in this video.

Just you wait!

What?

Ugh!

Are your earphones getting tangled all the time?

Mine definitely do and I hate that!

Luckily here's an epic DIY project which will assure that our headphones will never get

tangled again.

Plus they will look super cute!

Stick the end of your earphones in place with a piece of tape.

Take a piece of fluffy or regular yarn and make a knot around the cable.

Grab the longer piece of yarn and make a 4 shape over the cable, lead the yarn end under

the cable and up through the loop.

Pull to tighten the knot.

Now you need to simply repeat making these exact knots all along your headphones.

Make a 4 shape, go under the headphones, up through the loop and tighten.

If you like you can switch up the colors.

Cut away the excess yarn and continue with a yarn of different color.

I decided to alternate between the mint green and pink.

Rainbow headphones would look amazing too!

Here comes my last knot so let's snip off the excess yarn and these amazing headphones

are finished.

All that's left to do is to plug them into the phone, play your favorite song and dance