Name: 如何航行 - 2H Asym.Spinnaker - 第二部分7：如何工作。小帆 - 第二部分的7：它是如何工作的。 (How to Sail - 2H Asym. Spinnaker - Part 2 of 7: How it works)
Uploaded: 2021-01-14T06:53:11.000Z
Duration: 2 min 19 s
Description: 【看影片學英語】數萬部 YouTube 影片，搭配英漢字典即點即查，輕鬆掌握單字發音與用法，長久累積看電影不必再看字幕。

We recommend that to start with you practise on light wind days where things happen slowly.

When afloat the first point to understand is when you can actually hoist the sail. And

Working together, the helmsman and crew balance the boat to keep it flat. The crew then pulls

the spinnaker up using the halyard. This might feel tight because pulling the sail up also

pulls the bow sprit out. Watch yourself here as the sail will suddenly pull free from the

spinnaker chute, so make sure that you are balanced or even seated to do this. The crew

then locks the halyard in the jam cleat. Look above to check the sail is fully hoisted.

The crew then moves to pick up the leeward control sheet. This is the one on the same

Tension in the spinnaker sheet is crucial to successful spinnaker sailing. To find the

best position for the sheet, the crew must constantly be easing and tightening the sheet

in small amounts whilst keeping a keen eye on the leading edge of the sail. The crew

releases the sheet until the leading edge of the sail just starts to curl. When this

point is reached or the sail starts to flap, the crew then pulls the sheet back to the

This action is continually repeated. As you get better the leading edge should just be

flicking with the sheet being released and tightened by just a few inches at a time.

At this point the sail is set for the optimum airflow and generates the maximum power  or drive.