Know what this is? It's the longest word in the world.

Like, anywhere, in any language, ever.

More than 189,000 letters.

If you were to write it down, though I don't know why you would, it'd fill up more than

100 pages!

And if you could actually say it without, like, breaking your face, it'd take about

FIVE hours!

So what the frick is this word?

It's the name of the longest known protein on earth. And it's actually in you right now.

Because of its enormous size, it was given the nickname Titin by scientists.

And that's with two i's.

It's a protein that helps give some of the springiness to your muscles.

Today we're going to be talking about DNA and how it, along with three versions of its

cousin RNA, unleash chemical kung fu to synthesize proteins just like this.

This is going to take a while to explain, so how about if we make ourselves some hot pockets.

Mmmm, my favorite. Ham and cheese.

Every time I take a bite I wonder, how do they do it?

How do they pack exactly the same flavor into every foil-cardboard wrapped foodish item?

Clearly there has got to be some super secret instruction manual kept in a location known

to only two people.

And since I'm talking about biology here, that brings up a related question:

How did I get built from the DNA instructions and biological molecules we've been talking about?

Today, that's what I'm going to do. Not actually make hot pockets, or a person.

But I'm going to be talking about DNA transcription and translation

which is how we get made into the delicious things we are today.

Though hopefully none of us know how delicious people are.

Animals, plants, and hot pockets are really nothing more than salty water, carbohydrates,

fats, and protein, combined in precise proportions following very explicit instructions.

Let's say I want to make my own hot pocket. I would have to:

1) break into the lair of the Hot Pocket Company holding the secret manual

2) read the instructions on how to make the machinery to produce the hot pocket and the

proportions of the ingredients

3) quickly write down that information in shorthand before I get caught by the hot pocket police

4) go home and follow the instructions to build the machinery and mix the ingredients

until I have a perfect hot pocket. That's how we get us.

Very simply, inside a cell's nucleus, the DNA instruction manual is copied gene by gene

by transcription onto a kind of RNA

then taken out of the lair where the instructions are followed, by the process of translation

to assemble amino acid strings into polypeptides or proteins that make up all kinds of stuff

from this titin down here to the keratin in my hair.

But most of the polypeptides that get made aren't structural proteins like hair, they're enzymes

which go on to act like the assembly machinery, breaking down and building and combining carbohydrates

and lipids and proteins that make up variations of cell material.

So enzymes are just like whatever ingenious machinery 'they' use at the factory to make this.

Let's start in the lair -- I mean the nucleus.

The length of DNA that we're going to transcribe onto an RNA molecule is called our transcription unit.

Let's say, in today's example, that it's going to include the gene that transcribes

for our friend titin

which, in humans at least, occurs on Chromosome 2.

Now each transcription unit has a sequence just above it in the strand

and that's called "upstream"

biologists call that "upstream" on the strand

And that sequence defines where the transcription unit is going to begin.

This special sequence is the promoter, and it almost always contains a sequence of two

of the four nitrogenous bases we discussed in our last episode: adenine (A), thymine (T)

cytosine (C) and guanine (G).

Specifically, the promoter is a really simple repetition

we've got thymine, adenine, thymine, adenine, and then A-A-A.

And on the other side: ATATTTT. Because you know how this works, right!?

This is called the TATA box. It's nearly universal and helps our enzyme figure out where to bind to the strand.

Now, you'll remember from our episode about DNA structure that DNA strands run in one

of two directions

depending on which end of the strand is free and which end has a phosphate bond.

One direction is 5 prime-3 prime, and the other is 3 prime-5 prime.

In this case, upstream means toward the 3 prime end and downstream means toward 5 prime.

So the first enzyme in this process is RNA polymerase, and it copies the DNA sequence

downstream of the TATA box

that's towards the 5' end and copies it into a similar type of language:

messenger RNA [mRNA].

Quick aside: So you'll notice that to read the DNA in order to make enzymes we need an

enzyme in the first place.

So it kind of gets "chicken vs egg" here.

We need the enzyme to make the DNA and the DNA to make the enzyme.

So, where did RNA polymerase come from if we haven't made it yet!?

What an excellent question! It turns out all of these basic necessities get handed down

from Mom.

She packed quite a bit more into her egg cell than just her DNA so we had a healthy start.

So, thanks Mom!

So the RNA polymerase binds to the DNA at that TATA box, and begins to unzip the double-helix.

Working along the DNA chain, the enzyme reads the nitrogenous bases, those are the letters

and helps the RNA version of the nitrogenous bases floating around in the nucleus find their match.

Now as you ALSO might recall from our previous episode

nitrogenous bases only have one counterpart that they can bond with.

But RNA, which is the pink one here, doesn't have thymine like DNA does

which is the green and the blue.

Instead it has uracil (U), so U appears here in T's place as the partner to adenine.

As it moves, the RNA polymerase re-zips the DNA behind it and lets our new strand of messenger

RNA peel away.

Eventually, the RNA polymerase reaches another sequence downstream, called a termination

signal, that triggers it to pull off.

Now, some finishing touches before this info can safely leave the lair.

First, a special type of guanine (G) is added to the 5-prime end

that's the first part of the mRNA we copied

and this is called the 5' cap.

On the other end, it looks like I fell asleep with my finger on the A key of my keyboard

but another enzyme added about 250 adenines on the 3' end.

This is called the poly-A tail.

These caps on either end of the RNA package make it easier for the mRNA to leave the nucleus

and they also help protect it from degradation from passing enzymes, while making it easier

to connect with other organelles later on.

But that's still not the end of it. As if to try to confuse me to protect the secret

hotpocket recipe

the original recipe book also contains lots of extra, misleading information.

So just before leaving the nucleus, that extra information gets cut out of the RNA in a process

called RNA splicing.

And it's. something. like. editing. this. video.

The process is really complicated, but I just had to tell you about two of the key players

because they have such cool names.

One, the Snurps, which are Small Nuclear RibonucleoProteins.

These are a combination of RNA and proteins, and they recognize the sequences that signal

the start and end of the areas to be spliced.

Snurps bunch together with a bunch of other proteins to form the spliceosome, which is

what does the actual editing

as it were, breaking the junk segments down so their nitrogenous bases can be reused in

DNA or RNA, and sticking together the two ends of the good stuff.

The good stuff that gets spliced together, by the way, are called exons because they'll

eventually be expressed

the junk that gets cut out are just intervening segments, or introns.

The material in the introns will stay in the nucleus and get recycled.

So for instance, titin down there is thought to have hundreds of exons when it's all said and done

probably more than 360, which may be more than any other protein.

And it also contains the longest intron in humans, some 17,000 base pairs long.

Man, titian! It is just a world record holder!

So now that it has been protected and refined, the messenger RNA can now move out of the nucleus.

OK, a quick review of our Hot Pocket Mission Impossible caper so far:

We broke into the lair containing the instructions, we copied down those instructions in shorthand

we added some protective coatings, and then we cut out some extra notes that we didn't need

and then we escaped back out of the lair.

Now I have to actually read the notes, make the machinery and assemble the ingredients.

This process is called translation.

So next, rewind your memory -- or just watch that video again -- to the episode about animal cells.

Do you remember the rough endoplasmic reticulum? I hope you do.

Those little dots on the membranes are the ribosomes, and the processed messenger RNA

gets fed into a ribosome like a dollar bill into a vending machine.

Ribosomes are a mixture of protein and a second kind of RNA, called ribosomal RNA [rRNA]

and they act together as a sort of work space.

rRNA doesn't contribute any genetic information to the process, instead it has binding sites

that allow the incoming mRNA to interact with another special type of RNA

the third in this caper, called transfer RNA, or tRNA.

And tRNA really might as well be called 'translation RNA' because that's what it does

it translates from the language of nucleotides into the language of amino acids and proteins.

On one end of the tRNA is an amino acid. On the other end is a specific sequence of three

nitrogenous bases.

These two ends are kind of matched to each other.

Each of the 20 amino acids that we have in our body has its own sequence at the end.

So if the tRNA has the amino acid methionine on one end, for instance, it can have UAC,

as the nucleotide sequence on the other.

Now it's like building a puzzle. The mRNA slides through the ribosome.

The ribosome reads the mRNA three letters at a time - each set called a triplet codon.

The ribosome then finds the matching piece of the puzzle: a tRNA with three bases that

will pair with the codon sequence.

That end of the tRNA, by the way, is called the anticodon.

Sorry for all the terminology.

YOU NEED TO KNOW IT!

And of course, by bringing in the matching tRNA, the ribsome is also bringing in whatever

amino acid is on that tRNA.

Ok so, starting at the 5' end of the mRNA that's fed into the ribosome, after the

5' cap, for almost every gene, you find the nucleotide sequence AUG on the mRNA.

The ribosome finds a tRNA with the anticodon UAC, and on the other end of that tRNA is methionine.

The mRNA, like a mile-long dollar bill, keeps sliding into the ribosome so that the next

codon can be read, and another tRNA molecule with the right anticodon binds on.

If the codon is UUA, the matching tRNA has AAU on one end and Leucine on the other

and if the mRNA has AGA, the matching tRNA has UCU on one end and Arginine on the other.

In each case that new amino acid gets connected to the previous amino acid - starting a polypeptide chain.

Which is the beginning, the very beginning of a protein.

But it turns out there are LOTS of different ways to read this code.

'Cause UUA is not the only triplet that codes for Leucine -- UUG does too!

And argenine is coded for by six different triplets!

This is actually a good thing. It means that we can make a few errors in copying, transcribing

and translating DNA, and we won't necessarily change the end product.

This process continues, with the mRNA sliding in a bit, the ribosome bringing in a tRNA

with an amino acid, that amino acid binding to the existing chain

and on and on, sometimes for thousands of amino acids to make a single polypeptide chain,

for example.

This whole word is basically just the names of the amino acids in the sequence in the

order in which they occur in the protein

all 34,350 of them.

But before we can make our own hot pockets

and that string of amino acids becomes my muscle tissue

we have some folding to do.

That's because proteins, in addition to being hella big, can also contort into very

complex and downright lovely formations.

One key to understanding how a protein works is to understand how it folds, and scientists

have been working for decades on computer programs to try to figure out protein folding.

Now, the actual sequence of amino acids in a polypeptide - what you see scrolling along

down there - is called its primary structure.

One amino acid covalently bonded to another, and that one to another, in a single file.

But some amino acids don't like to just hold hands with two others, they're a bit

more promiscuous than that.

The hydrogens on the main backbone of the amino acids like to sometimes form bonds on

the side (hydrogen bonds) to the oxygens on amino acids a few doors down.

When they do that, depending on the primary structure, they bend and fold and twist into

a chain of spirals, called a helix.

We also find several kinked strands laying parallel to one another, called pleated sheets.