to show you how to reset a circuit breaker. If you are laying around the house and the

lights go out for any reason the first thing you want to do is you want to get up and turn

the light switch back on and see if the light comes back on. If it doesn't however and there

are more than one light out in the room you probably have a tripped circuit breaker. So

what you want to do is you want to get up from the couch and you want to walk in the

other room where your breaker box is. They usually don't put these panels out in the

open. They want to put them in inconspicuous areas because they are not very pretty so

you will probably find them in a closet, a basement or a garage. So what you want to

do is you want to walk and find your breaker box which looks like this and you want to

go over to it and you want to open it up and it will actually have some breakers inside

like this. A lot of times they have the breaker labeled for what room it goes to over here

but what you can do is you can look at your breakers and go down the list until you find

one's that flipped in the off position and then what you will want to do is you'll want

to make sure it turns all the way off and then back on. Then you go back into the room

and you can turn the light switch on and hopefully your lights will work. If you need any other

help you can come see me at www.parkerhomerenovations.com