Name: Meshtastic 速成班 Part 3 - 快速入門教學！ (Meshtastic Crash Course Part 3 - Quick-Start Guide)
Uploaded: 2026-03-01T22:33:35.000Z
Duration: 8 min 22 s

未來進行式

Today, I'll be debunking a popular myth about meshtastic.

今天，我要來破解一個關於 meshtastic 的常見迷思。

And that myth is that it is difficult to get set up.

程度副詞

After watching this video, even non techie types are going to say, that was simple and we're going to do it all in under 10 minutes using a guide that I made called your first 10 minutes with meshtastic.

看完這支影片後，即使是非技術人員也會說，這太簡單了，而且我們將在 10 分鐘內完成，使用我製作的指南，叫做你的 meshtastic 前 10 分鐘。

Now, this lesson is one of many that exists inside of an overarching curriculum.

現在，這堂課是整體課程中眾多課程之一。

The curriculum doesn't just get you set up in 10 minutes.

這個課程不只讓你 10 分鐘內搞定設定。

It teaches you all the background information that you need to truly understand how to maximize meshtastic.

它會教你所有真正理解如何最大化 meshtastic 所需的背景資訊。

Now watch this video first, but if that interests you, after the video, go check it out.

現在先看這支影片，但如果那讓你感興趣，影片結束後，可以去看看。

It has handouts as quizzes, as structured lessons, videos and exercises.

它有講義、測驗、結構化的課程、影片和練習。

And best of all, it helps me feed my family.

而且最棒的是，它能幫助我養家餬口。

Today I'll be demonstrating with a Lilygo T Deck plus and a Lilygo T Echo.

今天我會用 Lilygo T Deck plus 和 Lilygo T Echo 來示範。

The truth is, these instructions are pretty much universal, so it doesn't matter what device you have.

說真的，這些說明幾乎適用於所有裝置，所以你用什麼裝置都沒關係。

There are some steps that might be a little different, but

this will apply no matter what device you have.

這都適用於你手上的任何裝置。

This is where you're going to take inventory of what you have and where we're going to start making decisions.

在這裡，你會清點你擁有的東西，並開始做決定。

In your box, you will most likely find a meshtastic note, an antenna, and a charging cable.

在你的盒子裡，你很可能會找到一張 meshtastic 筆記、一條天線和一條充電線。

但在做任何事之前，先停下來。

Do not attempt to power on your device without an antenna connected.

在連接天線之前，請勿嘗試開機。

If you try this, you could brick your device.

如果你這麼做，可能會損壞您的裝置。

Some devices don't even come with a external antenna, so you'll be fine in those situations.

有些裝置甚至沒有外接天線，所以那些情況下你沒問題。

But if your device does require you to screw an antenna on, please do not turn it on first.

但如果你的裝置需要你鎖上天線，請先不要開機。

Once your device has the antenna connected, you will power it on.

一旦你的裝置連接好天線，你就可以開機了。

Now, powering on your device might be pretty straightforward, but

if it doesn't turn on right away, try plugging it in with the cable that it came with.

如果它沒有馬上開機，試著用附帶的充電線插上電源。

Positive indications here would be that the screen turns on or that you see LED lights blinking.

這裡的正面跡象是螢幕會亮起，或者你會看到 LED 燈閃爍。

If you have a device that does not have a screen and keyboard, then you're going to need to interface with your device using the meshtastic app.

如果你的裝置沒有螢幕和鍵盤，你就需要透過 meshtastic 應用程式與裝置互動。

If you're on the App Store or the Google Play Store, you should find something that looks about like this.

如果你在 App Store 或 Google Play Store 上搜尋，應該會看到類似這樣的畫面。

Once you have the app downloaded, you can open it.

下載好應用程式後，就可以打開它了。

But before we do that, I want to tell you about another app.

不過，在我們開始之前，我想先跟你介紹另一個應用程式。

This video is proudly Sponsored by madgeear company Me.

本影片由 madgeear company Me 贊助播出。

Look, every family needs an emergency plan, but most people do not have one.

聽著，每個家庭都需要一份緊急計畫，但大多數人並沒有。

我們的應用程式 Ready Plan 解決了這個問題。

It's it guides you through the process of making your first emergency plan and helps you distribute it to your loved ones.

它會引導你完成製作第一份緊急計畫的過程，並協助你將計畫發送給親愛的家人。

If you've never made one before, that's perfectly fine.

如果你從來沒有做過，這完全沒關係。

這個應用程式就是為此設計的。

It takes less than 10 minutes to make your first emergency plan and share it with everyone in your family.

製作你的第一份緊急計畫並分享給所有家人，不到 10 分鐘就能完成。

I truly believe that you're gonna like it so much that I'll offer a full money back guarantee if you don't like it.

我真的相信你會非常喜歡它，如果你不喜歡，我會提供全額退款保證。

你其實是為了 meshtastic 而來的。

Now, the app might ask you for a few permissions.

現在，應用程式可能會要求你一些權限。

Bluetooth is essentially required because that's how you're going to be interfacing with your node.

藍牙基本上是必需的，因為那是你與你的節點互動的方式。

GPS is not necessarily required if that's not something that you intend to use your device for.

如果你無意使用你的裝置的 GPS 功能，那麼 GPS 並非絕對必要。

So before we move on to step four, let's do a quick recap.

所以在我們進入第四步之前，先快速回顧一下。

You have your device, you have the antenna installed, you have it powered on, and

你已經準備好你的裝置，安裝好天線，並且已經開機，

you now have the meshtastic app installed on your phone.

你的手機上已經安裝好 meshtastic 應用程式了。

For step four, we are going to connect your node to the app.

接下來是第四步，我們要來連接你的節點和應用程式。

For iPhone users, you're going to have something that looks about like this.

iPhone 使用者，你會看到類似這樣的畫面。

You'll click the connect button at the bottom, and

你會點擊底部的連接按鈕，然後

if your device is powered on and Bluetooth is working properly, you will see your device.

如果你的裝置已經開機，藍牙也正常運作，你就會看到你的裝置。

It just has a little bit of a different interface.

You'll click the button on the far right on the bottom and you will scan for your device.

你會點擊底部最右邊的按鈕，然後掃描你的裝置。

Your device might ask for a pairing code when you try to connect.

當你嘗試連接時，你的裝置可能會要求配對碼。

It's either the default 123456 or the PIN is going to show up on the screen of your device when you try to connect.

不是預設的 123456，就是你的裝置在嘗試連接時，螢幕上會顯示 PIN 碼。

You'll know the connection worked when you start to see things like your firmw version, your battery level, and

當你開始看到韌體版本、電池電量等資訊，

以及其他裝置資訊出現在你的手機上時，你就知道連線成功了。

Another thing to keep in mind is that if your device reboots during this process, that's typically pretty normal.

還有另一點要注意，如果你的裝置在這個過程中重新啟動，這通常是很正常的。

A lot of these setting changes that we're going to do will require a reboot of your device, and

我們要做的很多設定變更都會需要重新啟動你的裝置，

Moving on to step five, this is about basic setup.

接下來是第五步，這是關於基本設定。

So we're going to set your region and we are going to get you connected to the default channel.

所以我們會設定你的地區，並讓你連線到預設頻道。

Oh, and I almost forgot, you're going to set a name for your device as well.

喔，我差點忘了，你也要為你的裝置設定一個名稱。

If you're Working with a Lilygoat T deck, it's going to look something like this.

如果你使用的是 Lilygo T Deck，看起來就會像這樣。

Since most of my audience is in the US I'm going to be giving United States centric settings.

因為我的觀眾大多在美國，所以我會提供以美國為中心的設定。

Now, with that being said, for region, select us, and

接著，關於地區，請選擇美國，然後

for everybody else, select whatever region applies to you.

其他人則請選擇適合您的地區。

Now, pick a name that will stand out to you.

現在，請選擇一個您覺得很特別的名稱。

It doesn't have to be anything crazy, but

something unique that you could pick it out of a lineup.

After you apply these settings, your device will reboot, and that's completely normal.

套用這些設定後，您的裝置會重新啟動，這完全是正常的。

One thing to note before we move on to the next step is that you will be staying in the default communications channel.

在進入下一個步驟之前，有一點要提醒您，您會留在預設的通訊頻道。

So for this first 10 minutes of meshtastic, you will not be making your own channels.

所以，在 meshtastic 的最初這十分鐘，您不會建立自己的頻道。

But that is something that we can do later.

但這倒是我們之後可以做的事情。

But before we can even send a message on that default channel, we need to move on to step six, which is understanding your app layout.

不過，在我們能透過預設頻道傳送訊息之前，要先進行到第六步，也就是了解您的應用程式介面。

Now, the app will let you do a couple of things.

這個應用程式可以讓您做幾件事情。

The main one is message other mesh devices, but you can also configure the settings for your device.

最主要的就是傳送訊息給其他的 mesh 裝置，您也可以設定您裝置的參數。

You can look at a map of other devices in your area, and

您可以查看您所在區域其他裝置的地圖，並且

you can also manage connections with your device.

您也可以管理與您裝置的連線。

When you're on the messages screen, you're going to see a couple options.

當您在訊息畫面時，會看到幾個選項。

You're going to see channels and direct messages.

So you're connected to your device and you're inside of the app.

所以，您已經連上您的裝置，並且進入了應用程式。

Now you simply need to navigate to the place where you can actually send messages and select the primary channel.

現在您只需要前往可以實際傳送訊息的地方，然後選擇主要頻道。

This is going to be the place where you send your first tests.

這將是您傳送首次測試的地方。

You'll send your first test message very soon.

您很快就會傳送第一則測試訊息了。

What a perfect time to move on to step seven.

現在正是進行第七步驟的好時機。

Now, the only way this is going to truly work is if you have another device in your area or if you have two devices yourself.

這樣才能真正運作，您必須在附近有另一臺裝置，或者您自己有兩臺裝置。

So if you're watching this video and you haven't already purchased meshtastic nodes, I would recommend buying two to begin.

所以如果您正在看這支影片，但還沒購買 meshtastic node，我會建議您一開始就買兩個。

And the ones I like to point people towards first are the RAK Wisp Mesh tags.

我推薦大家優先考慮的是 RAK Wisp Mesh tags。

They're cheap, simple, durable, no nonsense.

它們便宜、簡單、耐用、實在。

字幕列表影片播放

Meshtastic 速成班 Part 3 - 快速入門教學！ (Meshtastic Crash Course Part 3 - Quick-Start Guide)

essentially

process

recap

demonstrate