Name: 如何在 yuzu 中修改大亂鬥終極版（無終極版修改管理器） [替代方法］ (How to Mod Smash Ultimate in yuzu (No Ultimate Mod Manager) [Alternative Method])
Uploaded: 2025-08-10T11:38:45.000Z
Duration: 10 min 44 s

Hello and I wanna quickly show you how you can get Smash Ultimate mods with Yuzu.

大家好，我想快速告訴大家如何用柚子獲得大亂鬥終極版的修改器。

And don't worry, it's not with Ultimate Mod Manager, I know it used to be good, but nowadays it does not work anymore.

別擔心，不是因為 Ultimate Mod Manager，我知道它以前很好，但現在已經不能用了。

So this is the updated version and huge props to this guy.

這就是更新版，為這傢伙點贊。

Thanks to this post I was able to do this and I'm just showing what this guy made possible for us.

多虧了這篇文章，我才能做到這一點，我只是想展示一下這傢伙為我們所做的一切。

Okay, good, we will start off easy, you can skip this part, in the description are timestamps.

好的，很好，我們先從簡單的開始，你可以跳過這部分，在描述中是時間戳。

And I will just quickly show you how to install Yuzu and how to go step by step for everyone that might have not had done this yet.

我將快速向大家展示如何安裝柚子，以及如何一步一步地為可能還沒有安裝過的人進行安裝。

Here you can just go to the download page and download it for the system you use, like Windows, Linux.

在這裡，你可以直接進入下載頁面，為你使用的系統（如 Windows、Linux）下載。

It won't work on Android and I also don't know if it will work on Linux, but I think it does.

它無法在 Android 上運行，我也不知道它是否能在 Linux 上運行，但我認為它可以。

Just install Yuzu, I will just bring the installer to the desktop.

只需安裝柚子，我就會把安裝程序帶到桌面上。

Here you could then install it and if you have done that, then there will be two things you will need to watch out.

在這裡，您可以安裝它，如果您已經安裝了，那麼有兩件事您需要注意。

The first thing, and a thing that I can recommend you, is when you install Yuzu and have this shortcut, it will always auto-update.

第一件事，也是我可以向你推薦的一件事，就是當你安裝 Yuzu 並擁有這個快捷方式時，它會一直自動更新。

But I don't like to auto-update, so when it has started, you can just pin this to your taskbar and this is without the update.

但我不喜歡自動更新，所以當它啟動後，你可以把它固定在任務欄上，這是不需要更新的。

Now, you will have a popup with prod keys and similar things.

現在，你會看到一個彈出窗口，裡面有 prod 鍵和類似的東西。

And for this, I and also the tutorial will definitely recommend that you have a modded switch, from that you can dump the keys and also the other files that you will need to have Yuzu running at all.

為此，我和教程都會推薦你使用修改過的交換機，這樣你就可以從交換機中轉存按鍵和其他文件，這些都是運行柚子所需的。

How that works, I won't show in this tutorial.

至於如何操作，我不會在本教程中展示。

You will need to find another tutorial, just search for Yuzu setup tutorial, I'm just going a little bit abroad here.

你需要找到另一個教程，只需搜索柚子設置教程，我在這裡只是出了一點遠門。

But yeah, if you have done that, then the next steps will be pretty easy.

但是，如果你做到了這一點，接下來的步驟就會變得非常簡單。

Just get your dumped Super Smash Bros. file and we can start.

只要拿到你的 "超級大亂鬥 "文件，我們就可以開始了。

First of all, you want to go on file, on the top here, and open your Yuzu folder.

首先，你要打開文件，在頂部打開柚子文件夾。

In here, you have the SDMC folder, that's your simulated SD card.

這裡有 SDMC 文件夾，也就是模擬 SD 卡。

Normally, on a modded switch, here you could have a folder to put in your mods.

通常，在修改過的開關上，您可以在這裡建立一個文件夾來存放您的修改程序。

Just follow my steps and it will work without a big problem.

只要按照我的步驟操作，就能順利完成。

We will start off with creating a new folder in here and call it ultimate.

首先，我們將在這裡創建一個新文件夾，並將其命名為終極文件夾。

In here, you create another folder called mods.

在這裡，你可以創建另一個名為 mods 的文件夾。

現在，我們已經完成了第一步。

Go back in the folders to the Yuzu folder.

And here comes a little bit tricky thing.

You want to go into the load folder and in case you are kind of blind in here, because there are very much similar things.

你要進入加載文件夾，以防你在這裡有點盲目，因為這裡有很多類似的東西。

For the game you want to mod, you see this part here with the numbers.

對於你要修改的遊戲，你會看到這部分數字。

You can either go here and open mod data allocation or you can look at these numbers and go into here and find them.

你可以在這裡打開模式數據分配，也可以查看這些數字，然後進入這裡找到它們。

Now that we have created the arc folder, you will need two things.

現在我們已經創建了弧文件夾，你需要兩樣東西。

First of all, you will need Skyline, link is in the description.

首先，您需要 Skyline，鏈接在說明中。

And also Acropolis, again, link is in the description.

還有雅典衛城，鏈接也在說明中。

Just open the assets here and take the newest release.zip.

只需打開這裡的資產，並獲取最新的 release.zip。

And if you have downloaded both, you can just, here you have your release and here you have your zip.

如果你同時下載了這兩份文件，你就可以在這裡找到發行版和壓縮版。

And as we use the second method here, you will just have to follow my steps.

我們這裡使用的是第二種方法，你只需按照我的步驟操作即可。

Go into Skyline, drag the folder out and put it in here.

進入 Skyline，拖出文件夾並放到這裡。

And now go to the release and just go into atmosphere, into contents, into those numbers and drag the roms file in here.

現在轉到發行版，進入 "氛圍"、"內容"、"這些數字"，然後把 roms 文件拖到這裡。

Now you could think you could already use mods, but we cannot yet.

現在，你可能認為自己已經可以使用修改器了，但我們還不能。

First of all, we will start Smash Bros without any mods, as we need to have Acropolis load first.

首先，我們將在不安裝任何修改器的情況下啟動大亂鬥，因為我們需要先加載衛城。

You just wait till Smash Bros is started.

If it's the first time loading with Acropolis, it can take some time, so don't worry.

如果是第一次加載 Acropolis，可能需要一些時間，所以不用擔心。

And the moment you hear the little jingle and see your thing, then don't worry, it worked.

當你聽到叮噹聲，看到你的東西時，別擔心，它起作用了。

Acropolis is in and we can click on emulation and stop.

衛城已進入，我們可以點擊仿真並停止。

We have done one of the two important steps to make this work now.

現在，我們已經完成了實現這一目標的兩個重要步驟之一。

The next step is go back to your user folder, go into SDMC and in here you will have in your ultimate folder now the Acropolis folder.

下一步是返回用戶文件夾，進入 SDMC，在終極文件夾中找到 Acropolis 文件夾。

That happened because of the mod we have made.

In there, go to config, to the numbers, they will probably be different, so don't worry.

在那裡，轉到配置，再轉到數字，它們可能會有所不同，所以不用擔心。

Again into the numbers and in here you will just pull that legacy discovery file.

再次輸入數字，然後在這裡調出傳統的發現文件。

Now I will show you how to install a mod.

It's very, very simple, but I will go for a difficult mod, as you will learn one basic thing with it.

它非常非常簡單，但我會選擇一個難度較高的模式，因為你將通過它學會一件基本的事情。

Not every mod will work, especially when it comes to stuff that changes stuff like movesets.

並不是每個修改器都能正常工作，尤其是涉及到更改動作集等內容時。

So be aware, you will need to watch out for steps and if a mod does not work, just look out for a next one.

所以請注意，你需要注意步驟，如果一個修改不起作用，就尋找下一個。

I just, for example, pulled this ascension mod out.

比如說，我剛剛把這個昇天模型拿了出來。

In here you see this mod has requirements, Skyline, we installed that, Smashline and NROhook.

在這裡，您可以看到此修改器需要 Skyline、Smashline 和 NROhook。

Smashline and NROhook are default requirements for moveset changing mods.

Smashline 和 NROhook 是更改動作集修改器的默認要求。

那麼，我們該把它們放在哪裡呢？

You just go back to your user folder and you just go back to the load E0Arch mod folder that we made.

你只需回到你的用戶文件夾，然後回到我們製作的載入 E0Arch mod 文件夾。

You will be able to find that by just clicking OpenModDataLocation2, so don't worry.

只要點擊 OpenModDataLocation2 就能找到，所以不用擔心。

Go into ARC and now we go into ROMFS Skyline Plugins and in here we can download those two dependencies that are needed for the mods, libNROhook and libMeshlineHook.

進入 ARC，然後進入 ROMFS Skyline Plugins，在這裡我們可以下載 mods 所需的兩個依賴項：libNROhook 和 libMeshlineHook。

I'm probably saying them wrong, so don't worry.

在這種情況下，把它們放進去就行了。

And those are the plugins that are needed, so the mods I will show will be able to run.

這些都是所需的插件，這樣我將展示的修改器才能運行。

Most mods won't need dependencies, but if, they will be mentioned.

大多數修改器都不需要依賴項，但如果需要，也會提及。

So just read properly and it won't be hard.

所以，只要好好閱讀，這並不難。

Now we can just download the TOTK moveset in this case.

在這種情況下，我們只需下載 TOTK 動作集即可。

And as you can see, if I go back to our user folder, into SDMC, Ultimates, Mods, I can just move it in here and one thing you need to make sure is, look into the folder.

正如你所看到的，如果我回到用戶文件夾，進入 SDMC、Ultimates、Mods，我就可以把它移到這裡。

If you see stuff like Fighters, Sounds, UI, similar, then this is right, this is correct.

如果你看到類似 "戰鬥機"、"聲音"、"用戶界面 "這樣的東西，那麼這就是對的，這就是正確的。

Sometimes there is an extra folder inside and you need to drag it out.

有時裡面會有一個額外的文件夾，你需要把它拖出來。

Now that it is in the folder, we can restart the user to make sure it works and start our Super Smash Bros.

現在它已經在文件夾中了，我們可以重啟用戶以確保它正常工作，然後啟動我們的《超級大亂鬥》。

With every new mod, it can take a little bit longer to load, but if it's loading for longer than like 5 or 10 minutes, I would recommend to look into your mods folder and take a look if one mod is maybe blocking another or something is maybe making it crash.

但如果加載時間超過 5 或 10 分鐘，我建議查看一下你的 mod 文件夾，看看是否有一個 mod 屏蔽了另一個 mod，或者有什麼東西導致了崩潰。

Just move mods in and out and find out which mod is making problems.

只需進出修改器，就能找出是哪個修改器造成了問題。

Maybe it's also a plugin, so just have a look out for that.

也許這也是一個插件，所以請留意一下。

In this case, both of those plugins work for us, that's good, making us able to play with custom movesets.

在這種情況下，這兩個插件都能為我們工作，這很好，使我們能夠玩自定義動作集。

And as you can see, if I press up B now, we see a custom animation played and also if I go under the map with Link, I can now warp through the map.

正如你所看到的，如果我現在按下向上 B 鍵，我們就會看到一段自定義動畫，而且如果我帶著林克走到地圖下面，我現在就可以在地圖上翹曲飛行了。

And also skins, I will again, in case some people are scared to do this, also show how to put in skins, but it's very simple.

另外，為了防止有些人害怕這樣做，我還會再次演示如何添加皮膚，但這非常簡單。

I have my skin mod folder in here that I pulled out before the tutorial.

這裡有我的皮膚修改文件夾，是我在教程開始前取出來的。

You will just again search for skins you like, find them.

您只需再次搜索您喜歡的皮膚，找到它們。

They have the similar folder structure, but in this case they have UI and also fighter.

它們的文件夾結構相似，但在這種情況下，它們有用戶界面，也有戰鬥機。