Name: Easy-Touch® Pro | 產品演示 | Cirris - 電纜和線束測試儀 (Easy-Touch® Pro | Product Demo | Cirris - Cable and Harness Testers)
Uploaded: 2024-12-09T07:58:42.000Z
Duration: 9 min 29 s

你好，我是 Cirrus 公司的託尼。

Today we're going to go over the EasyTouch Pro and we're going to do some basic setup and testing.

今天我們將介紹 EasyTouch Pro，並進行一些基本設置和測試。

It has Ethernet so you can connect it to your network.

它有以太網，是以可以連接到網絡。

It has four USB slots and it has the capability of connecting to Cirrus Server.

它有四個 USB 插槽，可以連接到 Cirrus Server。

Cirrus Server, you can have multiple EasyTouch testers using all of the same tests so you're not having to load each test on each machine.

使用 Cirrus Server，您可以讓多個 EasyTouch 測試儀使用相同的測試，這樣就不必在每臺機器上加載每個測試。

It has the capability of testing at 2000 volts DC.

它能在 2000 伏直流電壓下進行測試。

To plug it in, you plug the power cord into the back of the tester and then you push and hold this power button for at least one second to get the tester to power on.

插入時，先將電源線插入測試儀的背面，然後按住電源按鈕至少一秒鐘，測試儀就會啟動。

You have the capability to set up line workers, master login, test engineers.

您有能力設置生產線工人、主登錄人員和測試工程師。

Right now it's set to master login with no password because I haven't set up security yet.

現在，它被設置為無密碼主登錄，因為我還沒有設置安全性。

Just hit the OK button and it will boot you into the EasyWear software.

只需點擊 "確定 "按鈕，它就會引導你進入 EasyWear 軟件。

It gives you the capability to create tests within minutes using the learn function.

使用學習功能，您可以在幾分鐘內創建測試。

You can create your tests on your own, but why?

您可以自己創建測試，但為什麼呢？

它能為你完成所有繁重的工作。

It also has the capability of creating reports.

You can either print them, export them as PDF or CSV file formats.

您可以打印、導出為 PDF 或 CSV 文件格式。

The EasyTouch Pro has a touch screen so you don't need to use a keyboard or mouse.

EasyTouch Pro 具有觸摸屏，是以您無需使用鍵盤或滑鼠。

The way you connect your cable to the EasyTouch Pro is using the Cirrus adapter system.

將電纜連接到 EasyTouch Pro 的方法是使用 Cirrus 適配器系統。

You have a single high, which takes up 32 test points.

您有一個高點，佔 32 個測試點。

You have the double high, which takes up 64 test points.

And you have a quad board, which will take up 128 test points.

你有一塊四電路板，將佔用 128 個測試點。

The Cirrus adapter system comes in a wide variety of connectors.

Cirrus 適配器系統有多種連接器。

While you're setting up your test and you have a question on something on the screen that you need help with, you can touch that help button and at any time on any one of our screens in the lower right hand corner, there will be a help button that will tell you exactly what is on that screen with flyovers.

在設置測試時，如果您對螢幕上的某些內容有疑問，需要幫助，您可以輕觸幫助按鈕，在右下角的任何一個螢幕上，都會有一個幫助按鈕，它會告訴您該螢幕上的具體內容。

All you have to do is touch it and it will tell you about what it is.

你只需觸摸它，它就會告訴你這是什麼。

Now we're going to set up a test using a batch of these simple cables.

現在，我們將使用這些簡單的電纜進行一次測試。

To install a Cirrus adapter, we're going to first line it up, slide it in until you feel a little bit of tension.

安裝 Cirrus 適配器時，我們首先要將其對齊，然後滑入，直到感覺到一點張力。

Then you're going to seat the connector by adding pressure to the back of the connector.

然後在連接器背面加壓，使連接器就位。

If it's seated, the slide lock will easily slide in behind the adapter.

如果已就位，滑鎖就會很容易地滑入適配器後面。

To learn a cable, you're going to hit create test.

要學習電纜，您需要點擊 "創建測試"。

This is the maximum value of resistance you're going to allow for a wire connection.

這是導線連接所允許的最大電阻值。

The low voltage insulation resistance is used to determine if you have a short or a high resistance connection.

低壓絕緣電阻用於確定是短路還是高阻連接。

You want to set this high so you pick up a high resistance connection under 100k ohms.

您需要將其設置得較高，以便拾取低於 100k 歐姆的高阻抗連接。

We want to run a high voltage test, so we're going to leave high voltage testing on checked.

我們要進行高壓測試，所以要將高壓測試設置為 "已檢查"。

Since we're using high voltage, we'll go into the set high voltage parameters, show you what it looks like.

由於我們使用的是高壓，我們將進入設置高壓參數，向你展示它的樣子。

This is where you'll set up all of your high voltage.

您將在這裡設置所有高壓電源。

But at this time, we'll cover this in another video.

但現在，我們將在另一個視頻中介紹這一點。

During the learn, we have the option to check for capacitors, diodes, resistors, twisted pair, or we can learn four wire.

在學習過程中，我們可以選擇檢查電容器、二極管、電阻器、雙絞線，也可以學習四線制。

But at this time, we're not going to use them because the cable we have doesn't have any.

但目前我們不會使用它們，因為我們現有的電纜中沒有。

Okay, stored air details is typically checked by default.

好的，默認情況下通常會選中 "存儲的空氣詳細信息"。

Stored measured values I feel is important because it shows the resistance values that the test actually captured on your wire connections.

我認為存儲的測量值很重要，因為它顯示了測試在導線連接上實際捕捉到的電阻值。

So after you hit the learn function, it's going to automatically take you into the test editor.

是以，點擊學習功能後，它將自動帶你進入測試編輯器。

As you can see, it learned all of the wire defaults tab.

可以看到，它學習了所有的電線默認選項卡。

There's a couple options with the signature continuous and signature single test modes.

簽名連續測試模式和簽名單一測試模式有幾種選擇。

You'll see that the assembly attached is the default.

你會看到所附的程序集是默認的。

That means when you connect the cable, it will start testing.

也就是說，當您連接電纜時，它就會開始測試。

If you decide to choose the signature single test, which will do just one pass at the cable and not check for intermittence continuously, you'll see that the default test mode is start button is pressed.

如果您決定選擇標誌性的單次測試，即只對電纜進行一次測試，而不連續檢查間歇性，您會看到默認的測試模式是按下啟動按鈕。

It will check for the attach and tell you to attach a cable to test, but it's going to ask you to hit the start button instead of automatically starting the test.

它會檢查是否有連接，並告訴您連接電纜進行測試，但它會要求您按下啟動按鈕，而不是自動開始測試。

For this demo, we're going to choose the signature continuous test.

在本演示中，我們將選擇簽名連續測試。

So this is the best way to check for intermittence or problems like opens, bad solder joints, bad crimps.

是以，這是檢查間歇性或開路、焊點不良、壓接不良等問題的最佳方法。

Sometimes we can catch those type of errors with this test mode.

有時，我們可以通過這種測試模式捕捉到這類錯誤。

This will take you out back to the main screen where the test will be highlighted and you'll be able to now test that product.

這將帶您回到主螢幕，測試將突出顯示，您現在就可以測試該產品。

If you want to make a change to a test that you've already created, you'll highlight the test.

如果要更改已創建的測試，則會高亮顯示該測試。

It will load into the editor and then you can make any changes that you need to.

它將加載到編輯器中，然後你可以進行任何需要的修改。

You can change the test method, add a report, add barcodes or serial numbers.

您可以更改測試方法、添加報告、添加條碼或序列號。

Now that we have the test made, we're going to highlight the test if it's not already highlighted.

現在我們已經完成了測試，如果還沒有高亮顯示，我們就要高亮顯示該測試。

The tester will load the test program and tell you to attach the cable to start.

測試儀將加載測試程序，並提示您連接電纜開始測試。

With the continuous test mode, you're going to see that the tester automatically starts the test.

在連續測試模式下，測試儀會自動開始測試。

It's already through the low voltage test that fast.

它在測試中順利通過了高罐測試。

Now we're going to hit the test button so now we'll disconnect the cable.

現在我們要按下測試按鈕，斷開電纜連接。

As soon as we connect a new cable on, it'll start a new test.

一旦我們連接上新的電纜，它就會開始新的測試。

As you can see the test count down here, two good, zero bad.

您可以看到這裡的測試結果，兩好零壞。

Now that I've showed you how that we test the cable and you get good results, we're going to try to do an intermittent connection to show you what a continuous test looks like when it's not working right.

現在，我已經向大家展示瞭如何測試電纜並獲得良好結果，我們將嘗試進行間歇性連接，向大家展示當電纜工作不正常時，連續測試是什麼樣子的。

You'll see that it's still testing but it's not allowed you to go to high pot yet.

你會看到它仍在測試，但還不允許你去高壺。

If you were to disconnect this cable right now, you would have a bad cable showing that you had intermittence and the tester never went to high pot.

如果您現在斷開這根電纜，就會出現電纜故障，顯示為間歇性故障，而測試儀從未進入高電位狀態。

That is why it's saying test not complete is because we didn't do the high pot test.

這就是為什麼說檢測未完成是因為我們沒有進行高濃度測試。

If you have any questions, contact us with the information on the screen.

如果您有任何問題，請通過螢幕上的資訊聯繫我們。

So you can save them out on your network somewhere.

是以，你可以將它們保存在網絡的某個地方。

For this, we're going to use this batch of simple cables.

為此，我們將使用這批簡單的電纜。