Placeholder Image

字幕列表 影片播放

由 AI 自動生成
  • Here's how to connect your PS four controller In this video, we'll go over how to connect your controller to the PS four console and troubleshoot some common issues.

    下面是如何連接你的PS四控制器 在這個視頻中,我們將介紹如何將你的控制器連接到PS四控制檯,並排除一些常見的問題。

  • Used a clickable sections below to skip to a specific step.

    使用了下面可點擊的部分,跳轉到特定的步驟。

  • Goodyear Controller.

    固特異控制器。

  • Initially connected is a simple process with your council turned on plug in the provided micro USB cable and connect the other end to your controller.

    初始連接是一個簡單的過程,您的委員會打開插入提供的微型USB電纜,並將另一端連接到您的控制器。

  • Press the PS button on the center of the controller.

    按控制器中央的PS鍵。

  • Once the light on the back of the controller turns on, the device is connected.

    一旦控制器背面的燈亮起,設備就會被連接。

  • You can disconnect the cable to continue playing wirelessly or keep it plugged in to charge.

    你可以拔掉數據線繼續無線播放,也可以一直插著充電。

  • If you're having issues connect, your controller hears a few methods to try.

    如果你有問題連接,你的控制器聽到幾個方法來嘗試。

  • First, the controller may not have enough Barry to connect and stay on plug in via USB to the console.

    首先,控制器可能沒有足夠的巴里通過USB連接和保持插在控制檯。

  • Believe it alone for 30 to 60 minutes to allow it Time to charge.

    相信它單獨30到60分鐘,讓它時間充電。

  • After waiting for a bit, try pressing the PS button and see if to control our backlight turns on.

    等了一會,試著按一下PS鍵,看看是否控制我們的背光燈打開。

  • If so, you can then disconnect the USB.

    如果是這樣,你就可以斷開USB的連接。

  • If you're still having issues, you'll need to reset the controller first.

    如果你仍然有問題,你需要先重置控制器。

  • Power off your PS four entirely.

    完全關閉你的PS4電源。

  • Rather than using rest mode, flip your controller and look next to the L two button for a small hole that contains the reset button, take a thin paper clip and press into the slot for about five seconds, then let go with the console still off, plug into controller into the USB slot, then turned the PS four on.

    不使用休息模式,翻轉控制器,看L二鍵旁邊有一個小孔,裡面有復位按鈕,拿一個薄薄的回形針按進插槽大約五秒鐘,然後在遊戲機還未關閉的情況下鬆手,將控制器插入USB插槽,然後打開PS四。

  • Once the PS four is on, try pressing the PS button again to start the pairing process.

    PS四開後,再試著按PS鍵開始配對過程。

  • If successful, the backlight will turn on.

    如果成功的話,背光燈就會打開。

  • With these steps, you should be able to use your controller wirelessly with ease.

    通過這些步驟,您應該能夠輕鬆地使用無線控制器。

  • If you have any further issues, your council or controller may need hardware.

    如果您有任何進一步的問題,您的理事會或控制器可能需要硬件。

  • Technical support from Sony.

    來自索尼的技術支持。

Here's how to connect your PS four controller In this video, we'll go over how to connect your controller to the PS four console and troubleshoot some common issues.

下面是如何連接你的PS四控制器 在這個視頻中,我們將介紹如何將你的控制器連接到PS四控制檯,並排除一些常見的問題。

字幕與單字
由 AI 自動生成

單字即點即查 點擊單字可以查詢單字解釋