If so, join the club.

And if not, now all the wildest dreams you've never had are coming true with the world's

first foldable phone you can actually buy.

It's called the FlexPai from a company called Royole.

It's literally the first phone with a foldable screen that's commercially available.

Yeah, Samsung did have one once upon a time, but they still haven't gotten around to actually

releasing the Galaxy Fold yet.

So I'll believe it when I see it and can actually buy one.

Inside the box is whatever this is.

And here is the FlexPai with some instructions on how to fold and unfold the phone written

on the outer covering.

Honestly, I think it looks pretty cool.

It feels solid and heavy.

I held one of these for the first time at CES this year.

But obviously, since that was a demo unit and not my own personal device, I wasn't going

to try to see what happens when it's bent both directions.

Today though, this one here is all mine, and there's no one here to stop us.

Let's get started.

[Intro]

Right out of the box there are some confidence diminishing instructions that flash across

the screen, like 'only charge the phone with the device unfolded.'

And then look here at this massive list of instructions: don't drop it, keep the surface

dry and clean, please avoid sharp or pointed objects....uh huh, got it, sure thing.

And right below that, it keeps going on to say no screen protectors are allowed, and

the phone can't be opened if the temperature is below freezing.

It also looks like the side of the phone is super magnetic.

This is going to be fun.

Opening and closing the phone automatically changes how the apps are displayed on the

screen.

Magnets are the thing that holds the phone shut in the closed position with a very satisfyingly

hard click.

The magnets will definitely keep the phone from flopping open on its own.

The hinge of the phone here in the center is covered with a very dark blue rubberish

material and held in place by a series of hex screws.

It takes up a good portion of the back panel real estate.

It looks like one of those wrinkly dogs, or even a slinky that can be bent back and forth.

Good luck slapping a dbrand skin on this one.

When it does snap closed, it leaves just enough room inside for a pencil to clip into the

gap between the back halves.

Might be a perfect spot for a future stylus...just saying.

The two back panels have a subtle shimmer that we see on most smartphones these days

- low key, and it doesn't really draw attention to itself...well, besides the fact that it

folds in half.

That's a minor detail of course.

You can see how reflective and shiny the screen is as well.

The scratch test is going to be super interesting.

The weird thing to me though is that the screen is always going to be exposed on the outside

of the phone – always.

The whole thing is just there...vulnerable.

The whole system functions like an Android tablet, but then has the ability to fold closed

to be the size of a phone.

It also has memory enough to remember which app was open on which side of the phone each

time you flip it around.

It also has a little center options bar in the fold of the phone.

Honestly, it looks pretty slick.

Yeah, the thing is a bit thick, but if it's durable, I could totally see myself using

one of these.

Trying to think of logical reasons of why I would actually ever need a foldable phone

though.

It would probably mostly be just watching movies and YouTube since, you know, I spend

a lot of time on YouTube.

This Flexi-boy can watch videos in full screen mode while the phone is folded.

And it can also watch full screen videos in the unfolded mode.

Honestly, pretty darn cool.

A company called Asurion did a study one time and found that people check their phones on

average about 80 times a day.

And judging by the amount of people I see texting and driving, I believe that number.

Royole says on their website that this phone is good for over 200,000 folds.

So if we're unfolding this FlexPai 80 times a day, under perfect conditions of course,

this phone would last almost 7 whole years.

That's pretty fantastic considering that the Galaxy fold lasted about 7 whole days.

Remember this thing is available to buy right now for a cool $1,300 dollars.

Let's see what we get for that.

Inside the box we get a SIM card removal tool and a microfiber cloth, some USB-C braided

headphones, and a USB-C power cable, and a branded power brick.

There's no case or screen protectors inside the box.

That's interesting.

Now that we know everything is working properly, let's start with the scratch test.

Knowing what we know about the laws of physics, it's pretty safe to say that the screen is

not going to be made from glass, since glass is glass and glass does not bend.

The surface of the FlexPai has to be made from a flexible optically clear plastic.

The hardness level of that plastic though is up for debate.

In this particular case we see that the level 2 pick leaves no marks on the screen.

But the level 3 pick, as it's applied to the surface of the flattened phone, starts leaving

indented grooves all along the whole surface of the display.

This is why there were warnings when I first turned on the phone.

The FlexPai gets permanently damaged at a very soft Mohs level 3.

This is the main reason having a screen on the outside of the fold is a bad idea.

When it's in your pocket, both sides of the screen are rubbing up against the sides of

your pocket.

And again, when it's folded on a table, one screen side will always be touching something

hard.

There is no safe zone.

Watch as my fingernail can also damage the screen permanently.

This thing is going to get pretty wrecked with every day use – especially since screen

protectors are not allowed.

Samsung's implementation of having the screen fold up inside the phone is hypothetically

the better of the two methods since the closed fold protects the plastic screen.

But, you know, their phone also only lasted a week.

So you win some, and you lose some.

Checking out the top of the FlexPai, moving from the plastic layer up to the top panel,

there's a definite ridge.

And that panel is made from glass.

My razor is doing no damage to the surface of that at least.

The internal magnet is also pulling my razor all over the place.

Even holding up my pry tool with its own magical magnetic strength.

It's super strong.

Probably because that hinge won't let the phone stay closed without it.

A little trick I learned from Marquez with this magnet paper.

We can see the large rectangular magnet right dead center inside the glass panel.

We can also see the two bottom loud speakers in the center of each half.

And over there in the bottom corner is the vibration motor, also made from magnets.

There's another large rectangular magnet on the other side of the phone that will keep

things shut.

Pretty darn cool.

We'll take a look at the insides of the FlexPai during the teardown...you know, if it survives

the rest of this durability test.

There is a dual tone LED flash alongside the dual camera lenses.

A 16 megapixel normal camera is paired up with a 20 megapixel telephoto camera.

No complaints here.

Having multiple cameras that offer different perspectives is really the way to go.

That's one of the things I'm looking forward to when I finally upgrade my personal Galaxy

S8 Plus.

With so many sides to analyze, this might take a minute.

The bottom right quadrant has a loudspeaker grill.

The bottom has the power button, volume up button, fingerprint scanner, and the volume

down button, in that exact order.

The fingerprint scanner chilling here in the middle is in a weird spot, but I'm not judging.

Even after scratching up the surface of the scanner, it was still able to read and recognize

my fingerprint nearly every single time.

The bottom left quadrant has a whole lot of nothing...except more metal.

The hinge portion is where things start to get interesting, and we'll talk more about

this in a second.

But Royole has literally trademarked the name Cicada Wing as the name for this thing.

True story: a cicada is a super gross bug, and I have no idea why in the world they would

choose that to brand their phone with.

I give Apple a hard time about a lot of things, but at least they don't name their phone parts

after bugs.

The rubber portion has little air pockets in it to allow the flexing between the hinge

segments.

The rubber wrinkles sit over the little voids in the hinge...kind of like when Grandma pulls

your cheek.

It's all kinds of squishy.

The top left quadrant has more metal, along with a USB-C charging port and a SIM card

tray.

It's really nice of Royole to include an SD card slot.

Adding movies and media to the large screen will be super easy.

The top of the phone has more metal and a few plastic antenna lines.

Honestly, the more I see, the more I like.

It's a really super fun phone.

Checking the back panels where we would normally see glass, this Flexi-boy has large plastic

rectangles.

The phone is heavy enough that initially I thought the panels were made of glass, but

it is not.

My razor blade's making short work of the surface which is actually really good news

for us because now I get to tell you more about this vial little cicada bug that Royole

is so proudly naming their phone after.

No, I don't care about most bugs...they don't bother me, I don't bother them.

But cicadas are in a realm all of their own.

These cousins of crickets swarm out of ground every 13 years.

Then they shed their crunchy potato chip skin like a snake, grow wings on either side of

their body, and then cicadas make an incredibly loud incessant noise by vibrating membranes

on their abdomen.

[Cicada sounds] That's more annoying than any sound I've ever made.

Then the cicadas go lay their eggs in tree branches, which kills the branch, making it

fall to the ground where the baby bugs can crawl out into the ground and wait for another

13 years before they can pop out and start the whole process all over again.

This is a true story.

The cicada wings are slightly separated from one another like the folds of this phone,

so I can kind of see why they're named after each other.

But still...gross.

The bug should be burned.

Nailed that transition.

The 7.8 inch 1920 x 1440 flexible display lasted about 5 seconds under the heat from

my flame.

The screen is so thin there's no insulating layer over the pixels to absorb the heat like

we see on glass phones.

The flame directly burns the pixels, literally destroying them to the point of no return

in 5 seconds.

Makes me wonder if impacts or pressure points might do the same to individual pixels, especially

since if the folded phone accidentally drops, no matter how it falls, it's going to hit

the screen area.

It'll be interesting to see how this phone progresses into the wild as more people own

it.

Now it's time for the bend test.

When bending from the front, we get a nice uniform fold along the center of the device,

with a satisfying click at the end as the magnets latch together.

The screen still rotates to face whatever side is active at the moment.

Opening the phone up, we see no permanent kinks or cracks in the frame, thankfully,

or this would be pretty awkward since that's the way the phone's supposed to bend.

Alright, here's a few more times now, and you know, just from the front because I'm

kind of legit nervous and I feel pretty bad about what might happen next.

I've been curious if a tight pants pocket might be able to collapse or crush the folded

phone since it has the large gap in the frame.

It's kind of just asking for trouble.

With a full palm grip and 100% effort trying to crush the phone single handedly – nothing

happens.

The hinge is intact and the phone is still totally operational.

The hardware is going to be uncrushable by the pocket of your skinny jeans.

My fingers do not hurt the pixels either, so I'm glad for that.

But what happens if the phone is laid flat and grandma sits on it?

Well, to be honest, it actually flexes quite a bit in the wrong direction with no damage.

Going from the flat 180 degrees all the way to a 270 degree three-quarter circle before

the hinge finally snapped in half, breaking at two points.