Name: 4.有事不對頭｜乾式熟牛肉機 (4. Something Is Wrong | The Dry Aged-Beef Machine)
Uploaded: 2021-01-14T09:59:22.000Z
Duration: 8 min 32 s
Description: 【看影片學英語】數萬部 YouTube 影片，搭配英漢字典即點即查，輕鬆掌握單字發音與用法，長久累積看電影不必再看字幕。

So today I want to give you a quick update on what's happening inside my own fridge

I will also take advantage of this video to share along a few priceless and useful tips I learned the hard way.

Just a few days after I set everything up I had to make a few modifications to the system in order to to more it more practical and more efficient.

The fan inside was running on an external USB battery because I wanted maximum insulation.

The problem, it couldn't last longer than a day, so every now and then, the fan would stop.

Then I would have to go and change the battery.

I am now using a USB wall charger and it's taped on the side of my fridge.

Collateral damage, I had to cut a notch in the seal of the fridge door which I think is not a big deal for the sake of science.

In terms of temperature, dry aging beef should be done between 0˚C and 4˚C.

Higher, not like 5˚C, but more like 10˚C, means that there is a strong risk of product spoilage.

But then the lower temperature isn't that good as well.

If the meat is frozen, the dry aging process just stops.

Problem, 2˚C is almost impossible to reach with a domestic fridge.

Kinda of a solution I guess, I turned my fridge to its maximum cold setting.

The side effect is that I get some really cold spot like in the very bottom of my fridge

meaning that my sourdough really struggled to proof and my fruits are frozen.

But for the sake of science, again, I think it's fine.

Because I really needed to check on the meat regularly and because I had to film it

the door was very often left open, which, problem, is nothing but bad for temperature stability.

Solution, every time I would do so, I would also add a few ice packs in there just to cool it down more rapidly.

It works great, but side effects, it also concentrate all the moisture through condensation.

When you start something new, I guess always have to overcome challenges along the way and it's part of the reason I really enjoy this.

I'm glad we solved the first three problems because, trust me, those are nothing but appetizer regarding the next one.

Once I did those modification, everything was running smoothly for a few days, but at some point I noticed a slight increase in humidity.

Humidity, when you are dry aging, should stay somewhere between 80-85%.

On a scale going from 0%, where it is really, really, dry cake; to 100%, it's like the jungle.

The thing is, if you go higher than 85%, there is a risk of spoiling the meat.

And if you go lower, there is not a big risk, but you might end up losing too much meat at the end when you are going to trim your cut.

So I check the meat, it doesn't smell bad, it doesn't look bad, however it's not going the right way and I can feel it.

First I am plugging the ventilation holes.

Maybe with air circulating between the fridge and the machine I am trying to dry out the whole fridge which could rise up the humidity

Now I'm thinking the holes might be too small on the top of my box, so maybe the system doesn't get enough air flow.

I had another idea, I found a way to increase the airflow to make it more powerful.

And even weirder, if I were to stop the fan, humidity would go back to 80%.

So I thought maybe I should leave the fan off.

For many reasons that sounds wrong, so I texted my dear butcher.

I know I gotta do something and I gotta do something quick because basically this is a time bomb.

And the thing is I don't know where to start.

Okay, I say we give the box a thorough clean, maybe it will just help us out.

I removed the drippings collector, the paper towel was dry and clean.

Then I touched those f[bleep]ing silica gel packets and there it is.

They were soaking wet, like literally, there was a puddle of water underneath.

I got them out, closed the door, and put the fan back on and the humidity dropped to 70% in a matter of minutes.

So I guess we are safe now, let's just understand what the f[bleep] happened.

Silica gel is a desiccant meaning that it absorbs all the humidity from the air around it.

The thing is that it's not magical because once it gets saturated with water, it behaves like a wet sponge.

Knowing that meat is approximately 80% water, that makes it 1.7 kilograms of water to get rid of.

Luckily for us, we only have to dry out the outer layers which transform into a waterproof barrier after some time.

Let's say we need to dry out a 1 cm thick layer on each side on a 10 cm thick ribeye.

That's 20%, so that's 340 grams of water.

So I used 200 grams of silica gel packets in the first place which can only adsorb 35% of its weight in water.

Basically, with the first set up, we were able to adsorb 70 grams of water.

Which is slightly off considering we needed 340 grams.

It's not a big deal, I went back online and ordered a kilo of desiccant which is exactly what we need and I placed it in the fridge.

With that new set up, humidity has dropped drastically.

Yes, to be honest, a bit too much as we are now at 40% humidity.

I'm gonna leave it like this just to counteract the initial mistake.

But afterwards I'm getting rid of those is not a bad thing because they also produce an exothermic reaction.

Meaning that as they adsorb water there is a slight amount of heat happening in my box.

So I don't see why there would be any problems from now on.

If you liked this food adventure then please give it a like, thumbs up and share that over your social media.

You know, instagram; facebook; twitter; pinterest, why not.

Also people click subscribe because I made new videos every week and it's always, always about food.

It can be recipe, it can be a vlog, it can an experiment, or it can be a DIY like this one.