So I appreciate your patience and waiting for this review, but here we have the premium bend I H D U C G parts route to do so.

This is a premium Bandai advance of Zeta.

Part said.

Here it is.

Its own thing the D parts for to do is its own kind of flyer thing.

But of course it's.

I think most people are gonna be buying this as an add on set to their advances.

80 kids like namely the Hazel custom or other versions of the Hazel.

So you're gonna be using this as an add on for that, and there's different combinations that you can do.

If you have two of them, you conform them into, ah, the dual combination of them.

Or you can make different forms of Hazel.

Like I said, different forms of the shields and things using parts we have included with this, So we'll go over as much of that as I can here in the review, because I do have other kids to use with that.

But as for what you get in the box, it's pretty simple.

Essentially, what you're seeing here is pretty much all that you get.

You do also get a set of waterside cows and a handful of connection pieces that you're gonna be using for some of the other different combinations things that you're going to use this for and I'll show you that stuff here in a moment.

But as it is, this is pretty much did.

The color separation is really nice.

The articulation of you know what is.

Basically it is not really a hold of articulation really necessary for what it is, but it is there anyway, so we'll go over that.

The details are nice as well.

It comes with stand, obviously kind of pretty.

You kind of need that.

It is also available in the combat deployment colors, which I also have one of here, so I can show you that now.

There is no difference in the actual kit between the combat deployment colors.

Obviously, just the colors difference.

The water sides are also totally, exactly the same.

The only difference is going to be in the manual.

The manual for them shows you how to build different forms of them, so we'll go over that and we'll show you what's included in the manuals for the instructions there.

But as always, guys, a huge thing gets us a gun store for making the review possible.

If you are interested in any people and I stuff like this or anything, they're on their site.

You can save 10% off everything they're using the coupon code.

Zach Earliest 10.

So check the link to their site in the coupon code down there in the video description.

Now let's get into this little import loom a little more detail.

It's like I said, Here is the waterside decal sheet, which is going to be the same for both of the kids.

Whichever version you get the water.

Sadiq el.

She is exactly the same.

You just have a few of the Omega logos there in white and black titans test team logos, four of those in white and then the cool twin rabbit logo.

That kind of pie ces rabbit logo.

There in a couple, you know, also white and black.

The main logo there is in, of course, just white.

It's all just a colored local, but the text the top and bottom of that is in white and the Black Sea able to use that either color version, which every end up using with that for and then this six different connector pieces that you have included here for this, that you can use four different versions they were gonna make with it.

As for the manual, it's pretty funny how basically like half the manual is construction, and the other half of the manual is all just going over how to make some different variations.

So this is just the regular G parts for to do the white version of this in here we have the instructions for how to make the hooded Ooh, dual combination forms that be, if you have two of them, goes over how to make that and then also goes over how to make the Hazel Ross.

It'll show you how to make that, which is combining a hazel custom with just the parts included here as well.

And then over here.

It also shows you how to make the long blade rifle by combining the parts included with this of the long lead rifle with the hazel customs or other version of the hazel.

Also include this just the regular standard hazel beam rifle there used that, along with parts here.

Include with this to make the long blade rifle.

So that is it for what it included in the regular Heard Emmanuel.

As for the Combat Deployment Colors version of the manual here, it's got all the construction, and then it does also here show you how to make the Rue Du Dual combination form socially.

That as well that is the same.

But after that it's different here instead of just the hazel rah, this will show us how to make the Hazel Ross second form.

So what?

This you need the hazel, the advanced hazel as well as to of the herd news.

They'll need two of those to put the parts in the back as well as parts of the side is so making that.

So it's just like with the MG that they did the instruction manuals for the masquerade versions of this the same way on.

Then, over here we do also have will show you how thio make the shield boosters.

You're using the part from this and to shield boosters you can use to make the Super Shield booster there and then at once again, instructions on making the long blade rifle there as well.

So let's go ahead and start from the getting making the dual form first.

All right, here it is in the dual combination form.

It's relatively simple.

You just kind of mix and match the parts around of two of them together, and you get this really cool looking for and I will say I as much as the herd into its original form and the now in the dual combination form.

It's pretty much just a big mash of Parsons mashed together and doesn't really make a whole lot of sense.

But I will say about both forms, as isn't it?

I do like them assed Muchas.

They're just a big mash up of just random parts.

Basically, they do look really cool.

Somehow they managed to look like some pretty cool mash ups of parts.

I know that could just be by.

It's just because I'm just in love with advances.

Ada designs in general, I think, just aesthetically they're very pleasing my personal taste.

But yeah, as messy as they are, they do still look pretty cool.

But like I said before, I am still thinking that probably not a lot of people are going to ultimately want to make and display this form of the You guys are probably gonna want to buy these parts to combine them with the hazel.

So we're gonna take a look at that after one thing that I did forget to do one thing for us.

I should also mention that you can also take your beam effect apart from your HD hazel kit and stick this into here into the front of their for the beam saber that it's got there.

The front.

So it's not include with this get unfortunately, but you can take pretty much any beams ever effect part but space specifically the smaller size one, like the ones that you use for the hazel kit as an added bit onto there.

So what I meant to go over before that I missed was just talking about the articulation that this thing has.

It's not really gonna be too much because it's just kind of meant to just fly along as it is.

But of course, each of these side bits can be moved up and down like that.

These parts on the front of here aren't attached by much.

It's just basically kind of fitting into there a little bit, so they're not really super strongly attached into their system.

You will be careful about that, touching them the wrong way.

They're gonna fall out pretty easily.

You can also rotate these bits, but it's not exactly a rotating peg.

It's actually a hexagonal peg, so it's kind of you could rotate it, but eventually it's just gonna kind of wear down this pig.

So it's better to just pull that off and then reattach it a different way if you wanted at a different angle.

But it's not really going to be for any purpose is just kind of meant to be straight like that.

But you could change the English.

Suppose right here on the back.

That's where this is going to plug into the action based.

We have this adapter there for that.

The display goes straight into there.

So, of course, with this type of action based, you could change the angle of that little bit up and down, up or down.

I should say, if you wanted to, but it doesn't really give you a whole lot of range movement for that's basically just kind of meant to view post down there.

So it's just flying straight ahead.

But you do have some nice color separation, of course, with the yellow bits inside there and then over here on the other side, you have a couple of yellow bits there.

That's all, actually yellow pieces.

There's no foil stickers for this.

It'll also the claw side, as you just saw momentarily ago on the dual combination formed.

This does slide out like that.

And then this part opens up like that for the ClA bit, which will see more again here in a little bit.

But for now, All right, let's move on with making the hazel rah first thing in order to make the hazel rah for hazel custom here, you need to omit the red piece there for the cockpit hatch.

Or either just omit it during the construction or take it out later on.

Sees enough to take out.

So you need to remove that so that you can put this new part on here for the front of the chest.

All right, so here he is, and it is very awesome.

I got to say the nice thing about the H G is that it's a lot less feels a lot less cumbersome thing.

HD, obviously with HD are dealing with a much larger Parsons is heavier, and it's just kind of a little bit harder.

Thio work with thing with HD, and everything is nice and small, simple, so very light.

Easy to work with.

The weight issue is not as big of a problem with this now.

Of course, the way that the action based connects onto the back of the crew do there is a bit weird.

It's gonna be kind of may be hard to get it into up on a action base in some really super Did Emmett pose.

It's still actually resting its feet on the base there.

Even I'm trying to go for a sort of flying pose.

It's not actually completely suspended up in the air, I think what you could definitely do, of course, is to make your own action based adapter or my action based plug in point again just by taking a three millimeter drill, just drilling into up into the crotch there as the normal and just plug in action based up into their But this thing is going to be, of course, very back heavy now, with the hoodoo basically attached onto the hazel customs backpack there, up on top of there.

Also, the long gray blade rifle looks awesome, but it's a little bit tricky to get it to hold it, because the back end of that is also very long.

So getting that tucked up underneath the arm, the wrist is just not made to hold a rifle that is, or any kind of bazooka or anything that's long and talk to Bernie the arm, so the risk is kind of just barely hanging on there.

It's not really meant to be at such an angle like that, but it's holding on there well enough at the moment.

Also, the her to do parts that attach fall into the beam rifle feel a little bit loose.

It's not really that big on issue, but they just don't hold on to the rifle as firmly as everything else.

In this case, just a small thing.

We just want to point that out to you guys, so maybe just be prepared to glue those parts later on.

Once you get her onto painting or attaching this parts if you want them attached on there permanently.

But for now, let's move on to the Hazel Ross second foreman.

For that, we're going to need the advanced hazel H.

G.

And to reduce, So let's get it first.

Couple more interesting points about this in the manual.

It actually says to use the hazel custom for this, but you clearly need the head and feet parts of the advanced hazel.

So anyway, you also have to admit the front articulated sub arms on the front skirt.

There.

Take those off.

Enter one's gonna remove the cockpit piece there for attaching on the parts here onto the front, and then the advanced hazel actually uses a different part Europe for the backpack.

But you do have the extra parts to make this part of the backpack that you need to make sure you keep those extra parts so you can make this part, which you need for making this combination.

Otherwise, you'll have to take that off of the hazel custom and put it on here won't match the color of straight of the box.

We can always paint it, of course, but just make sure you use thes parts here.

And one more thing here.

One more thing here.

There's a step where you have to take off the ammo from the side skirt of the hazel custom or advanced hazel.

And then you're supposed to stick it onto here onto the through two parts that's supposed to just go on to here like that and stay on, but it falls off very easily.

So you're definitely gonna have to glue this part in later on our stick, some sticky tack or something in there, some way to make that stick in there for the time being.

I'm just not gonna plug it on there because I don't feel like gluing it at the moment.

And so I was gonna go without that much.

Now that is meant to be plugged onto their All right.

So the Hazel Ross second form here with the double steal booster there and the long blade rifle all in tow.

This thing is a massive beast.

We've seen this already in mastered a form and, like it said, the thing was just so super cumbersome match grade form in a in a high grade form.

Here it's a lot more manageable.

Of course, it's going to be a lot cheaper.

Easier on your wallet if you wanted to make this in high grade form as well.

But either way, I'm not saying anything bad about the match reform because it's pretty awesome in its own sense as well.