This video will cover three methods of connecting your controller.

本視頻將介紹連接控制器的三種方法。

If you're interested.

如果你有興趣。

Usar clickable sections below To skip to the method you want to use.

使用下面可點擊的部分來跳轉到你要使用的方法。

Connecting your Xbox controller toe Windows 10 via USB is a simple process.

通過USB連接Xbox控制器到Windows 10是一個簡單的過程。

With your controller in hand, take a micro USB cable and plug it into the top of the controller and plug the other end into your PC.

手持控制器，拿一根微型USB線插入控制器頂部，另一端插入電腦。

A message will appear on your desktop to confirm the device is ready to use.

桌面上會出現一條資訊，確認設備可以使用。

You can also connect to your PC using Bluetooth.

你也可以使用藍牙連接到你的電腦。

Open up the windows setting page, then navigate to search type Bluetooth and select Bluetooth and other device settings.

打開windows設置頁面，然後導航到搜索類型藍牙，選擇藍牙和其他設備設置。

On this page, make sure your PC s Bluetooth is switched on.

在這一頁，請確認您的電腦藍牙已打開。

Take your controller and hold down the bind and Xbox buttons for a few seconds until the light starts flashing back on the Bluetooth settings.

拿起你的控制器，按住綁定和Xbox按鈕幾秒鐘，直到燈開始閃爍回藍牙設置。

Click.

點擊。

Add Bluetooth or other device, then select Bluetooth device on the list of devices you should see Xbox Wireless controller.

添加藍牙或其他設備，然後選擇藍牙設備的設備列表，你應該看到Xbox無線控制器。

Click that option and your Xbox controller is now all set and connected with the Xbox Wireless adapter for Windows 10.

點擊該選項，您的Xbox控制器現在已經全部設置好，並與Windows 10的Xbox無線適配器連接。

You can connect your controller without a constant wired or Bluetooth connection.

您可以連接您的控制器，而無需持續的有線或藍牙連接。

I take the adapter and plug it into your Windows 10 PC on the PCs Devices page.

我拿著適配器，在電腦設備頁面上把它插入你的Windows 10電腦。

You'll see the adapter appear once it finishes installing itself.

一旦適配器完成安裝，你就會看到它出現。

Now turn on your controller with the center Xbox button.

現在用Xbox中央的按鈕打開你的控制器。

When the light starts flashing, rotated and hold the bind button for a few seconds on the adapter.

當指示燈開始閃爍時，旋轉並按住適配器上的綁定按鈕幾秒鐘。

Pressing.

按。

Hold its bind button for several seconds until you see a small flashing light.

按住它的綁定按鈕幾秒鐘，直到你看到一個小燈閃爍。

Theodore Apter controller should have both lights flashing rapidly is a search.

Theodore Apter控制器應該有兩個燈快速閃爍是一個搜索。

Once the flashing stops, the connection should be established and your controller is now set to run on your Windows 10 pc.

一旦閃爍停止，連接就會建立，您的控制器現在已經設置為在Windows 10電腦上運行。