But why is this?

Well here?

I have an identical bottle with a pressure gauge fitted to it.

And I want you to make a prediction right here.

If I shake up this bottle, will the pressure increase decrease or remain the same?

While you're thinking about that?

Let me tell you, this video is sponsored by squarespace, the all in one platform for building your online presence more about square space at the end of the show.

Okay.

I hope you have made your prediction and registered it in the pole up here.

This bottle has been sitting stationary for a few days at room temperature.

You can see the pressure reading is about three atmospheres.

330 killer Paschal's.

And I'm going to shake it up and see what happens.

Ready in 321 And the pressure is still the same.

You might suspect that.

Well, maybe this bottle is a lot of gas.

Maybe it wouldn't explode on me.

So just to make sure Yep, it would go.

So it's not an increase in pressure that causes a bottle to explode like that.

So Why is it way shouldn't feel bad If you predicted that the pressure would increase Because in fact, that explanation was published in New Scientist in 1986 leading many other scientists to come forward saying that is not the real explanation.

So we will find out what it is after we explore the second perplexing physics problem.

Consider this.

If you put identical ice cubes in a cup of fresh water and a cup of salt water, which Ice Cube will melt first again, you can register your prediction by answering the pole here.

As you're thinking about that, I want to show you the setup.

Okay, so here I have regular fresh water just gonna fill up each cup.

Then I'm gonna add about a tablespoon of salt into this cup on the right.

If you know a bit about chemistry, you may recognize that adding sodium chloride, toe water actually takes energy, and so it lowers the temperature of this solution by a little bit.

So I've got a thermometer just to check, and I'm gonna let this solution sit here for a while s so that it comes back up to room temperature.

Okay?

Have you made your prediction.

Let's put these ice cubes in in 321 and they're off watching ice cubes melt.

Isn't this entertaining YouTube?

It has only been about a minute, but already I can tell that the ice cube in the fresh water is melting faster than the ice cube in the salt water.

How does that make any sense?

And we put salt on the roads to melt ice faster.

So why isn't this ice Cube melting as fast as the one in fresh water?

Well, that is what I'm gonna explain.

But first, let's go to the third perplexing physics problem.

Okay, here I have a metal ring and a closed loop of chain, and I'm going to do this all in one take, so you know that I'm not playing any tricks.

So what I'm gonna do is dangle the chain and then hold the ring over it like so.

And then I'm gonna drop the ring.

And exactly what you expect happens.

The ring just falls off this chain.

And of course, how could anything else possibly happen because, Well, it's a closed loop of chain and a closed ring.

But if you think about it really hard.

You can get the ring to stick on the chain.

Have a look at that.

So how does this work?

I think we're gonna have to go to some slow mo footage to really see what's going on.

Now I'll let you in on the secret when you want the ring to stick on the chain.

The key is to let it go on one side before the other side's.

I'm gonna let it go with my thumb first, and it'll just sort of slide off my finger.

And by doing that, the ring will stick on the chain.

It introduces just a little bit of rotation so that the ring rotates about 90 degrees and slides down the chain like this as it does These pieces, uh, slide up the sides and when you get to the bottom, it's almost like this.

Peace at the bottom gets sucked into the middle of the ring and then at the last minute, gets pulled round and it snaps on and it's locked on like that.

So that's how you can get a ring locked onto a closed loop of chain.

So back to problem number two.

Why is the ice cube in freshwater melting faster than the one in salt water?

Well, I think we can get a better view of this if I add a little bit of food coloring right on top of the Ice Cube because the water coming off that ice cube is cold.

It's more dense than the surrounding freshwater, and so it descends in the glass.

And that brings Maur warm, fresh water up to meet the ice cube, melting it faster, whereas on the other hand, in the salt water, as the ice cube melts, that fresh water is actually less dense than the salt water around it.

And so it stays That cold water that just melted off the ice cube stays around the ice cube, in effect insulating it from the warmer salt water around it.

Okay, that seems like a very plausible explanation and maybe a convincing demonstration.

But in the end, it me from the future.

I decided that, you know, maybe this wasn't the best way to explain this because, well, you're just dropping food coloring in there.

And maybe food coloring would just float on the surface of saltwater anyway and sink in fresh water.

So not a good demonstration.

So a better demonstration, I thought, might be way.

Use colored ice cubes to begin with.

Okay, I know there's a lot of food coloring in there, and that makes things kind of hard to see.

But I think you can clearly see the current of cold water streaming down to the bottom of the cup in the freshwater side and not in the salt water side.

So I think this does clearly show what ever saying that cool water that comes off the Ice Cube doesn't go down deep into the cup Over here, you can see that's what's happened.

So why do shaken carbonated drinks explode?

First, let's explain why the pressure doesn't increase in the headspace when you shake it up.

This is because of equilibrium.

You know when you pick up a bottle of soda in the grocery store, it's been sitting there for a few days.

So the dissolved gas, the dissolved CO two in the liquid is it equilibrium with the gas up here in the headspace?

And that equilibrium on Lee depends on the temperature and the pressure of gas in the headspace.

So no amount of shaking is gonna change the pressure up here for most soda bottles these days, that pressure is about three atmospheres.

Now you can actually hear those three atmospheres of pressure get released when I open the bottle.

But of course that's not messy because it's just gas coming at the top.

There's no liquid, but now the liquid is no longer in equilibrium.

I mean, it used to be under three atmospheres of pressure, and now it's just under one atmosphere, ambient pressure.

And so because of that, there is more dissolved CO two in this liquid then would be at equilibrium at this pressure.

And so the co two starts to come out of solution and, well, those of the bubbles that you taste.

That's why this drink is busy non equilibrium beverage.

And if you leave it open, those bubbles will keep coming out until the whole drink goes flat.

Now, I'm gonna put the pressure gauge on top of this bottle so we can actually see the CO two coming out of solution and increasing the pressure right here.

And if I left this bottle alone for long enough, the pressure would eventually come back to equilibrium.

three atmospheres.

But as you can see, it is a very slow process.

And that's because it's actually quite hard for dissolved gas like CO two to spontaneously come out of solution.

One way that I can accelerate this process is by introducing nuclear nation sites into the liquid.

One example of a nuclear nation site is a tiny gas bubble.

So if I shake up the bottle, what I'm actually doing is introducing little nuclear nation sites.

Tiny air bubbles into the liquid, and that makes it easier for the CO two to come out of solution.

And so we'll see this pressure increase much more rapidly.

You ready?

I'm gonna shake it up in 321 And there you see, the pressure has quite quickly come back to about three atmospheres.

320 killer Paschal's.

So if you shake up a closed carbonated drink that's been an equilibrium, well, you are not increasing the pressure in the bottle, but you are introducing tiny air bubbles into the liquid.

Which act is nuclear ation sites.

Some of them cling to the walls of the bottle, so when you go toe open it, those bubbles do two things first they expand due to the decrease in pressure, and that pushes up the liquid above them.

And second they act is nuclear nation sites, allowing the dissolved CO.

Two to come out of solution much more rapidly.

And so that's what leads to the carbonated drink explosion.

But this suggests a way to disarm a shaken carbonated beverage.

And that is by flicking the walls of the bottle that gets rid of those bubbles that air clinging to the sides and allows you to open the bottle without incident, huh?

It worked there.

Is there a way to introduce nuclear nation sites into of carbonated drink without shaking it?

Yes, that's exactly what you're doing when you put a mentos in a carbonated drink.

The rough surface of the Mentos acts as a nuclear nation site, which allows the CO two to come out of solution much faster, creating the soda fountain me again.

So when I showed this video to Diana, the physics girl, she asked whether paper straws have more nuclear ation sights than plastic ones.

And to be honest, I'm not sure about the research around this, but there are some other YouTube videos that is showing how drinks overflow when you put a paper straw in.

And also my little preliminary analysis with this paper straw show that it does indeed create more bubbles than a plastic straw.

So if you needed another reason to hate paper straws, well, there you go.

They make your carbonated drink more fizzy as it comes up the straw.

This has been three perplexing physics problems.

If you have any other perplexing science problems, put them in the comments below Theo.

Hey, this portion of the video is sponsored by Squarespace, the all in one platform for building a professional website, online store or portfolio.

In fact, about a year ago, I remade my website very tasking dot com, on square space, and I found it so much quicker, easier and cheaper than going through a Web developer who I always had to contact in order to make changes.

Squarespace gives me great analytics so I can see who's coming to the site and when, from where and what they're spending the most time on.

And that allows me to see what people are really enjoying, which helps me decide what to make next.

Now, if you're just getting started.

Well, you can purchase your domain directly through squarespace, which saves you the hassle of setting up domain name servers and all that kind of stuff.

Plus, each domain comes with free.

Who is privacy?

Because nobody wants a domain that reveals all your details.

And if you want to run email campaigns, squarespace come dude, that making the look and feel of all your communications consistent.

Or how about an online store?

Squarespace can do that, too, with e commerce templates, inventory management, streamlined, check out and secure payments.

So it really is the all in one online platform, and you get 24 7 email support any time, day or night.

You can reach a squarespace employees in their offices, where they will respond to your query, typically in about an hour.

So what are you waiting for?

Checkout squarespace dot com for a free trial.

And when you're ready to launch, use code very taxing to save 10% off your first website or domain purchase.