So they were going to take a look at a new options that here this is a MSG option.

Dress up parts that would be modeling support goods, not mobile suit.

Gundam.

Of course, this is the side of cloaks.

So here these are just option parts for your prime arms girls or my gummy device or frame arms kits as well.

He could use thes four as well, and there's actually a full cloak.

But it's they separated into two parts again.

See here on the back this would be the full clothes.

They separated the center parts and the side parts as two separate kids, which is kind of annoying.

Wish they would have just made us one separate get but under their hand if you only wanted the side cloak or something.

And I guess this is better because this is not actually all that cheap, unfortunately, is a little bit expensive, really, for what it is, in my opinion, to go appear on the top of the box.

The list price for this is 1300 yen.

So that's what this is the price of, ah kind of smaller, regular sort of h g kit, and it's just like these parts.

That's pretty much it.

But could've stuff is always a little bit more expensive, and these, I believe, have this kind of pre painting on their of kind of like this smoke effect there around the charred edges of this.

So I guess you got to kind of figure that into the process of why it's gonna cost a little bit more, of course.

But anyway, let's take a look at this.

And so you just kind of got this images of what it looks like.

They're on the front and side of the box there.

This would be the gin wry right that they're showing it on there.

And then the go right there in the background.

Yeah, Then, once again, just the jinn right here on the back as well for that.

So I just went with the side cloak just because I think I like the school's, like this look of just covering one arm, so I'll probably use this for two separate kids.

I'll do like one on one kid, and then I'll use another one for another kid later.

I won't use them both on the same kid.

Probably cause just yeah, but anyway All right, let's check this out.

So, as always, guys big thank you to s a gun store for sponsoring this review.

Give me the chance to check this out.

So if you guys want to check this out or anything else Of course.

The link to us.

I got him.

Store will be down below.

Check that, and then you can save 10% off everything on their site using coupon code Taco Earliest 10.

All right.

I hate the stickers on their way, but yeah, check the length to their side.

They're down below, and it looks like we aren't having any pre painting on these parts for that chart edge.

So I was wrong about that.

It's just going to be the parts themselves.

You got the one big part.

They're one big part for the other side and then a couple of small parts there for the tops.

And unlike the connector pieces and that is it so very simple, very minimal here in the box.

And it was just the instructions for that.

How to attach it.

So it's going to hear those gonna attach onto the arms.

If you're familiar with any frame arms kits, basically you've got like, the upper arm connects into the lower half of the upper arm.

So in between there is where you're gonna plug this connector piece, so that will be discounted on like that.

And then you can plug on these parts over the shoulders, and that's how that all works.

There is just a couple sample images.

They're here is showing how to combine it with the center cloak or the middle click.

I'm not sure what the camera with a name for that is, but you can see the full cloaked version, so I didn't really want to go for the full cloak.

I like just this side of the bed.

Here's the parts list here as well.

So for the moment, here is the A runner, and it is just a regular hard plastic.

It's not like in like a little bit softer vinyl or anything like that.

So just your typical police terry in plastic for this, I'm the molding on.

It does look good, but no pre paint or anything on that.

So if you want that chart effect, you let's just get a little bit of black and just gonna spread that around here that I just shouldn't be too hard to do.

But I'll get this, you know, put together as it were, as much as it could really go together.

And let's try it out on a few kids to see how it looks.

All right, split together just straight out of the box.

I mean, they're pretty cool, but they're obviously not going to do a whole lot on their own.

So we need to try these out on a couple of kits.

First we're gonna try this out on is the firearms girl Go.

Right, Kai.

So let me just attach these onto here.

All right?

There we go.

Just so he doesn't see the fact, I just want to show it to you guys with just one arm covered here first, because that's a pretty cool look as well.

And, uh, kind of Ryan's assault of the Xia repair one.

I guess I would just be just the extra repair right?

Was the one that just had just the one cloth covered arm was pretty cool.

Look, and so does look pretty cool here on some other stuff as well.

Obviously, here on the go Rock, I it's pretty cool look, but will put on the other arm here just to see how that's gonna look as well.

All right, so that both sides attached are definitely going to be looking really cool.

And you could make some really cool effects.

I think with these, the add a lot of just dynamic.

Look to the kid.

I think, Well, it's like they don't have that pre painting the charred edge on there.

You might want to go and do that in yourself, but at least they are in that nice matte finish that they do look pretty cool, I gotta say, just straight out of the box like this as well.

The one thing, though, is that they are a little bit heavy and especially if you're holding a big giant cannon like the gore eyes got there attached onto arm.

That arm is gonna be pretty heavy now, so it's just kind of a miracle that it's not falling down because the shoulder joint is really getting taxed.

I think by the way of everything, it's hold on there for the time being, but with the weight that's on there, especially holding heavy weapon just to be sure that you've got that joint in the shoulder nice and secure.

Maybe tighten that up with little glue or something like that.

But he's do ads and weight onto the arms.

But that is unexamined of how these look on a frame arms, girl.

But how about, of course, just on the regular go right frame arms kit?

Well, that is where we're gonna be running into problems because, as this is made for free Mars girls, how it has this ring here that fits there on the arm.

The go ride doesn't really particularly have that.

And even if it did, it'd be kind of hard with this giant shoulder armor in the way.

Now, one thing that you could do with this if we remove the shoulder armor on, then remove this pig here from that bit, they say there is no hard point here on the outside of the architect frame part of the shoulder here.

But if you were to this drill a hole in there and then use a connector piece, you could then connect this onto the side of the arm like that, but it's still not really very convincing.

So I think probably what our best option is gonna be is just removing the arm entirely and then having this to be looking like it's just a cover for where the arm maybe was removed or completely taken off.

Problem that I'm finding now, though, is that the peg is not quite long enough to fit into their this kind of can't really fit or are.

It's in fact, a slightly different sized pay, which is hard to believe because could've okay, usually sticks to the same three millimeter peg size, and it seems like it almost fits.

But it's really super and tight and not quite fitting in there.

So it looks like if you wanted to use this on a frame arms kit, you're in for a little bit of modification.

That's going to work or required, at least for the go right here.

Of course.

Anyway, every frame of risk is a little bit different, so other kids it may fit on there a little bit better.

I'm not going to try it on every single premium skit that I have here.

The important thing to know is that's probably going to end up taking some modification or if this to be used with an actual frame arms kid, but with frame arms, girls, kids, they look pretty awesome.

So really happy with these.

They're pretty cool have I do have the gin wry, which is like the kid that's modeled on the black boxes we saw.

I don't have it built up at the moment, so I'll have to get that built up and reviewed for you guys in the future.

And maybe in that review will try outs from these parts again.

Just we can see how they look on the general, because it does look pretty cool in the promotional material.

But that's it for the side of clothes here.

If you guys have another.

Further questions or comments about these fields relieve those down below.

Hopefully, the review is helpful for anyone who's interested in just checking out these parts.

They're pretty simple and a little bit expensive for they are, but they do look really cool.

So if you're looking for this type of thing for your frame arms, girls gets origami device kits, then I would say definitely worth picking up there.

And I said cool effects to the kids.

So thank you guys for watching.

And I'll see you next time.

Bye bye.