Greetings, and welcome to an LGR thing

and this thing is a Packard Bell Multimedia model 955, a late '90s

white box computer that is pretty notoriously... not good. *chuckles!*

This is not worth restoring in any objective sense,

and yet, that is what we're going to be doing here today!

Putting it back together to its factory original condition and then some,

and just seeing what kind of horrors and weird, strange things we come across.

In a subjective sense, I really enjoy these machines. These Packard Bell computers are very nostalgic to me,

you know, I- it's a fascinating example of one of those late '90s cheap computers that were all over the place.

This one in particular was actually in the top ten of computers being sold in late 1998, and it came

equipped with the then-new Windows 98 (that's the first edition),

and an AMD K6-2 processor running at 330 megahertz.

Well, this one doesn't work whatsoever, but,

one reason that I want to try to get it working again is because overall, it's in pretty decent shape.

It just needed a little bit of Goo-Gone, just get the crap off the side there from some tape.

And, the rest of the case is...

already relatively clean, it just needed a little bit of dusting on some of the edges here and there.

But yeah, you can see that there's just not much dirt that this paper towel is picking up at all.

Even the underside of this computer is looking pretty good!

And I have seen some NASTY Packard-Bells of this era. These things were very unloved in later years.

Alright, let's get inside of the case itself, and you can see the *delightful* late '90s crappy, cheap PC design inside.

Cable management?

Nope, this is cable anarchy, which was actually pretty par for the course, especially with these pre-built machines back then.

So, some of the specs, you get the aforementioned AMD K6-2, 330 megahertz with 3DNow! technology.

And also, this was right on that edge of the "capacitor plague" of the turn of the millenium,

so I did want to check the capacitors in here too. Thankfully, they look okay.

This 955 dooesn't have any RAM at all. It hasn't since I've owned it.

It originally had 64 or 128 megs,

and it came with this Maxtor 8.4 gigabyte IDE hard drive.

Another thing I really wanted to check because it's notoriously a very bad part is the power supply,

And... unfortunately, yeah, this is one of the 90 watt G-Powers that is eh... *Chuckles*

Well, it's got a reputation for blowing up, setting on fire, or just crapping out in spectacular fashion, so

we're going to replace that.

In fact, this one smelled like it had already kicked the bucket, like it smelled *awful,* so yeah, it needed replacing anyway.

Also something that I wanted to replace is this cooling system, or at least the fan, because its horribly loud.

I'll probably keep the heatsink, but then there's the fact that the CPU is completely *stuck* to this.

That thermal grease needs replacing too.

So yeah, just snapping that off there with a screwdriver and there we go, we've got some caked-on thermal grease,

it's been on there for like 20 years, almost.

Next up is to take out the hard drive, or well, that was the plan...

It doesn't seem to slide out of there or come out at all. I- I don't know how that's attached.

Turns out I had to take off the front cover of the entire computer,

and there are four screws, screwing in the hard drive from the front.

Anyway, taking those out and the hard drive just plops right off right there, and there you go.

There's a hard drive that I'm going to be replacing because...

Last time I had this thing powered on, it was popping and skipping and making horrible grinding noises.

This thing is on its last legs.

Down in the bottom of the case, I noticed that there was an ISA slot and something plugged into it that I didn't recognize, and it turns out

that we have here a Symbios Logic controller card for SCSI.

This was not something that came in there stock, but I'm gonna leave it in there. That's kind of useful.

And this was at a time when computers were starting to move away from separate cards for video and sound,

and in this case, it has a built-in integrated ATI Rage IIC AGP 3D chipset,

and a 16-bit Crystal SoundBlaster-compatible thing.

Oh, I dunno. I've never used one exactly like this one, so we're gonna see what it does.

Okay, time to addressed that caked-up CPU,

and I'm just gonna get some anti-static foam here and place the CPU down in there so we don't mess up the pins,

and then I'm just gonna use one of these decal removers with a plastic blade,

These are usually used to remove decals from cars and whatnot, but it works very well

for getting rid of this crappy thermal grease junk that's all over this thing.

And just using a cloth and some isopropyl alcohol and we get it all cleaned up, and there, look at that shiny new-ish looking AMD K6-2.

What a perfectly average CPU for the time. And that's the point, at least for this project.

Next, I'm gonna remove the CR2032 3 volt BIOS or CMOS battery.

It's needing probably to be replaced soon. It's been almost 20 years, so...

Ah yeah, that's fine, just a standard battery. Those can be found really easily.

And I was surprised that the inside of the computer is actually pretty clean too!

It just needed a little bit of scrubbing with a toothbrush and some distilled water and cleaned right up.

It was just a little dusty.

Got our freshly-cleaned CPU right here, no bent pins, thanks to that nice foam.

And we'll just line up the notch with the notch and uh, put it right back in place and there we go.

Zero insertion force Socket 7.

I ended up keeping the heatsink and I just replaced the fan with this Cooler Master fan, which is used,

I had it lying around. I hope that it's quieter than the crappy one.

Okay, some fresh thermal paste and put that back in place. Clips together and... lookin' good!

Now, for the RAM situation. It had none in there at all.

We're gonna put the maximum, at least from the factory: a 128 megs of PC133.

Mmm! This brings back some memories.

I upgraded my Compaq Presario with almost this exact stick of RAM back in 2000 or something.

And the second slot from the left is slot one, so that is where it's going to go.

Time to replace that Maxtor drive that sounded like a friggin' train wreck,

and we're swapping it with this Western Digital, which is something from a Compaq

that I had, but it's blanked-out and it works and it's "quiet."

It's the same capacity, pretty much.

And just got to mount it to the front of case again, which... *Chuckles* I- You know-

I'm assuming this was some sort of a cost-cutting measure. That way, they don't have to have any kind of caddy or...

tray or mounting... things in here. It's like, "Oh, just stick it on the front of the case and put some holes in it."

And yes, I did actually hook up the older drive to my modern machine and imaged all the contents,

But we probably won't need to use anything from it, as you'll see in a moment.

Finally time to get rid of that fire hazard and dreadful old power supply,

and replacing it with the Lite-On version that Packard Bell also used on these.

Pretty much the same exact power supply: 90 watts, it's the same form factor and everything, but...

It doesn't blow up.

Or at least it shouldn't, and I checked all the caps and everything and it seems fine, so...

we're going to go ahead and put that in here.

And, I've restored it to its factory-original cable management.

Ahhh, look at how "clean."

'Mkay, gonna stick the side of the case on here, and another small touch but something that I think is-

I dunno, it's something that makes me happy- is putting fresh case screws on the back here.

So I'm to fit the original aesthetic; no thumbscrews or anything like that.

And it actually didn't have any, so yay! That makes it feel more complete.

It's about time for the moment of truth. Time to try this thing out.

I've got a monitor here, I'm going to plug in all the accessories and stuff that I need to

to see if everything is working for its first boot.

Turning on the power, aaaaannnnnndddd.....

Alright! It looks like we have some... display, which is good.

And it detects the new hard drive and the CD-ROM and whatnot, and we'll go into the BIOS here and...

Uh.... *Chuckles* Well, great, it has a password on there from the previous owner,

and since I was not the original owner of this, I dunno what it is. It disables the system if you try to do anything.

So what you do for this is you just go in there in the motherboard and switch the CMOS jumper here to clear it.

Switch that over, power it on, put it back,

and then there you go, the password is gone and you're able to access whatever you need to in the BIOS,

which isn't much in this case, but I just didn't want a password on it.

Next step is to take care of the hard drive itself and get it ready to install Windows and whatnot on,

I'm going to use a Windows 98 boot disc here, and run fdisk, enabling the Large Disk Support so we can get the full 8 gigs.

And once that's done, I'm going to use one of these Packard Bell Master CDs.

This one's from August '98, just about when this was manufactured

and this comes with all the drivers and the software and everything that the Packard Bell computers would have come with, at the time.

Unfffoortunately... the CD-ROM doesn't want to read it.

At first I thought maybe it was because I burned the disc, but then I tried an original Windows 98 disc,

and that didn't read either, in fact, no CD that I tried was reading, and I swapped the cables and did some settings, nope!

It seems that the CD drive is dead.

So that's fun. Time to take it apart once again,

and take off that front cover *once again,*

and get this original CD-ROM out of here!

This is another Lite-On model, an LTN-301, 32x CD-ROM.

Uh yeah, I ended up trying it on another computer just to be sure, ah, it doesn't work at all, so I'm just replacing it with

another Compaq spare that I have lying around, this is a little faster... a 48x,

and the LED isn't in exactly the right spot for the front of the case, but...

It'll work for now. I just wanna get things installed on here.

Also, that Cooler Master fan that I put on the CPU... *Chuckles*

It turns out that was really noisy too, not as noisy as the one that it had on there, but it's still louder than it needed to be, so...

I had a few of these brand-new StarTech CPU coolers,

and considering these are still new in the box, I figured they should be much quieter,

and thankfully, they were. So I got that installed on there really quickly, no problem.

And while this was opened up, I happened to notice that its Mitsumi 3½ floppy drive...

the eject button is missing - the little plastic piece is supposed to go on this metal clip right here,

it's just not there, so when the case is on the computer,

you can't eject the floppy without a screwdriver, so I'ma have to fix that at some point.

Anyway, onto that Packard Bell Master Disc in the new CD-ROM drive, and

here we go! It booted up perfectly fine, no problems at all.

And this is the Master CD Restore System. We're going to be doing...

the "Restore System," because there's nothing on this hard drive whatsoever.

In fact, it has not even been formatted.

So that is one thing that program is going to do here... is completely formatting that,

and writing the drive table, creating directories, and copying files over and all that good stuff.

As much as I *like* fresh Windows installs with no OEM bloatware or anything like that on here,

I also don't wanna mess around with trying to track down all the drivers and stuff for the hardware that's in here, so...

It's kind of nice with these pre-built machines to just have the OEM, original master disc, and just

does everything automatically, all the setup of all the files and all the programs and the drivers, and just does it in one go,

including all of the stuff that it normally came with, like Word 97 clipart.

Oooh!

Yeah, there's a lot of stuff in here that I really don't need and I'll probably uninstall,

but still, it's worth it, I think, to have that original fresh from the factory feel, which is what I'm going for.

You still need to put in the Windows 98 product key, which, you know, whatever, no big deal.

And then you're greeted with the Packard-Bell introduction, ooh!

VO: "Thank you for buying a Packard-Bell computer.

We've included some special features to help you get the most out of your new machine."

Yeah.

"In the lower right of the screen, you'll find the navigator assistant.

This convenient group of buttons lets you access some of the most important features on your computer."

Well that was useful... sort of.

Not really, like pretty much all the stuff that's pre-installed on here, it's just filled up -

look at all those icons in the taskbar and all those shortcuts on the desktop and that weird ribbon thing, I mean...

*Chuckles* It's just... Ohhh no!

Oh hey, you can switch your wallpaper on the fly, so that's... worth it.

It did come with a few pre-installed pieces of software I was not familiar with, it's kind of intriguing, like KiddoNet.

[♪ Jaunty MIDI Music ♪]

It's like a safe space for kids to play around with, like Internet '90s things and games and...

Uh, whatnot, it's just uh...

[♪ Cartoony Crash SFX ♪]

*Chuckles*

Oh, I like these things, I dunno why. I mean, I do know why, because... I- I like them.

But, you know, look at that, you can color things, there's MIDI music playing, you can go to fake websites,

and *real* websites if you have an internet connection, which, I dunno, maybe I'll hook up the Internet to this at some point,