字幕列表 影片播放 列印英文字幕 00:00:01,950 --> 00:00:04,260 Colt and Scott, in this competition we were inspired by history's legends. Now we ask that you continue to be inspired by history's legends as we send you back to your home forge to make one of these. 00:00:17,390 --> 00:00:20,510 Excalibur! It's actually not Excalibur. The sword in the stone is a medieval broadsword. Good luck, bladesmiths. We'll see you in four days. 00:00:33,585 --> 00:00:36,440 SCOTT: Today, I'm making a European broadsword. I'm going to do two types of twisted masses going opposite directions and a linear bar for the center. I am very happy to be back home. I know that I have all the proper tooling to do stuff very quickly, but I think it's going to be a very challenging competition. It's the end of day one. I got the twisted masses done. I've got to cut them to size and then clean up the edges that I'm going to reweld. That's where it's at right now. I'm feeling pretty nervous going into the clench, really hoping I don't get any warps or cracks. 00:01:17,168 --> 00:01:18,590 Oh, [BLEEP]. COLT: It's taken a warp. I'm really struggling here. I'm bending it, seeing if it will straighten. I'm heating it up with a torch and trying to drop water droplets on it to see if I can set it back into shape. I finally get this warp out by taking my pair of tongs and pushing down on the sword. That straightened it out a little bit. Trying to fix the warp really set me back, but tomorrow I'm going to come in with a fresh mind and see what I can get done. SCOTT: Yesterday was really productive. I got the three bars of Damascus put together, forged out to a sword, and then I got it ground down. Today's most important thing is getting that heat treat done. If I can get it done early, I can focus on the handle for the rest of the build. 00:02:09,210 --> 00:02:14,210 It's pretty straight, and it definitely heat treated. I'm just going to clamp it while it cools. I thought I had the heat treat right, but unfortunately after I pull it out, it's got a nice warp in it. Oh, [BLEEP]. 00:02:26,890 --> 00:02:29,369 It looks like I might have to heat treat again. The one difference is I'm going to use my quench tank as my temper oil. I'm going to get the oil up to the same temperatures as I would the oven, to about 450 degrees, then hold my sword in it for at least 10 minutes so it gets a nice soak. 00:02:46,800 --> 00:02:50,920 Pull it out of the quench, and it comes out almost perfect. All I have to do tomorrow is fit and finish, guard, handle, pommel. COLTON: The theme of day three is handles and guards. All that needs to be done is etching and sharpening on the blade. I'm going to acid etch the blade now, let it sit in there for a few minutes. So the top of the blade is not hardened as much as I would like it to be. I want to make sure that it's not going to take a bend or a set. 00:03:21,990 --> 00:03:24,160 It seems to have held up pretty well, so the last thing I need to do is the handle. It's the end of day three. I have the finished blade. I've got the guard fit up. The handle is shaped like I want it. All I have left to do is the pommel, and it's done. SCOTT: Beginning of day four, I'm ready to get the sword finished. First I need to get the holes drilled on the guard and the pommel. And that's all I need. It's looking pretty good. End of day four, this broadsword is built, and I am ready to go have dinner with my wife. All right, bladesmiths, welcome to the kill test. It's time to get medieval on your broadsword. I'm going to take your weapons, deliver some slashes and blows on this ballistics dummy. Colton, you're up first. You ready for this? Yeah. Let's have fun. COLTON: I'm feeling confident about my sword, but I really don't know what could go wrong. I've never made a sword before. 00:04:28,196 --> 00:04:32,180 [MUSIC PLAYING] 00:04:47,618 --> 00:04:50,690 That thing was sharp. DOUG: All right, Colton, first up, I really appreciate the balance you have with this because it's easy to wield with forward slashes, back hands, and thrusting with it. Your edge is sharp. Now your handle, it's just a little bit too tall for me in the tense of it's wider here. But I can still get a good grip on it, and more importantly, this sword, with its balance, it will kill. Thank you. All right, Scott. It's your turn, sir. You ready? Yes, sir. DOUG: Let's do this. I'm ecstatic to see Doug playing with my sword because it's exciting to see what it can do to the human body, what it's built for. 00:05:31,098 --> 00:05:34,584 [MUSIC PLAYING] 00:05:54,006 --> 00:05:55,539 All right, Scott. First up, that is beautiful to look at. Thank you. DOUG: Now the wire wrap does give me some kind of contours to hold onto. Every slice-- or should I say chop-- dug deep into this ballistics dummy. Overall, the kind of weapon and damage you can do with this, it will kill. Thank you. 00:06:20,000 --> 00:06:21,000 All right, gentlemen. It's time for the strength test. Now to test the strength and overall construction of your blades, we have the battering-ram chop. Colton, you're up first. You ready? - All right. OK. 00:06:36,150 --> 00:06:39,599 I'm worried that my blade is almost too light. I made this blade for slicing, not chopping trees down. 00:06:47,648 --> 00:06:51,616 [MUSIC PLAYING] 00:07:14,950 --> 00:07:17,260 So Colton, there's some definite issues in the heat treat. Right here at the guard, you picked up a bend, and it's not a warp. This sword is now bent. And also up here where the sword is the thinnest right at the end of the fuller. It's a beautiful piece, but that's a major problem. 00:07:39,900 --> 00:07:40,599 That's severe. Does it feel like it could continue testing? I wouldn't. I mean, it's like a gun barrel that's already curved. I don't want to fire something like that if it's not extreme. If it's here, it's one thing, but it's all the way. It starts at the handle. Yeah, I mean, it's already failed as far as I'm concerned. I'm seeing the judges talking, and it's nerve wracking. 00:08:00,000 --> 00:08:02,909 All right, Colton, there's a problem with your blade. The judges have given your blade a vote of no confidence. In other words, it held together, but it's not safe to move forward in testing. That doesn't mean that you've lost this competition. Scott, your blade still has to hold up in this strength test. Dave? 00:08:20,530 --> 00:08:22,130 SCOTT: I am very nervous. I am very, very nervous. I don't know how it's going to do. All I can do is trust that I built it correctly. [MUSIC PLAYING] 00:08:48,850 --> 00:08:52,990 So right off, Scott, everything's solid and tight. All in all, I think you did a great job. Nicely done. Thank you. 00:09:00,000 --> 00:09:03,760 Colton, unfortunately for you, this means that your blade doesn't make the cut, and you cannot be the "Forged in Fire" champion. For that reason, I'd like to invite you to shake our hands, shake Scott's hand, and then please leave the forge. Come on forward, my friend. How old are you? 18. Hey, man, the world's yours. I knew the bend could have possibly happened. He outperformed me, and that's OK with me. I can be outdone. Good job. Thank you. I might not have worn "Forged in Fire," but I have learned so much as a bladesmith, and I have grown as a person doing this competition. Scott, congratulations. You are the "Forged in Fire" champion, and that is a title that comes with a check for $10,000. Good job, my friend. [APPLAUSE] Thank you. Come on forward. Excellent. - Thank you. SCOTT: I won. My blade survived. I feel ecstatic, amazed, however you want to say. I hope that by doing this, I can go full-time bladesmithing.
B1 中級 美國腔 烈火中鍛造。LETHAL and EPIC Broadsword Final Round (Season 7) | 歷史沿革 (Forged in Fire: LETHAL and EPIC Broadsword Final Round (Season 7) | History) 8 0 林德哲 發佈於 2021 年 01 月 14 日 更多分享 分享 收藏 回報 影片單字