Placeholder Image

字幕列表 影片播放

由 AI 自動生成
  • Almost all of your AirPod Pro's basic controls

    你的AirPod Pro幾乎所有的基本控制功能

  • are based around the force sensor,

    是圍繞著力傳感器進行的。

  • a small touch pad built into the stem.

    一個內置於莖部的小型觸摸板。

  • We will be going over seven ways

    我們將從七個方面進行介紹

  • to utilize your AirPod Pros.

    以利用你的AirPod Pros。

  • To use the force sensor,

    要使用力傳感器。

  • you need to lightly squeeze the stem.

    你需要輕輕地捏住莖。

  • Squeeze the stem once to play or pause

    擠壓莖部一次即可播放或暫停

  • whatever's currently playing.

    目前正在播放的是什麼。

  • Also, if you're receiving a call,

    另外,如果你接到一個電話。

  • squeezing once will answer it.

    擠壓一次就能回答。

  • Squeeze the stem twice to skip forward to the next song.

    擠壓莖部兩次可跳到下一首歌曲。

  • If the app you're using doesn't support this,

    如果你使用的應用程序不支持這個。

  • squeezing twice won't do anything.

    擠壓兩次不會有任何作用。

  • And if you're receiving a call, squeezing twice

    而如果你正在接聽電話,擠壓兩次

  • will reject it and send the caller to voicemail.

    將拒絕它,並將呼叫者發送到語音信箱。

  • Squeeze the stem three times to skip backwards,

    擠壓莖部三次可向後跳。

  • either to the beginning of the current song

    或到當前歌曲的開頭

  • or to the last one.

    或到最後一個。

  • If the app you're listening to doesn't support this,

    如果你正在收聽的應用程序不支持這個。

  • squeezing three times won't do anything.

    擠壓三次也無濟於事。

  • Another AirPods Pro signature feature

    另一個AirPods Pro的標誌性功能

  • is noise-cancellation mode and transparency mode.

    是噪音消除模式和透明模式。

  • Squeeze and hold the AirPod's stem

    擠壓並握住AirPod的手柄

  • to switch between noise-cancellation mode

    在降噪模式之間切換。

  • and transparency mode.

    和透明度模式。

  • You'll hear a light ding when the change goes through.

    當變化通過時,你會聽到一聲輕響。

  • You can also change between these features on the phone.

    你也可以在手機上改變這些功能。

  • Slide down the top right corner of your screen

    在螢幕的右上角向下滑動

  • to access the control center.

    來訪問控制中心。

  • Press and hold the volume meter.

    按住音量表。

  • Click on "Noise Control"

    點擊 "噪音控制"

  • and choose between "Noise Cancellation,"

    並在 "噪音消除 "和 "其他 "之間進行選擇。

  • "Off," or "Transparency."

    "關閉",或 "透明"。

  • You can wake Siri with your AirPods

    你可以用你的AirPods喚醒Siri

  • just by saying "Hey, Siri" out loud

    只要大聲說 "嘿,Siri "就可以了

  • followed by your request.

    然後是你的請求。

  • Hey, Siri, search Tech Insider on YouTube.

    嘿,Siri,在YouTube上搜索Tech Insider。

  • Siri: Here are some videos of Tech Insider

    爵士樂。以下是Tech Insider的一些視頻

  • I found on the web.

    我在網上發現。

  • Narrator: You can also set up Siri

    敘述者。你也可以設置Siri

  • so it'll automatically read you any message you receive

    所以它會自動為你閱讀你收到的任何資訊

  • while you have your AirPods on.

    當你戴著你的AirPods時。

  • Open the settings app, click "Notifications,"

    打開設置應用程序,點擊 "通知"。

  • and then click "Announce Notifications."

    然後點擊 "宣佈通知"。

  • Here you can adjust your announcement notifications.

    在這裡,你可以調整你的公告通知。

  • To activate the spatial audio features of your AirPods,

    要激活你的AirPods的空間音頻功能。

  • slide down the top right corner of your screen

    在螢幕的右上角向下滑動

  • to access your control center.

    來訪問你的控制中心。

  • Press and hold the volume meter.

    按住音量表。

  • Click "Spatialize Stereo."

    點擊 "Spatialize Stereo"。

  • Here you can turn on "Fixed"

    在這裡你可以打開 "固定"。

  • or "Head Tracked" spatial audio.

    或 "頭部追蹤 "的空間音頻。

  • Fixed makes the audio surround you,

    固定使音頻圍繞著你。

  • but it sounds the same any direction you look.

    但無論從哪個方向看,聽起來都是一樣的。

  • Head tracked makes it so the sound will change

    頭部跟蹤使得聲音會發生變化

  • if you move your head

    如果你移動你的頭

  • as if you are listening to a single speaker in front of you

    就像你在聽你面前的一個揚聲器一樣

  • instead of headphones.

    而不是耳機。

  • You could also select "Off" for a standard stereo sound.

    你也可以選擇 "關閉 "以獲得標準的立體聲。

  • To customize your AirPods, open the settings app,

    要定製你的AirPods,請打開設置應用程序。

  • then click "Bluetooth,"

    然後點擊 "藍牙"。

  • then click the i next to your AirPods.

    然後點擊你的AirPods旁邊的i。

  • Here's where you can change your AirPod's name,

    在這裡,你可以改變你的AirPod的名字。

  • adjust noise control, configure your press-and-hold options,

    調整噪音控制,配置你的按壓式選項。

  • run an ear tip fit test, and configure spacial audio.

    運行耳尖貼合測試,並配置空間音頻。

  • Charging your AirPod Pros is easy.

    給你的AirPod Pros充電很容易。

  • Place them inside the charging case

    將它們放在充電盒內

  • and connect it to a lightning cable connection

    並將其連接到一個閃電電纜連接

  • or a Qi-certified wireless charging pad.

    或一個Qi認證的無線充電板。

  • When you start charging your AirPods,

    當你開始給你的AirPods充電時。

  • that case's LED lights will glow either orange,

    該箱子的LED燈將發出橙色的光。

  • meaning it needs more charging,

    這意味著它需要更多充電。

  • or green, meaning it's fully charged.

    或綠色,意味著它已充滿電。

  • You can check how much battery your AirPods and case have

    你可以檢查你的AirPods和外殼有多少電池

  • by opening the case near your iPhone

    通過打開你的iPhone附近的箱子

  • or by using the battery widget.

    或通過使用電池小部件。

  • Check out our video on how to enable the battery widget

    看看我們關於如何啟用電池小工具的視頻

  • if you don't already have it.

    如果你還沒有的話。

  • The link is in the description.

    鏈接在描述中。

  • Unlike other AirPod models,

    與其他AirPod型號不同。

  • the AirPod Pros have plastic tips

    AirPod Pros有塑膠頭

  • that are supposed to bend to the shape of your ears.

    這應該是根據你的耳朵形狀來彎曲的。

  • But everyone has slightly different ears,

    但每個人的耳朵都略有不同。

  • and the default tips won't always fit.

    而默認的提示並不總是適合。

  • That's why every new pair of AirPod Pros

    這就是為什麼每一對新的AirPod Pros

  • come with three sets of plastic ear tips,

    附帶三套塑膠耳塞。

  • each one a different size.

    每個人都有不同的尺寸。

  • You can remove your AirPod's current tips

    你可以刪除你的AirPod的當前提示

  • by pinching them firmly

    緊緊捏住它們

  • and pulling them off the earbuds.

    並把它們從耳塞上拉下來。

  • It takes some force, but don't worry,

    這需要一些力量,但不要擔心。

  • they'll pop off without issue.

    它們會毫無問題地彈出。

  • To attach new ear tips,

    要安裝新的耳塞。

  • line up the oval on the edge of the tip

    在尖端的邊緣排成橢圓形

  • with the oval on the AirPod speaker,

    與AirPod揚聲器上的橢圓形相呼應。

  • then press the tip into place.

    然後將尖端壓入到位。

  • If you're not sure what size ear tip to use,

    如果你不確定要使用什麼尺寸的耳尖。

  • take the ear tip fit test.

    進行耳尖貼合度測試。

  • With your AirPods on and connected to your phone,

    戴上你的AirPods並與你的手機連接。

  • open the settings app.

    打開設置應用程序。

  • Click "Bluetooth" and click the i next to your AirPods.

    點擊 "藍牙 "並點擊你的AirPods旁邊的i。

  • Then click "Ear Tip Fit Test."

    然後點擊 "耳尖匹配測試"。

  • You'll be led through a series of short exercises

    你將被引導完成一系列的簡短練習

  • that test how well the AirPods fit in your ear.

    測試AirPods在你耳朵裡的適應程度。

  • At the end of the test,

    在測試結束後。

  • it'll tell you if your current ear tips make a good seal

    它可以告訴你,你目前的耳塞是否密封良好。

  • or if you need a different size.

    或者如果你需要一個不同的尺寸。

Almost all of your AirPod Pro's basic controls

你的AirPod Pro幾乎所有的基本控制功能

字幕與單字
由 AI 自動生成

單字即點即查 點擊單字可以查詢單字解釋

B1 中級 中文 點擊 耳塞 音頻 噪音 應用 程序

7個基本的AirPods Pro控制 (7 Basic AirPods Pro Controls)

  • 3 0
    林宜悉 發佈於 2022 年 05 月 19 日
影片單字