Placeholder Image

字幕列表 影片播放

  • [classy computer repair music]

  • Greetings and welcome to an LGR thing

  • about this lovely thing [chuckles at impending tasks]

  • It needs a little work.

  • Hopefully we'll be addressing this stuff.

  • This is the IBM Personal Computer XT Model 286,

  • otherwise known as the 5162.

  • I don't know if it's working, I've had it for a while now

  • I need to see if it works.

  • And it needs some restoration, that much is clear,

  • whether or not it's functional.

  • Hopefully this will be pretty interesting.

  • I've talked about IBM PCs and XTs and ATs

  • and different 286s but never a PC XT 286.

  • In case you're not aware, this is a system

  • that IBM introduced in late 1986 as a kind of

  • not really a stopgap, it -- so this is the weird thing.

  • It's a 286, and it came out after the IBM AT did.

  • And it was only on the market for a year or two

  • right before the IBM PS/2 line came around

  • and the IBM AT was discontinued.

  • So I've always wanted one,

  • but they are incredibly rare, apparently.

  • They're certainly valuable.

  • The value keeps shooting up over the past

  • however many years I had been looking for one, but yeah.

  • It's a lot like an IBM AT, except it's in a PC XT case.

  • And in fact, in some situations that apparently

  • could outperform the PC AT 286

  • at least the earlier ones.

  • So I might like to try and put that to the test

  • if we can get one of these working.

  • And yes, I did say one of these because...

  • I have two of them. Augh. [laughing]

  • So, thanks to Jonathan and Wesley for sending these

  • in my way a good while ago now.

  • I've just kind of had them sitting here

  • waiting to be restored.

  • I just, who knows!

  • Who knows what's going on inside at all.

  • In fact, let me turn these around.

  • All right, so as you can see this one internally,

  • at least from the rust and the battery leakage going on,

  • that is in a little rougher shape,

  • they both need some serious cleaning up though,

  • at the very least.

  • And again, functionally, there's no telling.

  • So that's what I'm going to try to do here today

  • is try to get them working,

  • or at the very least get one of them working.

  • Maybe sort of Frankenstein the two together if need be.

  • Ideally, I'd like to get them both working, of course,

  • because they are rare machines.

  • So yeah, and we'll just, we'll see.

  • IBM 5162, and they both have the badge.

  • In fact, this one still has the plastic on it, that's nice.

  • They were manufactured in Armonk, New York,

  • at least these were. A lot of them were actually

  • manufactured in Scotland, my IBM AT over there was.

  • It's got a power supply in here that is a little beefier

  • than were some of the earlier PCs because support hard disks

  • and more expansion cards and such.

  • And then these battery bays, these are interesting in fact,

  • let me just go and open them up.

  • This one I'm especially worried about 'cause it looks like

  • it has leaked and ruined a bunch of things.

  • I believe these are six volt lithium of some kind,

  • probably the sa-- yeah.

  • It's like the same ones that you get on a PS/2.

  • The IBM PS/2 has used the exact same type for

  • the battery backup of the settings

  • and the clock, and all that kind of stuff.

  • Now for the top one.

  • Well, that screw does not wanna budge, it's moving.

  • Yikes.

  • Well, we'll just put that back

  • and we'll get back to that later.

  • Anyway, yes, so we have the I/O section over here

  • with eight expansion cards each, or slots for the cards.

  • I think they're mostly 16 bit, actually maybe 8 bit.

  • I don't exactly remember right now, but yeah.

  • There's also the keyboard connector,

  • which I don't think is restricted

  • to the PC XT style of keyboard.

  • I think you can plug in like a five pin AT keyboard

  • here and it'll work just fine.

  • Like I said, it's just a strange hybrid of the AT and XT.

  • But yeah, the actual cards that are installed, I don't know.

  • I mean, obviously, we've got parallel and serial cards,

  • and there's a modem of some kind here.

  • This is probably a hard disk card or maybe a controller,

  • floppy, whatever.

  • Got a game port, it looks like down here,

  • and probably a floppy and hard disk controller card

  • from one of these.

  • This looks like CGA 'cause it's got the nine pin video

  • right there, and a d-sub connector and then composite.

  • And then up here it looks like a VGA connector.

  • So we got 15 pins right there.

  • So it'll be intriguing to see what's inside and of course,

  • what survived with all this nastiness going on.

  • But lets open them up, and see what we find.

  • [jazz music fades out]

  • Alrighty!

  • We're gonna start off with

  • the nastier of the two,

  • the one with the rust and battery leakage around back.

  • Neither one of these systems have all the screws around back

  • they're supposed to be five, they each only have three.

  • It's a little bent.

  • There we go.

  • Let's see what the damage is.

  • It's not great, but could be worse honestly.

  • Actually the motherboard itself

  • doesn't look terribly damaged.

  • The battery did however, leak onto the keyboard connector

  • and into the power cable connectors from the power supply.

  • The other thing I'm concerned about

  • are the tantalum capacitors,

  • see these little round yellow dudes in there?

  • They tend to... blow up. [nervous chuckle]

  • I'm just gonna be careful

  • whenever we do end up powering it on.

  • I mean, obviously, the ideal thing would be

  • to just replace them immediately,

  • but I don't have any replacements right now.

  • Yeah, they're one of those things where

  • you just, you can't tell if they're gonna be okay

  • or not just by looking at them.

  • Anyway, let's check out the cards

  • and things that are in here

  • since we can actually see precisely what we got now.

  • So first up, we do have quite a beefy hard drive,

  • not in capacity obviously, it's only 20 Megs

  • but pretty standard for AT class machines,

  • a type two, classic.

  • We have two different disk drives.

  • Looks like the top one is the standard 1.2 meg

  • five and a quarter inch

  • that they came with, by default, with the one below it...

  • Forgot to look at these earlier.

  • But yeah, you see this one with a little asterisk.

  • That usually means -- in fact I think it does for sure,

  • it means it is a 360K. In terms of the expansion cards,

  • in this one we've got all these are 16 bit ones here

  • and there's one eight bit one.

  • Looks like that is the video card

  • but, this is the pretty much standard

  • IBM floppy and hard disk controller here.

  • We have a serial and parallel card

  • of some kind installed here.

  • This is a modem, and we have a Hardcard.

  • Plus Hardcard XL 2105 it looks like,

  • I've never run across one of those that actually works

  • but that would be nice.

  • And then of course lastly is the graphics

  • and we'll see what that is.

  • Let me just take some of these out,

  • I wanna see what they are.

  • Alright, so here is the modem.

  • Practical Peripherals.

  • Made in USA, copyright 1991.

  • I like the speaker that has on there.

  • Probably like a 2400 bps, I don't know.

  • Yeah, check out that Plus Development Corporation Hardcard.

  • I've got, I think three of these now and none of them work.

  • Look at this little Cirrus Logic VGA card,

  • Got a CL-GD5401 chipset on there.

  • I'm not too familiar with that one,

  • but seems like a basic little card.

  • Bet it would do the job just fine.

  • Let's open up the other one, see what's inside that.

  • Oh, this one just has the 1.2 meg.

  • Let's see here we've got the hard disk, which is,

  • I don't know, it doesn't have any markings.

  • It's definitely a Seagate, ah! It is a ST-4038, wonderful.

  • As for the cards, yeah, that is definitely CGA card there.

  • One of the older ones with the amber brown kind of PCB.

  • The hard disk and floppy disk controller

  • looks like it's probably the same one as the other one.

  • In fact, this too the serial parallel seems to be the same.

  • This on the other hand, there's not much going on there.

  • It is just a straight up Analog Input Card as it puts it,

  • just a 15 pin game port, for plugging in joysticks and such,

  • no branding or anything.

  • A lot of these were made by Kraft.

  • This is just a generic looking part.

  • Let's check out the CGA card.

  • Yeah, I really like the way that these look.

  • I've got a couple others of these, IBM ones man.

  • They looked really cool, look at that brown dark orange

  • Copyright 1981, I believe I'm gonna use that for testing

  • the display and such just 'cause I have an IBM 5154

  • enhanced color display over here that'll work for CGA

  • and EGA so that'll be nice.

  • It is honestly looking pretty clean, all things considered.

  • I mean, it still needs to get cleaning but you know,

  • considering it hasn't been cleaned yet that's not bad

  • at the 286 down there and we have some...

  • This is gonna be a thing I don't know.

  • I've heard the RAM and these can be a little iffy

  • 'cause I think you've got 128k

  • of just these little socketed doohickeys down here

  • and then you have these two modules that add another 512k

  • taking it to a total of 640k of system memory.

  • You take out these cards here

  • because we just really only need are the graphics

  • and the floppy and hard disk controller.

  • No sense and mucking up the troubleshooting period.

  • Alright if you're worried about my desktop surface here,

  • Don't be, I always get comments about that.

  • "Oh, you're sliding around scratching it up!"

  • It's just a vinyl laminate.

  • I'm gonna go ahead and put a new battery in here.

  • Hopefully if it boots up we'll be able to,

  • get into the software and save some settings

  • and whatnot with that though.

  • Can I get this plugged in

  • and just see what happens.

  • [chill reassembly beats]

  • After I've plugged in, let's power it on or try to.

  • [computer loudly whirs to life]

  • Well that's [laughing] about as good as I can hope.

  • 640K ram, okay.

  • We got the 161 error

  • which just means we need to run the setup program.

  • Otherwise we can run basic, looks like it's running

  • in 40 column mode as well, intriguingly.

  • Hey, so we're gonna need a DOS,

  • we're gonna go with version 3.3.

  • Assuming the floppy drive works,

  • I don't have it cleaned or anything, really just want to see

  • if this was worth cleaning first.

  • Looks like it probably will be, it's trying to load.

  • All right.

  • Gonna give GSETUP a shot here.

  • This is one of those computers

  • where you can't just enter the BIOS on its own.

  • You have to have some software.

  • It does not like the 40 column mode.

  • Okay, well, let's try to put it on color 80 columns.

  • Okay rebooting, that looks better already.

  • We're able to actually see what we're doing now.

  • So let's see, get the time going.

  • Hey Flerblenerp, what time is it?

  • - [Flerblenerp] It's 11:08

  • - Oh jeez.

  • [computer beeping]

  • What day is it?

  • - [Flerblenerp] It's Sunday, April 26 2020.

  • - I honestly didn't know.

  • Yay, Y2K compliance.

  • So disk drive A, double sided high density 1.2.

  • I have 640K base memory.

  • As for the hard disk type, this is an ST-4038.

  • I don't know what type that is.

  • I didn't see it printed on the actual hard drive

  • but should be a type 20.

  • Interesting, the other one was a type two.

  • So this one's 32 megs instead of 21, ooh.

  • Cool. Should be it.

  • It's got just this red LED that's just been steady on here

  • for a bit as it's booting.

  • We'll see if it'll try to load anything on the drive

  • or if there's even anything on there.

  • I don't know.

  • Aha, 1782 disk controller failure, indeed.

  • Yeah, let's see here.

  • We know that the controller card itself

  • is like properly seated and whatnot

  • 'cause the floppy drive is working from the same card.

  • I'll just open it up and see what we can find.

  • [Utopia Windows startup sound]

  • Ayy, got some stuff going!

  • So I've been messing around with this for half an hour

  • or something.

  • I swapped the cables, and tried some other settings

  • and moved around the positions

  • on the card and whatnot, nothing was working.

  • However, I decided to try.

  • This is the one that wasn't there, the hard disk

  • and floppy disk controller.

  • The other card from the other system

  • is identical to this one, which means it should in theory,

  • be able to read this MFM drive and check it out.

  • It booted first time with the card from the rust bucket.

  • So we've got DOS version 5, apparently,

  • is installed on this machine's hard disk.

  • So dude! Got some DOS things in the DOS directory.

  • But this is pretty cool.

  • Looks like Windows 386 is installed.

  • It was installed.

  • [laughing]

  • Apparently, and now it's not.

  • [backwards Utopia sound plays]

  • Yeah, other than a very base install of DOS 5,

  • potentially from 1991, If the date is to be believed,

  • wow, there's not much going on here.

  • But still, it's working.

  • And that in of itself is pretty fantastic.

  • Yeah, let's go ahead and... get this cleaned up.

  • Maybe get the faceplate put back on there and yeah,

  • see if I can maybe get the 360k disk drive

  • from that other system and put it into this one.

  • But as we're doing that, I may as well address

  • the rusty nasty situation 'cause it's pretty gross.

  • First thing on this one,

  • I wanna get this battery disconnected at the very least.

  • Maybe take the whole compartment out of there if I can.

  • It looks like it would come off

  • but it's just so nastily in place now.

  • [exasperated chuckle]

  • Those leads just snapped right off of there.

  • There we go.

  • Again, thankfully not as bad as it initially looked

  • but gunk caked down in there.

  • This whole thing is gonna have to come apart.

  • I do find it intriguing there's like a full MFM drive

  • and a Hardcard in here.

  • Wonder if one's broken or if they just wanted both.

  • This is the one that was closest to the damage.

  • Actually looks okay, except for that around back.

  • So underneath here you have some of these screws

  • for disconnecting the floppy drives from their cage.

  • That screw out of there should be loose, yep.

  • It's still catching on something,

  • and look at that beast.

  • Comes out like that, we have this crazy assembly

  • of double floppy disks.

  • Well there was that one screw there but the rest of it

  • seems to be held into clips.

  • Actually no, there's one screw there too

  • that is rusted in place.

  • And this is on top of it, that is annoying.

  • I tried getting the whole thing out of there earlier

  • but it's not budging.

  • It's just so stuck in place man.

  • Yeah, there's a part of you normally squeeze

  • to get it out of there but...

  • Wow.

  • There we go.

  • Look at that disgusting thing.

  • That battery is never coming out of there.

  • Man that is not easy to get out of there

  • even at the best of times.

  • And there we have it.

  • XT 286 motherboard in dire need

  • of cleaning, and here's the worst of it.

  • It at least didn't eat through the entire board.

  • Those two screws there, are so rusted together.

  • I can't even get like the screwdriver to go in.

  • See these metal bits, slides in place,

  • holding it to the back

  • so you can't even like pull it forward.

  • [Dremel buzzing, music fades out]

  • Okay, so here is the floppy disk drive assembly

  • from the rust bucket.

  • And here's the 1.2 meg assembly

  • from the one we're trying to fix up.

  • But yeah, for this one, the 360k drive that I'm going to be

  • hopefully adding to this.

  • Hopefully it works.

  • I just went ahead and took apart the assembly

  • with the other drives at 1.2 meg that is untested.

  • Just gonna take that out of there

  • and cleaned up this 360k drive

  • a good bit. Blew some compressed air through there

  • and just dusting away things with an anti-static brush here

  • and lubed up the rails on the bottom so the head assembly

  • can move freely once again and then just wiped down

  • everything I could reach with some alcohol wipes and swabs

  • and cleaned it up to make it look, eh you know,

  • a little bit better than it was.

  • So yeah, just going to put this drive on top of here

  • while after I clean this really quick.

  • And I guess that means

  • we won't be needing this bottom part here.

  • Look at that.

  • It's got like this pretty substantial drive placeholder,

  • not just a plastic faceplate on front.

  • [synth music plays]

  • This entire assembly was not even attached inside.

  • It was just sort of jammed into place, I found.

  • Yeah, this one actually needs even more lube

  • than the other one did.

  • Oh yeah.

  • Much better.

  • you know I meant to test

  • the 360k drive before I installed it in this cage

  • but I'm going for broke I guess.

  • All right, let's get plugged in and configured

  • and see if it works.

  • [clean synth music plays]

  • Such a cramped fit with all these cables back here.

  • [floppy drives buzzing]

  • [computer beeping]

  • Alrighty!

  • So floppy disk B should be...

  • Hehe, "bee."

  • 360K, five and a quarter inch.

  • [drives buzzing]

  • [computer beeping]

  • It's making weird noises.

  • But it's working.

  • All right.

  • I don't know what that sound is man,

  • maybe it was just the head repositioning itself,

  • but that disk works.

  • Now let me see I've got something else here.

  • Yeah, got Planet X3 they're loading right up.

  • [computer beeping]

  • Dude. Yes.

  • I'm so happy that this is coming together. [laughing]

  • Okay. "Have a nice DOS!"

  • I will, David!

  • Well, let's go ahead and get MS DOS 5 installed on here.

  • And yeah, I'm going to install DOS 5

  • instead of the one that originally came with from IBM,

  • which was DOS 3.2, because I don't have that exact version

  • on hand. I was thinking about putting 3.3 on here

  • because you know, it's a great version

  • to have on one of these.

  • I posted a poll on the LGR Twitter and I was like,

  • which one should I install?

  • You said DOS 5, so we're gonna do it.

  • It's what was on here from the previous owner.

  • So it seems like it's almost respecting it somehow.

  • I don't know, let's install DOS.

  • Yay, DOS.

  • Yep, looks good to me.

  • [floppy drive reading]

  • [disk being removed, swapped]

  • Ohh, an error occurred on Drive C.

  • Yeah, okay, well.

  • Okay, I'm gonna go ahead and run a format.

  • just restart everything on our C drive.

  • [hard drive clunking]

  • Uh-oh!

  • [concerning hard disk noises]

  • Oh, no is it dying?

  • Definitely heard the head knocking around there.

  • All right, well, it's doing it this time.

  • Ah, maybe it'll be better after a format

  • but we still have that other drive to try.

  • In fact, I wanted to try it out anyway.

  • So if this doesn't work or if it's a little iffy,

  • I'll try the other hard disk.

  • Well, it completed the format.

  • I'm not entirely convinced,

  • but we'll try installing DOS 5, see how it goes.

  • Dang, error occurred while reading or writing.

  • Doesn't even want to start up at this point.

  • [angry PC beeping]

  • 1780 disk failure.

  • I'm gonna plug in the other one and see what happens

  • and [chuckles] yeah,

  • Hopefully I can still get the other one working

  • but a low level format can take a long time.

  • I'ma give this a shot right now.

  • [clunky hard disk noises]

  • That doesn't sound good either. And before we write it off

  • though, just gonna change the drive to the correct type

  • in the BIOS.

  • [confimation beep]

  • Whoa, what do you know?

  • Listen to this thing

  • Thing is just chirping away

  • like the most 80s-sounding hard disk I've ever heard.

  • Some kind of a hard disk checking utility

  • is going at the moment.

  • I don't know what it's doing.

  • It's taking a while.

  • Wow!

  • Okay, there's a lot more on this one

  • than the other one.

  • I see WordPerfect, prodigy.bat

  • I wonder if there's some Prodigy files I can get off of here?

  • Running DOS 6.0.

  • Wow that did not sound good when I first started up

  • but got the right drive type selected

  • and it seems to be doing okay.

  • [drive softly chirping as it reads]

  • The sounds this thing makes are incredible.

  • 51,200 bytes in bad sectors but overall not too bad.

  • So here's the thing that popped up at the beginning.

  • "Notice to all users, do not alter any format"

  • Nyah-nuh-nah.

  • And now I wonder what in the world

  • this thing was, heh,

  • connected to and running back in the day.

  • It doesn't look like Prodigy's installed.

  • No there's nothing, that sucks.

  • Oh, it looks like we got CrossTalk here.

  • So yeah, somebody was talking to some other computers.

  • I'm assuming this was the modem that was in here.

  • So Hayes 2400 compatible, make sense.

  • I see it is also trying to load a Logitech mouse

  • and that Hardcard so maybe,

  • maybe the Hardcard actually works.

  • That would be pretty wild.

  • That'd be the first time I've ever seen

  • one of those working.

  • Don't wanna get my hopes up though.

  • Yeah, considering this drive is working

  • as-is I don't even know if I wanna reformat it

  • and redo things like I was planning on.

  • I kinda just wanna leave it.

  • And maybe plug in like a compact flash thing

  • and just get all the files copied

  • over to that and backed up and yeah.

  • [laughing]

  • This autoexec... is a mess.

  • I mean, look at this path list!

  • Looks like there was some COBOL work being done on here.

  • [laughing]

  • You never know what kind of history you're gonna find

  • on these old hard disks.

  • Man, that's pretty nuts.

  • I was hoping we find even more in that 31 meg one,

  • but there was like nothing on there.

  • And then this 20 meg one

  • that I didn't have much hope for.

  • It's full of stuff.

  • I'm just gonna leave it as-is for now.

  • Hopefully, it'll continue working and I can get

  • that other hard disk working at some point.

  • But yeah, for this one, I'm just gonna leave it as-is.

  • All right, so that's cool.

  • Let's get it cleaned up now and all presentable.

  • Yeah, this is coming along!

  • Okay, let's get this case washed.

  • [sudsy jazz music]

  • See how the top part of this case

  • is actually kind of more gross than the other one,

  • which was the rusty one.

  • So I don't know which one I'm gonna end up using in the end.

  • But yeah, I'll clean them both.

  • Also notice that both cases actually still have

  • a little plastic protective bit

  • on the front of the badge there.

  • It's turning a little yellow.

  • So many scuffs and marks and weird

  • like, mottled grossness.

  • Yeah, that'll definitely help some.

  • Don't wanna rub the entire coating off though.

  • Just bits like this that are straight up gouged in there, tsk.

  • It's a definite improvement.

  • Not bad.

  • So here is the rust bucket case

  • and overall I think it's actually in better shape

  • underneath some of this grime, but. Whatever that is?

  • A little bit of rust back there and of course,

  • some seriously gross sticker residue.

  • I got one of these adhesive peeler thingies

  • Yeah, this will do the job.

  • It's just gonna take a while so I'm gonna do that.

  • [sighs] Okay, that was just tiring but yeah, that worked.

  • It's just sticky and gross now,

  • so some of these goo removing wipes

  • should do the job pretty quickly.

  • Lifting that junk right off.

  • As for what this is, I don't know where it's kind of oily.

  • Might be oil. [chuckles]

  • It smells like oil.

  • Yeah dish soap, doing a good job cleaning that up.

  • As expected, this is looking much better than the other one.

  • Check it out, that looks basically new at this point.

  • A couple of little, you know, gouges

  • and things here and there, but like, the top cleaned up much nicer.

  • I think the front did too.

  • It's still just got this

  • little bit of sticker residue here.

  • I'm gonna use another little bit of this goo crap

  • and see if I can get rid of that,

  • rinse them off and let them dry.

  • [running water, jazz music fades out]

  • Okay, let's get the serial card installed back in here.

  • [upbeat rebuilding music]

  • Still got two blank areas

  • since nothing's installed over here.

  • So, I got a couple of these brand new I/O plates.

  • So this little plastic thing goes around the floppy drives,

  • haven't cleaned that yet

  • I like the way it snapped.

  • I gotta get the hard disk put in place

  • but the screws that were in here were really gross.

  • And they didn't match. I'ma get some new ones.

  • Much better.

  • I can't forget the chunky power switch.

  • Gotta clean that up.

  • Overall it does look like somebody at least wiped it down

  • at some point before me 'cause it's not that dusty.

  • Yeah, it's looking pretty good.

  • All right time for the case topper

  • from that rusty machine.

  • I have bent it back into shape.

  • Hopefully it'll be a little easier going on

  • and it was coming off.

  • Oh yeah.

  • That's like perfect, perfect, perfect.

  • Wow. Augh.

  • This cleaned up... so nicely.

  • And it's all working, at least right now.

  • [cautious chuckling]

  • Oh yeah, let's finish setting it up and turn it on

  • one more time before we finish things up here.

  • Yes, I have all five screws now.

  • Of course we can't forget about the little screws

  • that go in this hole on the bottom

  • to keep the drives in place.

  • And these little things have to go all the way...

  • [clumsy clunking around]

  • Man, that is just irritating.

  • I also have some replacement cork feet.

  • I'm going to swap out here.

  • You can see it's actually missing one

  • and these others have slid out of place.

  • I'm gonna remove them entirely

  • and replace them with brand new ones I've ordered.

  • But they haven't arrived so I'm not gonna do it right now.

  • Check this out, I got a 5153.

  • Now that is a lovely pair: 5170 AT,

  • 5162 XT.

  • This really highlights one of the disadvantages

  • of the 5162.

  • Despite its zero wait state memory going on

  • that made it a little bit faster than the six megahertz AT?

  • You can see it's actually physically shorter,

  • which meant that some of the newer cards that were designed

  • for the AT class computers would not physically fit

  • inside of the 5162.

  • All the cards I have do but there are some that are taller

  • and when you go with like a 16 bit ISA bus

  • you just can't use them on a 5162.

  • Finally, time to power this thing on,

  • now that it's all set up,

  • complete, looking amazing.

  • Here goes!

  • [computer triumphantly whirs to life]

  • [whispering] Ah, yes.

  • Yes, yes, yes, yes.

  • [computer beeps, hard drive chirping]

  • [chuckles] Crazy hard drive.

  • [laughing]

  • Oh look at this!

  • So yeah there we are

  • we've got the PC XT Model 286 restored, working beautifully

  • for the moment until something happens here.

  • I'll do my best to get all the data

  • off of this and backed up and of course

  • I do still want to get the other 5162 working

  • if I can. At the moment, the state of

  • it isn't particularly great.

  • I mean, I cleaned it up but yeah,

  • I don't know if the motherboard works.

  • Power supply is in terrible shape, in fact it's still

  • inside of there. I cannot get it out.

  • I need to get some other

  • kind of bit or something

  • for my Dremel or drill or whatever.

  • I got to get those screws

  • because they are stuck rusted in place.

  • Anyway, that's another project

  • for who knows when, but this is working.

  • I am so happy that it's working.

  • It's been four days working on this thing.

  • So yeah, let's try some CD-MAN on here

  • because I feel like it

  • I'm just gonna run straight off the disk, CD-MAN.

  • This is different, "install CD-MAN to the C drive"

  • "the D drive," I've never actually tried this before,

  • so I wasn't expecting that, hmm.

  • You know what, I have an idea.

  • I've got two IBMs so why not take the opportunity

  • to start both up at the same time.

  • [PCs power on simultaneously]

  • Wait a second. CD-MAN is an EGA game isn't it?

  • Oh what am I -- What am I even thinking? It won't run

  • on the 5162 because I have a CGA card.

  • Hey Wheel of Fortune though, that'll be a thing.

  • [PC speaker WoF theme plays]

  • Okay, you can stop.

  • Well, if anything this demonstrates the difference,

  • I guess between loading the floppy disk and hard disk.

  • Obviously. But also the fact that the PC speakers

  • And this XT 286 over here is a lot quieter

  • than the one in the AT. Or at least in the position

  • it's in, perhaps. You've got the speaker right here like near.

  • That one's like facing the, you know, whatever.

  • Anyway, different things. [typing] LGR, LGR.

  • That load time.

  • There we go. Let's see what kind of differences

  • we got here in terms of -- both are 'person' puzzles

  • in round one.

  • It's so weird hearing this in stereo in this room.

  • I'm gonna search 'L' or guess.

  • Oh, no Ls here, but there's an L over there.

  • What is this garbage?

  • It's hard to get the colors to show up correctly.

  • [chuckles] Oh!

  • I've never actually seen these two.

  • Seeing these two side by side is pretty nuts.

  • Actually, I like it.

  • All right, well anyway,

  • Wheel of Fortune, can we not quit?

  • No, we can't I guess.

  • So uh, that's okay.

  • Alrighty, well that is it for this video,

  • this particular project anyway.

  • Like I said, still want to do something with that other 5162

  • But yeah, for now, yeah.

  • This is just amusing to me.

  • I hope you enjoyed seeing this come together.

  • Maybe it encourages you to restore an IBM or some

  • other computer project you've been putting off

  • or whatever.

  • If you enjoyed watching this, that's good enough for me

  • if you want more of this kind of thing

  • and check out some of my other restoration and fixer up

  • projects I've done in the past and whatever else

  • I happen to post here every week on LGR.

  • And as always, thank you very much for watching.

[classy computer repair music]

字幕與單字

單字即點即查 點擊單字可以查詢單字解釋

B1 中級

LGR - 恢復1986年的IBM PC XT 286。 (LGR - Restoring an IBM PC XT 286 from 1986)

  • 6 0
    林宜悉 發佈於 2021 年 01 月 14 日
影片單字