This poor guy just went through one of my smartphone durability tests.

這個可憐的小傢伙剛剛經歷過我 智慧型手機的耐久性測試。

And while most phones survive... this one didn't.

雖然大多數手機安然度過了……但他沒有。

His death is not in vain though as this autopsy will show how to repair most everything inside

他的死是沒有白費，因為這將展示如何修復大多數在裡面的東西

the device, AND how the pressure sensors for HTC touch sense work since that feature is

以及壓力傳感器是如何用於 HTC的觸摸感應工作，因為該功能是

unique to this phone.

這款手機的特色。

And maybe we'll see if a transparent back glass panel is possible at the end of the

在影片結束的時候，也許我們會看到一個透明的背玻璃面板

video.

讓我們開始吧。

Lets get started.

（介紹）

(Intro)

通常我會先關掉手機，但…

Normally I would turn off my phone first but...

我關不掉。

I cant.

長按HOME鍵也沒用。

Long pressing the home button doesn't work at this point either.

由於背面玻璃不像三星是嵌入邊框

Since the back glass is not embedded into the frame like on a Samsung it is a relatively

簡單的去除。

simple process to remove.

只要你的工具不要插太裡面。

As long as you don't slice too far into the device with your tools.

因為在加熱過後的玻璃實在燙得完全無法接觸， 我慢慢插入我的金屬工具

After the glass is just barely too hot to touch comfortably, Ill slip my thin metal

在鋁和玻璃之間， 漫漫的延著邊沿

pry-tool between the aluminum and the glass, and work my way around the edges.

在玻璃起來後，我會插入我的綠色撬棒 在面板下以防止其重新

After the glass is up, I'll Stick my green prytool under the panel to keep it from re-adhering

黏回去。

back to the frame again.

繼續加熱手機 切開黑色粘接劑。

And continue the cycle of heating the phone and slicing through the black adhesive.

這黑色的東西就是讓手機有抗水性的物質

The black stuff is what helps keep the phone water resistant.

無庸置疑的，經過任何維修後， 別相信你的手機能碰水了

So definitely don't trust your phone around water anymore after you've done any repairs.

在頂部的黑色塑料板有5個小螺絲釘， 我要去把它們轉起來

On the top black plastic panel there are 5 little screws, I'm going to spice things up

這段影片的一些箭頭 是我從graphicstock下載的，他們正在做

a little during this video with some arrows I downloaded from graphicstock, they are doing

一個 #Creator2Creator 挑戰，因為影片 是我做的，我是動畫的重要組成部分

a #Creator2Creator challenge And since video is a big part of what I do, I'm animating

其中.png圖像我從他們的網站拿的。

the .PNG images I got from their website.

在影片的完整資訊裡有一個七天免費試用正等著你。

There is a free 7 day trial waiting for you in the video description.

只有現在面板拆掉後，我可以斷開電池的連結來關機。

Only now after that panel is gone can i turn off the phone by disconnecting the battery.

電池沒有拉環，但 有一部分粘合劑是相當好拆。

There are no pull tabs on the battery, but at least the adhesive is pretty forgiving.

讓你不費吹灰之力便可以卸下電池。

And will allow the battery to pop out of the frame without too much effort.

在電池拆掉後， 我們的第一印象 就在機身兩側上的那些壓力傳感器帶的

Under the battery we get our first glimpse of those pressure sensor ribbons on both sides

我特別小心不刺穿任何東西。

of the phone.

電池是3000毫安培小時的。

I'm taking special care not to puncture anything.

我會在這些東西可以拿到時 盡快在影片完整資訊中附上連結。

The battery is a 3000 Mah.

在主機板右下角上有一個螺絲 。

Ill link these in the video description as soon as they become available.

我把他們設置到一邊並確保 所有螺絲都有放好。

There is one screw holding on the motherboard in the bottom right hand corner.

我會拆掉右壓力傳感器帶， ，隨著

Ill set that off to the side making sure to all the screws organized.

沿著底部的其他三個帶狀電纜

Ill pop the right pressure sensor ribbon off, it can unsnap like a little lego, Along with

和左壓力傳感器，最後的 電源和音量按鈕也可以像掀開

the other three ribbon cables along the bottom of the board.

像是樂高的連接。

And the left pressure sensor, and lastly the power and volume button can also unsnap like

有兩根黑色和白色的訊號天線在主機板右側，

lego connections.

和.…那麼…如果由於某種原因，你的SIM卡卡托仍安裝著，你可以移除

There are two signal wires, the black and white one, on the right side of the motherboard,

它。

and... then... if for some reason your sim card trey is still installed, you can remove

它有圍繞著橡膠環 以避免保持水進來。

it.

現在可以放心地拆主機板了。

It has the same rubber ring around the tip to help keep water out.

前後鏡頭很容易拆的， 真的很高興，HTC終於改變

And the mother board is free to pull from the phone.

他們的手機內部佈線。

The front and rear cameras snap off easy enough, Its really nice that HTC has finally organized

如果你看我的HTC 10拆機，所有不同 無組織的聯繫讓修理

their cabling inside the phone.

這款手機成為一場噩夢。

If you watch my HTC 10 teardown, All the different unorganized connections made repairing that

左邊的小傢伙是一個1600萬畫素的 前置鏡頭。

phone a nightmare.

和主後置鏡頭擁有1200萬畫素 傳感器與光學圖像穩定器。

This little guy on the left is a 16 megapixel front facing camera.

HTC今年選擇了不在前面的鏡頭加上OIS。

And the main rear camera has a 12 megapixel sensor with optical image stabilization.

去年的HTC 10特別在兩個鏡頭上都有OIS。

HTC opted to not include the OIS on the front facing camera this year.

希望他們明年會加回去。

Last years HTC 10 was unique in having OIS on both cameras.

OIS對錄影很有幫助..

Hopefully they go back to that with next years phone.

HTC U11的​​底部有7個螺釘。

OIS is great for video..

繞中心孔的粘合劑是幫麥克風防水

Down here at the bottom of the HTC U11 are 7 more screws.

這款手機採用了多方向錄音。

The adhesive around the center hole is the water proofing for one of the 4 microphones

除去頂部塑料護罩後，還有一個 螺絲，最後就可拆掉外放喇叭

this phone uses for its multi directional audio recording.

它上面具有附著黑訊號天線 ，有趣的是它具有

Removing that top plastic shield exposes one more screw, and finally the loud speaker can

耐水棉內置於揚聲器上面。

be removed.

跟三星和iPhone設備的防水 目是分開放的

It still has the black signal wire attached to it, and interestingly enough it has the

所以這滿有趣的。

water resistant mesh screen built into the speaker itself.

充電口擁有4個小樂高樣的排線，這些

With Samsung and iPhone devices the waterproofing mesh is a separate unit usually resting on

是用於前電容按鈕。

the frame of the phone.

還有一條連接主機板的排線。

So that's interesting.

當我拆充電口 ，有一堆黏合劑在上面

The charging port has 4 of the little lego style ribbon connections on the top, These

，這肯定有助於 與耐水性。

are for the front capacitive buttons.

小金屬圈是振動馬達。

And for the extension ribbon to the mother board.

橡膠墊圈圍繞USB C端口，以保持密封緊

As I was removing the charging port from the board, there was a ton of adhesive holding

當所有的旋入和固定。

it into the frame, which definitely helps with the water resistance.

螢幕本身是可以更換的，使用 大量的熱和耐心

The little metal circle thing you see is the vibrator motor.

就像我們對背面玻璃面板做的。

There is also a clear rubber washer that rests around the USB C port to keep the seal tight

它絕對活不下來， 也不像Google Pixel一樣好換。

when it is all screwed in and held in place.

但它仍然是可能換的。

The screen itself is replaceable, using a lot of heat and patience it can be removed

我會在完整資訊裡給一個可以更換螢幕的連結。

just like we did with the back glass panel.

當它們可以取得時我會為我自己買一個。

It Definitely wont survive the process and is not as easy to replace as the Google Pixel.

而現在來講這款手機完全獨特的部分 …

But it is still possible.

沒有一個其他的手機製造商嘗試過。

Ill toss a link in the description for replacement screens.

內置擠壓傳感器於鋁框上。

Ill have to get one for myself as soon as they are available.

這裡的理論是，手機的金屬邊 可以被擠壓，或彎曲，

And now for the part that is completely unique to this phone...

然後它可以作為一個觸發器或按鈕在不同得app或功能上，像攝像頭。

There is no phone manufacture that has ever attempted before.

它不是電容，因為HTC稱它可以 與手套使用。

Squeezable sensors built into the aluminum frame.

抬起塑膠電纜後有 一個塑料支架，包圍

The theory here is that the metal sides of the phone can be squeezed, or flexed, and

訊號天線。

it can act as a trigger or button for different apps, or features on the phone, like the camera.

這很容易脫落。

Its not capacitive , because HTC says it can be used with gloves.

而我們看到了壓力傳感器。

After lifting up the ribbon cable there is a plastic bracket, with groves to run the

它有四個單獨的關節。

signal wires.

緊附著在金屬框上。

This comes off easy enough.

我想我可能無法在不破壞它的情況下拆除。

And we get our first glimpse of the actual pressure sensor.

靈活的壓力傳感器不是一個新事物， 這種相同類型的技術之前

It has four individual joints.

出現在任天堂力量手套。

And is extremely well adhered to the metal frame.

HTC是第一家裡把它放在金屬下面的。

I don't imagine this can be removed without damaging it permanently.

我認為，作為手機的金屬邊 彎曲時，該設備被擠壓時，電阻

Flexible pressure sensors aren't a new thing, This same type of technology was used inside

在每個關節的變化，告訴手機 該處已經被觸發了。

inside the ol' Nintendo Power gloves back in the day.

隨著更多的拆解，這個功能可能 是沒用了。

HTC is the first company to stick it inside a phone though, underneath metal.

為嘗試新事物的HTC豎起大拇指。

I assume that as the metal sides of the phone flex when the device is squeezed, the resistance

突破其他大多數手機被卡的現狀

changes across each of the joints, telling the phone that the grip has been triggered.

最好的最敏感的擠點 在手機右側下半部分

With a more ridged frame, this feature probably wouldn't work.

其中傳感器位於。

Huge thumbs up to HTC for trying something new.

手機重新組合一起是很容易的， 把USB周圍的橡膠墊圈放回去

And stepping out of the same rectangular box that most other cell phones are stuck in.

到框架，確保沒有連接器被卡在板的下方

The ideal, most sensitive, squeeze points would be on the lower half of the phone right

然後讓四個塑膠電纜連會去 附接到所屬的板

where the sensors are located.

把白線電纜連會去。

Getting the phone back together is easy enough, ill stick that rubber washer around the USB

把揚聲器裝回去。

C port and tuck it down into the frame, making sure no connectors are stuck underneath the

右上方螺釘，然後將小塑料 盾蓋在整個組件的上面。

board.

7顆螺絲放回原位。

Then after getting the four ribbon cables attached to the top of the board and the one

在側軌柔性傳感器旁放入小塑料保護蓋。

white wire cable snapped in.

在我把掉壓力感應器後 我不抱任何期望它還可以用

Ill toss on the loud speaker.

但還是把它放回去呢。

The top right screw, and then the little plastic shield can go over the top of the whole component.

主機板先進入頂部框架。

And the 7 screws that hold it all in place.

然後像所有的連接樂高 沿著底部接回去

The flex sensor on the side rail goes in next with its little plastic guard.

你會覺得他們在扣在主板上 像小樂高。

I have zero expectations of this functioning anymore now that i've removed it.

螢幕，擴展和壓力 上側軌傳感器。

But Ill still put it back anyway.

白色和黑色電線電纜在右側。

Mother board gets tucked down top first into the frame.

有一點金屬夾子夾 幫助線電纜到正確的位置。

And then all of the lego like connections along the bottom get clicked in.

在主板的底部還有一個螺絲。

You'll feel them snap in onto the motherboard under your finger like a little lego.

最後是電池放置和插入。

The screen, the extension,and the pressure sensors on the side rails.

罩主板的塑料採用了五個螺絲。

And also the white and black wire cables along that right side.

我可以開機做一個測試手機。

There are little metal clips guiding clips that help line the cables into the right spot.

看！

One more screw at the bottom of the motherboard.

它完好如新。

And lastly the battery gets plopped back into place and plugged in.

現在，在後玻璃面板將肯定需要 黏膠，一些連結在

The plastic shield goes over the top of the motherboard with its five screws.

影片完整資訊。

And I can do a test run with the phone by turning it on.

但HTC U11背面玻璃的確可以成為 透明的。

And look!

有塑料塗層在超精細塗料層上。

Its as good as new.

它是一種硬質很容易刮取到 閃亮的塵。

Now the back glass panel will definitely need its own adhesive, so Ill link some in the

它應該不需要像Galaxy S8一樣的脫漆劑。

video description.

我不會做這件事，因為 這將是像把一個新的油漆工作

But the HTC U11 back glass can indeed become clear.

在失事的法拉利。

There is a plastic coating, over the top of a super fine paint layer.

看看我能不能修這個電話之前 我不會進行任何修改。

Its a hard substance and scrapes off into shiny pixie dust pretty easy.

如果你想在網路上創作並想嘗試使用Graphic Stocks Unlimited

It shouldn't need any paint remover like on the Galaxy S8.

下載圖片、照片和向量圖型 我放了一個免費七天試用在這個影片的

I'm not going to do the whole thing, because that would be like putting a new paint job

完整資訊中。

on a wrecked Ferrari.

我想看到你做了什麼， 所以在推特使用 #creator2creator 標籤以通知我。

Ill see if I can fix the phone first before I continue any modifications.

它幫我省時間，而不用自己試圖創造一些圖片

If you creating stuff on the internet and want to try using Graphic Stocks unlimited

看看他們的圖書館，看看是否有任何 有用的。

downloads of graphics, photos, and vectors I put a free 7 day trial for you in the video

連結在完整資訊裡。

description of this video.

如果你有任何問題，請留言讓我知道， 或是你需要任何特定部位的零件，

Id love to see what you make, so tweet it over to me using #creator2creator hashtag.

為了你壞掉的手機。

It saved me time being able to jump on and grab some images instead of trying to create

非常感謝您的收看！

my own from scratch.

下次見。

Take a look at their library and see if anything will work for your projects.

The link is in the description.

Let me know If you have any questions in the comments, or if you need any specific parts

for your broken phone.

And thanks a ton for watching!

Ill see you around.