They were taking a look here at the master grade A fast Birkoff from gonna sentinel.

And it's a pretty awesome kids, especially if you're gonna sentinel fan like myself and vour coffin like myself.

So if you guys didn't see the Unboxing or the live build of this and go back and check those out, we went through all the runners and during a live build, we spent like four and 1/2 hours going through building this kid because it's a pretty big kit and there's a ton of parts, so it takes a good while to get it put together.

Obviously, I was spending a lot of time just chatting with the people watching live, of course, and we had to give away at the time as well.

So thank you to Patrick for donating one of these for the giveaway.

But also, of course, is need to say thank you as well to us.

I got in store for their support.

If you guys want to check out this kid, you can check out link down below to us a goddamn store there.

And also my coupon code there.

Zach Aurelius 10.

You can use on this kid or anything else there on the website to save 10% off all that.

So pretty awesome, kid.

And if you've built the doubles eight of work, obviously for the most part of the body is gonna be pretty much mostly the same.

With the exception of a few changes here and there, pretty much all the new parts for this are going to be all the exterior armor.

And, of course, that massive mega cannon that has.

So that part was a ton of fun to build.

So we'll take a look through everything here in a moment.

First off, I just want to start off by showing you guys the accessories that come with this other than just what you can see there on the kit now itself.

So just a reminder that you did have some foil stickers here for this kid.

Basically, for the eyes and the different cameras around on the weapons and on the front of the chest there.

And then these two, which I didn't use Those go on the clear parts on the top of the legs.

You're never gonna see those parts, so I didn't bother putting those on.

But also, we can forget about this very large and beautiful sheets of waterside decals.

Again clear with this.

One of the greatest things about Birkoff kids is all the details.

And some people may not like the massive amount of vehicles, and there sure is a lot, but they look fantastic.

So you have them and mostly white and red with a couple of great ones on there.

But some pretty standard Birkoff styling for this.

And it looks so good, pretty bare minimum in terms of hand options.

You have the swappable fingers for this kid, and I'll make it there.

Just got the closed fist on the left on the right side.

The only other option that you have with this basically is just this trigger finger hand for holding on to the double beam rifle.

And that's it for the official hand options you have for this.

No, of course it does.

Also come with an action based connector.

Will use that here in a bit, and that is a couple of option parts here.

If you opt to not have the mega cannon on there, then you can use this part which goes in the front of the shoulder.

You can see the one on the left side.

There we have one for the right side as well.

If you're using the mega cannon, though, you need to omit this part.

And then also for the backpack, you have the missile pot there, which we've got two of.

And if you're gonna use the mega cannon that you're not gonna use this one, you have just this piece extra, though.

If you want to take that off, you can put this in in its place and have two missile packs on the backpack instead.

Another those little things.

This is only really main accessory that the kid has is the double beam rifle here so very similar to the one that came with the regular double Zeta Gundam.

But it's gonna be a little bit different here styling, most notably here in the double barrels.

So you got some really nice parts there and no seam line on those as the seam line all the way down here is just made up as a panel.

I know if you didn't want there to be a panel in there, if you wanted this to just be completely solid, you'd have to plenty that in and do a whole bunch of standing around on that.

But as it is banned, eyes got you covered by just turning that seam line into a panel line.

You don't really have to worry about.

That's that looks nice and got this nice, separate part there for little holes there.

You have to separate Great piece inside there, the camera on the top.

We have a clear part for that, but I just have the sticker placed on there for the time being That just folds down like that.

And then this part handle folds back in like that, and this will just attach onto the army also have this clear part here on the back of their no pilot figure in there that's just empty inside.

But that does Open up your eyes closed that back down there like that Now, like I said, this could just be attached onto the back of the arm by just simply slotting into place.

You can hold it in the hand with the rifle trigger finger holding hand if you want to use that just in hand.

or you just strap it.

They're onto the back of the arm and it works out just fine.

Like that?

Something that's pretty good.

No, that's it for the official accessories.

We do have ah lot of leftover parts here with this.

Now, you can make some stuff here with leftover parts.

Those go ahead and show that to you here.

First thing would be the full corps fighter and the optional clear parts there for the landing gear for the woman that you can admit that if you want.

But with the manual of this, this is technically not really used with this, But these parts are also not crossed off in the manual.

So it might be a little bit confusing for you guys if you're just cutting off in, like tossing out all the leftover parts.

Thes parts aren't crossed off, but it's just building the corps fighter and according to the manual, twice.

And you just use the clear parts there for landing gear for that, you know, of course, have another set of lending year, but just not really gonna be of too much use for you.

So this one does have a little pilot figure sitting inside there and again.

It's just the same thing as what's actually inside the body there.

This is just the expanded form of that just transforms in order to hold it up.

To put it inside, the room will suit, but you have a 2nd 1 of those.

We have the full double Zeta Gundam ahead here.

The only thing that's missing is the polar cap for connecting on to the next.

You only have one of that Polly caps.

You'd have to choose what you want in the fast said or the double Zeta head.

It's a pretty basic ball and socket joint, Polly cap.

So I have a feeling you might have a left over one of those lying around somewhere if you keep your leftover polar caps.

But either way, it wouldn't be too hard to scratch.

Build something if you do want to adapt this onto a different kids, some of their custom builders in like that, you have the full double date.

A Gundam head here in fads colors.

That's pretty cool.

Get all the parts here to make They're gonna wing binder things which attach onto these sides of the arms of a double date.

A gun on him now.

I built this up in both ways to show you guys that you have both the standard version and the enhanced A diversion with a little bit longer wings on the top so you can make them in either way if you want to have all the parts to make those and whichever version if you want.

If you just have the regular standard double date again, if you can give it the enhanced double Zeta Gundam wing parts for that which is pretty cool.

You have the top shoulder armor parts for the double date, a gun as well.

So if you're building this, for example, without all the extra armor on there, you could use these for the top of the shoulder instead of just the white long ones that you have.

It's the additional armor for the fast.

You also have the barrel parts of the full armor doubles Ada double beam rifle here.

If you didn't like the fast I'll if you just like to ask the just regular double Zeta style double beam rifle, you can use those instead.

It doesn't have the silver part, though The parts that were molded in plated silver with the double date A burqa for this kid are molded in black.

So it would be a little bit different there.

Yeah.

Are what arms Gil pellet figure included with this?

The same as with the double date A Gundam for calm.

But again, it's just not gonna be technically used for this kid.

The last thing I'll point out, you can see here on the back.

We do have what looks like the beam saber handles similar to like the double state of our Kaba.

Those are not actually meant to be Beam saber handles, as the fast doesn't use those as beam saber handles that can be used as being cannons as they're just taken from the S condom.

But we do have amongst our extra parts for this kid are the holding hands to hold those.

So if you had a spare set of 1 60 scale beam saber effect parts for those, you could use those here with this hand.

You obviously would have to take the thumb in the back of the hand from the hand we've got over there.

Basically.

Just see, you swapped the finger parts here.

They do also have these among your extra parts as well.

This is the one from the double date of our con.

This one is from the enhanced double Zeta.

I believes the longer type version of that.

So, yeah, these hands can hold onto these just fine like that.

You just need yourself.

The beams.

They were effect parts for that.

If you wanted to actually use these.

Although the facts is not technically supposed to use them.

You could if you wanted.

D'oh!

He had us.

Aside from that, you have still a bunch of other leftover parts as well.

Not really a whole lot of it of too much use, but some interesting bits in there.

If you want to get a little creative with your kid, I want to go through some of the articulation of this kids.

We're gonna start off with the hyper mega cannon here because then I'm going to remove it when we go through, the rest of the articulation goes, Obviously just gonna be kind of in the way.

So first off, just really cool.

Like I said before construction of this, it was a lot of fun to bill.

There's no seam lines on this.

The way to the parts go together that cover up all the same lines on it here on the back.

What would be a seam line between the two main half of these parts here once again is just made up as a panel.

I'm there, so don't worry about that.

This little antenna bit here on the top can move up and down a little bit.

This part here can also move up and down a little bit like that.

When that is up, you have some detail inside there.

Another lot, A little bit up in there.

This little bit here on the side can move up and down a little bit there, like that up underneath this hatch here will fold down like that and up inside there you can fold down to handle if you wanted to actually have it holding on to this like that, so that can be handheld.

Otherwise, just the whole design of this is pretty cool.

The inlaid of yellow parts there look nice for that's got some nice detail on their these like cable parts.

Not really too keen on the fact that those Aaron Gloss Black.

They're nice just in their detail going around here onto this.

I got a couple more over there.

So those air nice details to be added on to their butt in.

Maybe you're just not so glossy.

Black.

Maybe it would have been nice if this does have some movement in it.

But you just have to be careful with the belt here cause that can come out if you're not careful with that.

These bars, by the way, taken from the master grade Heavy arms Gundam.

Uh, it's just gonna be the same parts with those.

So this just goes around there and plugs into the back skirt.

There's a point of side to side articulation here where you can move that left.

And right now it does have a limit.

It can only go that far to the left.

So basically just like straight ahead.

And it's meant to go Maur over to that side.

As you can see, it can go pretty far off to the side there and then back here you have a point of articulation to go left and right like that to lean that off a little bit off to the side like that.

And then, of course, here you have an up and down point of articulation.

But again, I'm gonna be really careful not to pull that too far to stretch this cable there.

So you're not really gonna be able to move that too far, But you can move that a little bit off a nun.

I think if you're careful with it, maybe a little bit farther up, but not really too much range up, one down, moving on that.

And lastly, this whole section here can also slide up and down a little bit, and so it's gonna be kind of hard.

It's kind of hard to stick their but yeah, this can move up and down a little bit like that.

When you move this up, it kind of makes it a little bit higher up off the shoulder to get kind of a better angle there.

When it's pressed all the way down, just gonna be closer to the body like that so you can see how that's just gonna make a little bit of events there like we saw before on this side.