Name: 你一定要看看這個小電腦盒! (You NEED to see this small PC case!)
Uploaded: 2021-01-14T09:45:23.000Z
Duration: 21 min 17 s
Description: 【看影片學英語】數萬部 YouTube 影片，搭配英漢字典即點即查，輕鬆掌握單字發音與用法，長久累積看電影不必再看字幕。

So over the years, we have seen quite the dynamic shift in design concepts that case manufacturers seem to emphasize.

I guess we have seen the small if I ng and the big defying and then the Reese mollifying in the middle of flying and now back to smaller flying once again.

And I think the reason for that is that hardware has gotten stronger and more powerful, and Maura's Law started to taper off when we started.

To be able to do is to Kate take the amount of technology and the speed and the power and just shrink it.

And with that, we've been seeing quite the shrinkage, if you will, and cold weather of computer cases.

We've dunmore small form factor bills, I think in the last year, year and 1/2 on this channel that I've ever done or ever seen.

So what we're looking at right here is actually a brand new chassis that is quite the departure from the typical form factor you would see from something like NZX t.

Where the H 2 10 was the smallest that they kind of offered, and then they took it and just sort of an of it, I guess for now we've got a 13.6 liter trash can if you are over.

So I'm calling trash cans because it seems like what used to be the case.

The case back in the day was that we take a chassis inches and make a small another, realizing, you know what?

Vertical height, just like downtown architecture is like, Hey, the footprint on the table does not mean we can't utilize vertical space.

So you're seeing a lot more of these towers.

Definitely, um, subscribes to that design philosophy, so it's kind of interesting because it's completely Tulis.

And what I mean by that is you've got the glass panel in the front.

You've got this panel in the back and you could see that just pops off.

There's no filter on their, um, we'll talk.

We'll go and pull the front panel off, which is tempered glass, and this probably easier to pull off bottom right here.

As you can see, I've got the peel plastic on their still.

People don't get the importance of the peel way.

So as you can see, we've got both side panels off.

Now, once you take the side panels off, you'll see is these two holes right here?

There's two holes right there that these little tabs on the side panels both on the glass and the mesh panel.

So now that you got the two side panels off, you can lift this guy up.

When you do that, you then get access to all four sides of the chassis.

Now, you might notice we just one box the case.

But we've got an SFX l 650 watt power supply that's already pre installed with the relocation bracket for the power connector relocated to the bottom of the case.

And we also have a 140 millimeter a Iot in here, which is perfect because, well, that's pretty clever.

The the actual box for the accessories is kind of shaped like a deep you and it's right in here where the GP would go.

Because the reason for that is the tubing run in this is gonna be pretty bespoke.

I'm using the word bespoke has feel used earlier.

And I'm like, Oh, yeah, that's a that's a fancy word for custom.

So include, with that a Iot, though it's obviously going to, um, work with your many I t x motherboards.

And the cool thing about that is you have many i techs options now that exists for both risen Andy based systems and intel, which is kind of nice, because we all know that reason is definitely leading right now in terms, off core performance and the number of course in the mainstream CPU.

And when you have a small form factor like this, any advantage you can get to cooling is is obviously gonna be important because even a 140 millimeter a Iot like this is gonna do a better job than any air cooler that you could possibly fit in this particular form factor.

Now the graphics card is installed on the backside of the motherboard, which is the car compartment compartment, the compartmentalization.

So the chamber designed So the chamber designed like this is gonna do a good job at separating the heat that's gonna be generated by the GPU and the CPU.

So I think I see you have a riser card here, though That's also for connecting your graphics card.

It's got this really beefy, robust, mounted down riser card.

And then this is the one that folds over here and connects to your graphics card.

And when I think kind of funny is actually have, like, this foam piece in here, that sort of represents your motherboard.

Where that's gonna go now to access your motherboard, you obviously have to get a a Iot out of the way.

So as you can see, the IOA is mounted with these four screws to this piece.

But he even has a little label right here.

Geez, I got like a strong man to put the screws in from the factory screws, and then this just folds out of the way.

These are not captive screws, so keep them See that?

The little door foam piece for transit here is our a Iot right here.

Um, this is not the same exact set up, though, is if you were to buy this separately because, like I said, as you could see these air very specific runs for this particular chassis.

If you look at the top of the radiator right here, it's actually quite different in the way this all amounts the way the tubes come out.

And then when you're ready to install your graphics card or your CPU and your motherboard, you moved the foam out of the way be mounted down to these four right here and then your setup is pretty much ready to go.

So what will happen is once you close this guy back down and you install the proper installation, mounting hardware, which I'm going to just on a hunch assume is in this box you got your different mounting solutions here.

And, um, Intel's already pre pre installed.

You've got your power cable That's pretty much all that's in here.

You also have what appears to be an audio splitter for a single 3.5 millimeter Jack like you'd find on a headphone or a phone to ah, break out cable right here So you could install both your analog mike and headset for headphones.

That way, once you close this, your motherboard is in there than all of the connections are in the bottom.

Once this is closed, if we rotate this right here, you can see the power plug is relocated down to the bottom and all your input output is also right here for your graphics card as well as your motherboard.

So everything will be coming out the back at the bottom.

Not like having cable straight down and looking kind of ugly.

So as you can see two you have these Velcro straps that air tying down the power cables coming out of the SFX all power supply.

But the 24 pin is already in the general place that it would need to be same thing with your CPU pins or your CPU power headers right here for connectivity.

We've also got the pretty standard, usual suspects.

You've got your HD audio, which who really uses these that much anymore.

You've got your USB or your front panel connector, which I'm so happy that it produced standardised this now.

So I said, trying to plug in all the individual plugs, which could be very annoying.

They're pretty much all in the same layout.

Oh, and then we have our USB three point.

Oh, because this is a 650 watt SFX gold rated power supply, you would be able to run all the way up to 28 e t I off of this.

And if we take a look at the power connectors here, we've got to eight pin PCU power with two more off of pigtails.

So if your card uses a triple slot cooler where it's got three of these plates, if you will, that's not gonna fit because this only has room for two.

This is a 2.5 they call it because it only uses about half the additional height above that bracket.

But I'm really curious as to how big of a graphics card we can fit in here.

We still have some available height right here can get, you know, get four fingers in there.

There's a few millimeters of gap, so I'm fairly certain the fans will turn without obstructions.

So, as you can see, we did for a strict style cooler in there, which is much bigger than any reference card.

And then, with the power plugs being right here, it's still clears this PCB with plenty of room to plug them in.

And as you can see, they do give you some slack here.

字幕列表影片播放

你一定要看看這個小電腦盒! (You NEED to see this small PC case!)

sort

access

positive

aesthetic